The demand for flexible and wearable electronic devices with excellent stretchability and sensitivity is increasing, especially for human motion detection. In this work, a simple, low-cost and convenient strategy has been employed to fabricate flexible strain sensor with a composite of carbon black and silver nanoparticles as sensing materials and thermoplastic polyurethane as matrix. The strain sensors thus prepared possesses high stretchability and good sensitivity (gauge factor of 21.12 at 100% tensile strain), excellent static (almost constant resistance variation under 50% strain for 600 s) and dynamic (100 cycles) stability. Compared with bare carbon black-based strain sensor, carbon black/silver nanoparticles composite-based strain sensor shows ~18 times improvement in sensitivity at 100% strain. In addition, we discuss the sensing mechanisms using the disconnection mechanism and tunneling effect which results in high sensitivity of the strain sensor. Due to its good strain-sensing performance, the developed strain sensor is promising in detecting various degrees of human motions such as finger bending, wrist rotation and elbow flexion.
Aiming at protection of high speed data, field programmable gate array (FPGA)‐based advanced encryption standard (AES) design is proposed here. Deep investigation into the logical operations of AES with regard to FPGA architectures leads to two efficient pipelining structures for the AES hardware implementation. The two design options allow users to make a trade‐off among speed, resource usage and power consumption. In addition, a new key expansion scheme is proposed to address the potential issues of existing key expansion scheme used in AES. The proposed key expansion scheme with additional non‐linear operations increases the complexity of cracking keys by up to 2
(
N
− 1)
times for N ‐round AES. The proposed design is evaluated on various FPGA devices and is compared with several existing AES implementations. In terms of both throughput and throughput per slice, the proposed design can overcome most existing designs and achieves a throughput of 75.9 Gbps on a latest FPGA device. Two parallel implementations of the proposed design can meet the real‐time encryption/decryption demand for 100 Gbps data rate. Furthermore, the proposed AES design is implemented on the Zynq xc7z020 FPGA platform, demonstrating its application to image encryption.
14 June 2022 in IEEE Transactions on Industrial Informatics
The Industrial Internet of Things (IIoT) is the essential component of Industry 4.0. Blockchain is a promising technology for secure data sharing and trustable cooperation between IIoT devices. However, the ever-growing transaction records make it difficult for the storage-limited IIoT devices to join the blockchain network. In this article, an adaptive compression scheme is proposed to decrease the storage volume on each node. In the scheme, the block body is compressed by representing the included transactions as their remainders stored in the distributed nodes. The original transaction could be recovered based on the Chinese remainder theorem. In particular, each node adapts its compression ratio according to its storage resource. The nodes storing more data have advantages in transaction recovery, introducing an incentive mechanism for efficient storage utilization. The theoretical analysis and simulation results show that the proposed scheme can achieve a high compression ratio with good service availability. The proposed scheme dramatically lowers the threshold for IIoT devices to join the blockchain network, which is important for the large-scale application of blockchain in Industry 4.0.
20 April 2018 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
In this brief, a customized and pipelined hardware implementation of the quasi-Newton (QN) method on field-programmable gate array (FPGA) is proposed for fast artificial neural networks onsite training, targeting at the embedded applications. The architecture is scalable to cope with different neural network sizes while it supports batch-mode training. Experimental results demonstrate the superior performance and power efficiency of the proposed implementation over CPU, graphics processing unit, and FPGA QN implementations.
Bundle adjustment (BA) is a fundamental optimization technique used in many crucial applications, including 3D scene reconstruction, robotic localization, camera calibration, autonomous driving, street view map generation, and even space exploration etc. Essentially, BA is a joint non-linear optimization problem, and one which can consume a significant amount of time and power, especially for large optimization problems. Previous approaches of optimizing BA performance heavily rely on parallel processing or distributed computing, which trade higher power consumption for higher performance. In this paper we propose π-BA, the first hardware-software co-designed BA hardware accelerator that exploits custom hardware to simultaneously achieve higher performance and power efficiency. Specifically, based on our key observation that not all 3D points appear on all images in a BA problem, we designed a Co-Observation Optimization technique to accelerate BA operations with optimized usage of memory and computation resources. In addition, we developed a hardware-friendly differentiation method, which combines the analytic and forward automatic differentiation to calculate derivatives of projection function in the BA problem. We have implemented the proposed design on an embedded FPGA SoC, and experimental results confirm that π-BA outperforms the existing software implementations in terms of performance and power consumption.
12 February 2024 in ACM Transactions on Reconfigurable Technology and Systems
Convolutional neural networks (CNNs) have been widely deployed in computer vision tasks. However, the computation and resource intensive characteristics of CNN bring obstacles to its application on embedded systems. This article proposes an efficient inference accelerator on Field Programmable Gate Array (FPGA) for CNNs with depthwise separable convolutions. To improve the accelerator efficiency, we make four contributions: (1) an efficient convolution engine with multiple strategies for exploiting parallelism and a configurable adder tree are designed to support three types of convolution operations; (2) a dedicated architecture combined with input buffers is designed for the bottleneck network structure to reduce data transmission time; (3) a hardware padding scheme to eliminate invalid padding operations is proposed; and (4) a hardware-assisted pruning method is developed to support online tradeoff between model accuracy and power consumption. Experimental results show that for MobileNetV2 the accelerator achieves 10× and 6× energy efficiency improvement over the CPU and GPU implementation, and 302.3 frames per second and 181.8 GOPS performance that is the best among several existing single-engine accelerators on FPGAs. The proposed hardware-assisted pruning method can effectively reduce 59.7% power consumption at the accuracy loss within 5%.