The time series (TS) of the normalized difference vegetation index (NDVI) has been widely used to trace the temporal and spatial variability of terrestrial vegetation. However, many factors such as atmospheric noise and radiometric correction residuals conceal the actual variation in the land surface, and thus hamper the TS information extraction. To minimize the negative effects of these noise factors, we propose a new method to produce a synthetic gap-free NDVI TS from the original contaminated observation. First, the key temporal points are identified from the NDVI time profiles based on a generally used rule-based strategy, making the TS segmented into several adjacent segments. Then, the observed data points in each segment are fitted with a weighted double-logistic function. The proposed dynamic weight reassignment process effectively emphasizes cloud-free points and deemphasizes cloud-contaminated points. Finally, the proposed method is evaluated on more than 3,000 test points from three selected Sentinel-2 tiles, and is compared with the generally used Savitzky-Golay (S-G) and harmonic analysis of time series (HANTS) methods from qualitative and quantitative aspects. The results indicate that the proposed method has a higher capability of retaining cloud-free data points and identifying outliers than the others, and can generate a gap-free NDVI time profile derived from a medium-resolution satellite sensor.

Monitoring agricultural abandonment is essential in understanding the effects on the environment and food security. Polarimetric synthetic aperture radar (PolSAR) is an efficient approach for the monitoring of large-scale agricultural land cover in cloudy and rainy areas. However, previous studies have not taken advantage of the valuable phase information and not fully utilized the spatiotemporal features of farmland parcels, which has seriously limited the abandoned land identification accuracy. In this study, we developed a new method for the mapping of abandoned land based on the spatiotemporal features from PolSAR Single Look Complex (SLC) images via deep learning methods. First, backscattering coefficients (σ⁰VV, σ⁰VH) were derived, and the polarimetric parameters (entropy, anisotropy and mean alpha angle) were obtained based on Cloude–Pottier polarimetric decomposition. Then, the VGG16 deep convolutional network was innovatively used to extract spatial features from both the backscattering coefficients and polarimetric parameters. Next, the separability index was calculated to select the most effective spatial features. Finally, LSTM classifications were conducted based on the time series of backscattering features, the polarimetric parameters, the extracted spatial features and their combinations. The results showed that the introduction of multitemporal polarimetric parameters and spatial features both led to an improvement in the abandoned land identification accuracy. The combination of backscattering features, polarimetric parameters and spatial features yielded the best performance in identifying abandoned land, with producer’s accuracy of 88.29% and user’s accuracy of 84.03%. This study demonstrated the potential of polarimetric parameters and validated the effectiveness of spatiotemporal features in abandoned land identification. It provided a practical method for the production of a highly reliable abandoned land mapping in cloudy and rainy areas.

Accurate phenological information on sugarcane is crucial for guiding precise cultivation management and enhancing sugar production. Remote sensing offers an efficient approach for large-scale phenology retrieval, but most studies have primarily focused on staple crops. The methods for retrieving the sugarcane phenology—the germination, tillering, elongation, and maturity stages—remain underexplored. This study addresses the challenge of accurately monitoring the sugarcane phenology in complex terrains by proposing an optimized strategy integrating spatiotemporal fusion data. Ground-based validation showed that the change detection method based on the Double-Logistic curve significantly outperformed the threshold-based approach, with the highest accuracy for the elongation and maturity stages achieved at the maximum slope points of the ascending and descending phases, respectively. For the germination and tillering stages with low canopy cover, a novel time-windowed change detection method was introduced, using the first local maximum of the third derivative curve (denoted as Point A) to establish a temporal buffer. The optimal retrieval models were identified as 25 days before and 20 days after Point A for germination and tillering, respectively. Among the six commonly used vegetation indices, the NDVI (normalized difference vegetation index) performed the best across all the phenological stages. Spatiotemporal fusion using the ESTARFM (Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model) significantly improved the monitoring accuracy in heterogeneous agricultural landscapes, reducing the RMSE (root-mean-squared error) by 21–46%, with retrieval errors decreasing from 18.25 to 12.97 days for germination, from 8.19 to 4.41 days for tillering, from 19.17 to 10.78 days for elongation, and from 19.02 to 15.04 days for maturity, highlighting its superior accuracy. The findings provide a reliable technical solution for precision sugarcane management in heterogeneous landscapes.

