Soft robots have proved to represent a new frontier for the development of intelligent machines able to show new capabilities that can complement those currently performed by robots based on rigid materials. One of the main application areas where this shift is promising an impact is minimally invasive surgery. In previous works, the STFF-FLOP soft manipulator has been introduced as a new concept of using soft materials to develop endoscopic tools. In this paper, we present a novel kind of stiffening system based on fiber jamming transition that can be embedded in the manipulator to widen its applicability by increasing its stability and with the possibility to produce and transmit higher forces. The STIFF-FLOP original module has been re-designed in two new versions to incorporate the variable stiffness mechanism. The two designs have been evaluated in terms of dexterity and variable stiffness capability and, despite a general optimization rule did not clearly emerge, the study confirmed that fiber jamming transition can be considered an effective technological approach for obtaining variable stiffness in slender soft structures.

Robots made of soft materials are demonstrating to be well suited in applications where dexterity and intrinsic safety are necessary. However, one of the most challenging goals of soft robotics remains the ability to change the stiffness of body parts to guarantee stability and to produce significant forces. Among soft actuation technologies reported in literature, the jamming phenomenon is now achieving resounding interest. The jamming transition was observed and studied both with granular and laminar material; however, there is a third possibility that is not gaining the attention that probably would deserve: the fiber jamming. The aim of this study was an attempt to analyze the main parameters influencing the fiber jamming transition as promising stiffening solution for soft robotics. A preliminary analysis to choose the most suitable filling material and the external membrane that compose the system was performed and three possible configurations were designed. The prototypes thus assembled were experimentally investigated by using two different setups: one for conducting comparative bending tests on the systems and another for assessing the mechanical properties of single filling fibers. The results of the tests are used to feature the correlation between the arrangement and the material properties of the fibers and the stiffening capability of the fiber jamming systems. The investigation has shown performances comparable with those obtained with granular and layer jamming, demonstrating that fiber jamming is a good candidate for integration in soft robotic devices.

There is a growing concern in the population about the effects that environmental exposure to any source of “uncontrolled” radiation may have on public health. Anxiety arises from the controversial knowledge about the effect of electromagnetic field (EMF) exposure to cells and organisms but most of all concerning the possible causal relation to human diseases. Here we reviewed those in vitro and in vivo and epidemiological works that gave a new insight about the effect of radio frequency (RF) exposure, relating to intracellular molecular pathways that lead to biological and functional outcomes. It appears that a thorough application of standardized protocols is the key to reliable data acquisition and interpretation that could contribute a clearer picture for scientists and lay public. Moreover, specific tuning of experimental and clinical RF exposure might lead to beneficial health effects.

Soft robotics opened a new set of technological challenges in using soft materials to build robots. The ability of change stiffness is among the most important, because it enables the possibility to tune forces exchanged with the environment. Granular and layer jamming transition have already demonstrated to be a promising approach for developing variable stiffness structures, but no studies have been dedicated to specifically fiber jamming so far. In this paper, we report a preliminary comparative study on fiber jamming applied to cylindrical structures. Fibers of different materials have been used as filler and tested under bending conditions. The results show that up to 380% of stiffness increase can be achieved, in line with data collected on similar devices that use granular jamming. The role of the main mechanical and geometrical parameters have been discussed: elastic properties are fundamental, but optimal performance can be achieved only with ordered arrangements of the fibers; geometrical features seem secondary, but surface roughness has an important role in preventing sliding. This is a preliminary study, but it already defines a first set of guidelines that can help and promote future works on the development and integration of the fiber jamming in soft systems.

Over the past decade, there has been growing interest in high-fidelity simulation for medical applications leading to huge research efforts towards physical organ simulators with realistic representations of human organs. As this is a relatively young research field, this review aims to provide an insight into the current state of the art in high-fidelity physical organ simulators that are used for training purposes, as educational tools, for biomechanical studies, and for preclinical device testing. Motivated by a paucity of clear definitions and categorization of various simulators, we describe high-fidelity physical organ simulators in terms of their degree of representation of the anatomy, material properties, and physiological behavior of the target organs in the context of their applications. We highlight the traditional approaches for static organ simulators using synthetic materials, and diverse approaches for dynamic organ simulators including soft robotic, ex vivo, and biohybrid strategies to meet the ever-increasing demand for realistic anthropomorphic organ models. Finally, we discuss challenges and potential future avenues in the field of high-fidelity physical organ simulators.

In recent years, minimally invasive surgery (MIS) has gained wider acceptance among surgeons. MIS requires high skills for the operators, mainly due to its intrinsic technical limitations. Tissue manipulation and retraction remain the most challenging tasks; more specifically liver, stomach, and intestine are the organs mostly involved in retraction tasks for abdominal procedures. The literature reports an increasing interest toward dedicated solutions for abdominal tissue retraction tasks. To overcome the limitations of commercial systems and research prototypes, the aim of this study is the design, the realization, and the validation of a retraction system that is simple, reliable, easy to use, safe, and broadly compatible with MIS. The proposed retractor has two main components: (1) a soft central part with variable stiffness obtained by exploiting the granular jamming phenomenon for assuring, at the same time, safe introduction into the abdominal cavity and stable retraction and (2) two iron cylinders located at the two extremities of the device for anchoring the retractor to the abdominal wall by using the magnetic attraction force between these components and two external permanent magnets. System design has been performed by deeply investigating granular jamming principle and ferromagnetic properties of iron elements. Ex vivo and in vivo assessment has been carried out with the final aim to identify the most appropriate design of each retractor component and to demonstrate the advantages of using a soft system with variable stiffness during a retraction task.