A mixed‐integer linear programming model for methanol production from steelmaking byproduct gases is presented, considering dynamic constraints of process units. Renewable energy is used to produce hydrogen for the process via electrolysis. A case study incorporates dynamic market prices and the CO2 footprint of the electric power consumption, revealing a CO2 saving potential of 18.5 % for the scenarios and configurations studied. The results indicate that upgrading the model to a design optimization in the future will increase savings.
To match the fluctuating renewable energy generation with varying industrial process steam demand, electric heat storage is a viable solution for energy transformation. However, the adoption of this technology by companies hinges on its economic feasibility. Proponents often argue that leveraging spot market electricity prices provides a competitive edge over conventional energy systems without storage. However, additional factors, such as grid fees, levies and taxes can substantially inflate storage charging costs. This study investigates the integration of an electric latent heat storage for process steam within a conventional natural gas boiler system in a paper manufacturing case study under German industrial electricity price regulation to evaluate the effects of electricity prices alongside various operational energy cost factors and rebates through a mixed-integer linear program. Three storage sizes (1 MWh, 100 MWh, 100 GWh) and four electricity procurement configurations (status quo, optimized fixed-price contract, day-ahead only, and a mixed fixed/day-ahead strategy) are analysed. For 100 MWh, the mixed strategy cuts energy costs by about 10% versus day-ahead pricing and around 13.5% versus the status quo contract, lowering the specific electricity price from 6.2 to 5.3 ct/kWh, while emissions range from the slight increases to 23% reductions when grid fees are removed.
Mathematical optimization is a widespread method in order to improve, for instance, the efficiency of energy systems. A simulation approach based on partial differential equations can typically not be formulated as an optimization problem, thus requiring interfacing to an external optimization environment. This is, among others, also true for the programming language Modelica. Because of high computation time, such coupled approaches are often limited to small-scale optimization problems. Since simulation models tend to get more complex, simulation time and, in turn, associated optimization time rise significantly. To enable proper sampling of the search space, individual optimization runs need to be solved in acceptable times. This paper addresses the search for a proper optimization approach and tool to couple with Modelica/Dymola. The optimization is carried out on an exemplary power plant model from the ClaRa-Library using an evolutionary algorithm (SPEA2-based) with Ansys optiSlang. To verify and evaluate the results, a comparison with the standard Dymola optimization library is performed. Both parallelization and indirect optimization with surrogate models achieved a significant runtime reduction by a factor of up to 5.4. The use of meta models is particularly advantageous for repetitive optimization runs of the same optimization problem but may lead to deviations due to the calculated approximations.