The phase transition temperatures for amorphous metals based on aluminum Al87(Ni,Fe)8(REM)5 system were determined by differential scanning calorimetry (DSC). The mechanisms of formation and growth of nanocrystals in an amorphous matrix were predicted using kinetic models (Matusita model). It was found that after annealing at the temperature of stable nanocrystalline growth, an X-ray amorphous structure with a volume fraction of disordered nanocrystalline phases of solid state of Al(X), GdFe2, AlFe2Ni, GdFe2 for the amorphous metal alloy (AMA) Al87Y4Gd1Ni4Fe4 alloy and microcrystalline phases of solid state of Al(X), GdFe2 AlFe2Ni for the Al87Gd5Ni4Fe4 alloy are formed, which significantly affects the mechanical properties of the Al87(Ni,Fe)8(REM)5 system. The effect of annealing on the mechanical properties of amorphous aluminum-based alloys was investigated using Oliver-Pharr and Young's modulus methods it was found that thermal modification of AMAs: Al87Gd5Ni4Fe4 as a result of heat treatment of AMAs from 5 to 15 min., the microhardness increases from 0.20 GPa to 2.75 GPa, and when heat treated for 60 min at a temperatures of T3 = 645±5 K, 647±5 K, it decreases to 0.35 GPa and 0.45 GPa, respectively. Методом диференціальної скануючої калориметрії (ДСК) визначено температури фазових переходів аморфних металів на основі алюмінію Al87(Ni,Fe)8(REM)5. За допомогою кінетичних моделей (модель Матусіта) передбачено механізми утворення та росту нанокристалів в аморфній матриці. Встановлено, що після відпалу при температурі стабільного росту нанокристалів утворюється рентгенаморфна структура з об’ємною часткою невпорядкованих нанокристалічних фаз твердого стану Al(X), GdFe2, AlFe2Ni, GdFe2 для аморфного металевого сплаву (АМС). Утворюється сплав Al87Y4Gd1Ni4Fe4 та мікрокристалічні фази твердого стану Al(X), GdFe2 AlFe2Ni для сплаву Al87Gd5Ni4Fe4, що істотно впливає на механічні властивості системи Al87(Ni,Fe)8(REM)5. Досліджено вплив відпалу на механічні властивості аморфних сплавів на основі алюмінію за допомогою методів модуля Олівера-Фарра та Юнга. Встановлено, що термічна модифікація АМС: Al87Gd5Ni4Fe4 в результаті термообробки АМС від 5 до 15 хв, мікротвердість зростає від 0,20 до 2,75 ГПа, а при термічній обробці протягом 60 хв за температур Т3 = 645±5 , 647±5 К зменшується до 0,35 і 0,45 ГПа, відповідно.