Keiinbay Symaiyl

Dr. Keiinbay Symaiyl


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2026 in Coatings
Verified
Journal Article
Open access
PDF file
KSKeiinbay Symaiyl
Keiinbay Symaiyl
KNKair Kh. Nussupov
Kair Kh. Nussupov
ASAssanali Sultanov
Assanali Sultanov
IZIlya V. Zhirkov
Ilya V. Zhirkov
NBNurzhan B. Beisenkhanov
Nurzhan B. Beisenkhanov
Alex A. VolinskyAlex A. Volinsky
Alex A. Volinsky
In this study, the diffusion barrier performance of TiN and SiC layers was investigated in Si/TiN/Cu, Si/TiN/SiC/Cu, and Si/SiC/TiN/Cu multilayer structures to address copper diffusion issues at silicon interfaces in microelectronics. Samples were annealed in argon at 500–800 °C for 30 min, and diffusion behavior was analyzed using X-ray diffraction (XRD) and sheet resistance measurements. The Cu3Si phase formed at 600 °C in the Si/TiN/Cu system, while no Cu3Si appeared in the Si/SiC/TiN/Cu system up to 700 °C, indicating improved stability. Complete copper diffusion occurred in all systems at 800 °C. Sheet resistance measurements corroborated the XRD findings, demonstrating that multilayer structures incorporating TiN and SiC significantly enhance thermal stability and suppress copper diffusion. Comparison of Si/SiC/TiN/Cu and Si/TiN/SiC/Cu stacks annealed at 700 °C revealed that the stability of TiN depends on layer sequence, with SiC effectively blocking Cu migration into TiN when placed adjacent to Cu. Structural and morphological properties of TiN films were also examined, confirming their suitability as diffusion barriers. Additionally, the feasibility of forming a low-resistivity TiSi2 layer through a single annealing step to create a TiSi2/TiN system was explored, highlighting potential applications in advanced device integration.

1 July 2023 in Herald of the Kazakh-British technical university
Verified
Journal Article
Open access
PDF file
KNK. Kh. Nussupov
K. Kh. Nussupov
NBNurzhan B. Beisenkhanov
Nurzhan B. Beisenkhanov
Sergey KukushkinSergey Kukushkin
Sergey Kukushkin
ASA. T. Sultanov
A. T. Sultanov
KSKeiinbay Symaiyl
Keiinbay Symaiyl
AKA. Zh. Kusainova
A. Zh. Kusainova
In this work, monocrystalline films of silicon carbide were synthesized on the surface of a Si(100) silicon wafer using the method of coordinated substitution of atoms. The films were synthesized at temperatures of 1200 °C and 1300 °C for 20 minutes in a CO gas flow at a pressure of 0.8 Pa. The effect of 1200–1300 °C temperatures on the formation of single- and polycrystalline layers, as well as nanostructured SiC phases in the near-surface region of silicon by the method of atom substitution, is analyzed. The formation of a high-quality crystalline silicon carbide film and the influence of synthesis conditions on the total volume of SiC structural phases, microstructure and nanostructure of the surface are shown. It was found that an increase in temperature from 1200 °C to 1300 °C led to a more intensive formation of silicon carbide and an increase in the number of Si–C bonds by 1.9 times due to an increase in the thickness of the synthesized silicon carbide layer. There is an increase in the proportion of the crystalline phase due to a more intense transformation of the nuclei of nanocrystals into micro- and nanocrystals. Intense processes of penetration of carbon atoms deep into silicon at a temperature of 1300 °C with amorphization of its structure and the formation of Si-C, which can transform into crystalline phases at temperatures above 1300 °C, are assumed. The proportion of the SiC crystalline phase increases to 50.2% of the film volume due to the intensive transformation of nanocrystal nuclei into micro- and nanocrystals. It has been experimentally shown that the formation of various SiC structures on Si (100) occurs in full accordance with the main principles of the method of coordinated substitution of atoms.

3 October 2024 in Herald of the Kazakh-British technical university
Verified
Journal Article
Open access
PDF file
KSKeiinbay Symaiyl
Keiinbay Symaiyl
KNK. Kh. Nussupov
K. Kh. Nussupov
ASA. T. Sultanov
A. T. Sultanov
ITIda Tyschenko
Ida Tyschenko
AEA. Ph. Eshanov
A. Ph. Eshanov
СКС. Кейінбай
С. Кейінбай
The films of titanium nitride were deposited by direct current magnetron sputtering on the surface of singlecrystalline silicon samples in an Ar-N2 atmosphere for use as a diffusion barrier. The thickness and density of films were measured by X-ray reflectometry. The design of the MAGNA TM-200-01 installation has been changed to increase the supply of nitrogen into the chamber. The influences of sputtering conditions, including the flow rate of nitrogen and argon gases and their N2 /Ar ratios in the range of 1–60 in the chamber, magnetron power of 690–1400 W on the formation of TiNx films, their density and stoichiometric composition, were studied. It is shown that the value of x is affected not only by the N2 /Ar gas flow rate ratio, but also by the magnetron power. At the sputtering parameters 1200 W, N2 /Ar = 30, 0.8 Pa, 320 s and 100°C, a maximum density of 5.247 g/cm3 of a film was achieved, which corresponds to the composition TiN0.786 = Ti56N44. The presence of nanocrystalline film of titanium nitride and the absence of a nanocrystalline titanium phase were confirmed by photographic X-ray diffraction. It was found that for the synthesis of titanium nitride as close as possible to the stoichiometric composition TiN0.770 - TiN0.786, it is necessary to use magnetron power in the range of 900–1200 W, nitrogen rate of 30 cm3 /min with low argon flows of 1–5 cm3 /min.

6 October 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
KSKeiinbay Symaiyl
Keiinbay Symaiyl
KNKair Kh. Nussupov
Kair Kh. Nussupov
NBNurzhan B. Beisenkhanov
Nurzhan B. Beisenkhanov
Alex A. VolinskyAlex A. Volinsky
Alex A. Volinsky
Titanium thin films were deposited on crystalline silicon substrates by DC magnetron sputtering and annealed by rapid thermal processing under vacuum and nitrogen environments. X-ray diffraction, atomic force microscopy, and four-point probe measurements were used to evaluate phase formation and electrical properties. Annealing at 600 °C for 5 min in 10−3 Pa high vacuum produces the C54-TiSi2 phase, reducing sheet resistance from 56 Ω/sq to 1.94 Ω/sq. Lowering the synthesis temperature from 923 K to 873 K decreases radiative energy consumption by approximately 20%. In contrast, annealing in N2 atmosphere yields Ti5Si4 and TiN instead of TiSi2. A combined thermodynamic and diffusion model explains the observed phase selectivity under vacuum and nitrogen environments.