Early-season sugarcane identification plays a pivotal role in precision agriculture, enabling timely yield forecasting and informed policy-making. Compared to post-season crop identification, early-season identification faces unique challenges, including incomplete temporal observations and spectral ambiguity among crop types in early seasons. Previous studies have not systematically investigated the capability of optical and synthetic aperture radar (SAR) data for early-season sugarcane identification, which may result in suboptimal accuracy and delayed identification timelines. Both the timing for reliable identification (≥90% accuracy) and the earliest achievable timepoint matching post-season level remain undetermined, and which features are effective in the early-season identification is still unknown. To address these questions, this study integrated Sentinel-1 and Sentinel-2 data, extracted 10 spectral indices and 8 SAR features, and employed a random forest classifier for early-season sugarcane identification by means of progressive temporal analysis. It was found that LSWI (Land Surface Water Index) performed best among 18 individual features. Through the feature set accumulation, the seven-dimensional feature set (LSWI, IRECI (Inverted Red-Edge Chlorophyll Index), EVI (Enhanced Vegetation Index), PSSRa (Pigment Specific Simple Ratio a), NDVI (Normalized Difference Vegetation Index), VH backscatter coefficient, and REIP (Red-Edge Inflection Point Index)) achieved the earliest attainment of 90% accuracy by 30 June (early-elongation stage), with peak accuracy (92.80% F1-score) comparable to post-season accuracy reached by 19 August (mid-elongation stage). The early-season sugarcane maps demonstrated high agreement with post-season maps. The 30 June map achieved 88.01% field-level and 90.22% area-level consistency, while the 19 August map reached 91.58% and 93.11%, respectively. The results demonstrate that sugarcane can be reliably identified with accuracy comparable to post-season mapping as early as six months prior to harvest through the integration of optical and SAR data. This study develops a robust approach for early-season sugarcane identification, which could fundamentally enhance precision agriculture operations through timely crop status assessment.

Crop residue open burning is a major source of atmospheric pollutants that degrade regional air quality, enhance climate forcing, and threaten public health through emissions of particulate matter, greenhouse gases, and toxic species. In southern China, satellite-based emission estimates are often underestimated because frequent cloud cover and limited spatiotemporal resolution hinder the detection of agricultural fires. In this study, crop residue open burning emissions in Guangxi province from 2017 to 2023 were quantified using a statistical approach. The open burning proportion (OBP) was updated on an annual basis using the Visible Infrared Imaging Radiometer Suite (VIIRS) 375 m active fire product (VNP14IMG), and recently reported emission factors (EF_S) were adopted to enhance estimation accuracy. Annual emissions of pollutants were then spatially distributed to 0.05° × 0.05° grid cells based on satellite-detected fire counts and land cover information. The results indicated the total emissions of black carbon (BC), organic carbon (OC), sulfur dioxide (SO₂), nitric oxide (NO_X), carbon monoxide (CO), carbon dioxide (CO₂), fine particles (PM_2.5), coarse particles (PM₁₀), ammonia (NH₃), methane (CH₄) and non-methane volatile organic compound (NMVOC) in Guangxi province during 2017–2023 were 58.90, 230.48, 37.90, 213.95, 4234.41, 108,775.48, 583.09, 667.70, 46.36, 322.74 and 710.20 Gg, respectively. Sugarcane residue burning was identified as the dominant contributor, accounting for 41.26–64.38% of total emissions, followed by rice (20.66–43.06%), corn (5.11–17.25%), and cassava (4.33–6.45%). Emissions exhibited clear interannual variability, declining from 2017 to 2020 under strict control measures and increasing again from 2021 to 2023 as enforcement weakened. Incorporating annually updated VIIRS-derived OBP_S into the statistical inventory improves the temporal representation and reliability of multi-year emission estimates for agricultural burning.

Citrus, as a globally important economic crop, requires accurate assessment of premium fruit production potential for precise orchard management and enhanced economic benefits. This study develops a method for assessing the production potential of premium citrus using UAV-based multispectral imagery and ground data. Taking citrus orchards in Wuming District, Guangxi, China, as the experimental area, this study investigates techniques for assessing the production potential of premium fruit at the canopy scale of citrus trees in southern hilly regions, aiming to rapidly predict the quality production potential of citrus before fruit ripening. The methodology involved the following: (1) Segmenting the study area using a Digital Surface Model (DSM) and extracting individual tree canopies by integrating NDVI with a marker-controlled watershed algorithm. Canopy fruit boundaries were identified using the NPCI index. (2) Selecting key assessment indicators—NDVI, TCAVI, REOSAVI, canopy area, and canopy fruit area—through correlation analysis with nutritional quality metrics. (3) Establishing threshold levels for these indicators and constructing a production potential assessment model. Experimental results demonstrated an individual tree identification accuracy (precision) of 98.75%, a recall of 98.47%, and an F-score of 98.61%. Canopy area extraction achieved a coefficient of determination (R²) of 0.869 and a root mean square error (RMSE) of 0.489 m². The overall accuracy for production potential assessment reached 85.11%. This study provides a new approach for using UAV multispectral technology to non-destructively assess the production potential of premium citrus in the hilly regions of southern China, offering technical support for precise orchard management.