We present a Kerr-lens-modelocked, three-element, diode-pumped Ti:sapphire laser producing 111-fs pulses at a repetition frequency of 1.02 GHz. Self-starting soliton-modelocked operation with an output power of 106 mW was obtained when the laser was pumped at 1.0 W with a single 527-nm laser diode. The output exhibits a relative intensity noise of 0.06% (1 Hz – 1 MHz) and locking of the repetition rate to an external reference is demonstrated with a phase error of 1.7 mrad (1 Hz–1 MHz). The simplicity of the laser makes it an attractive candidate as a module for integration into larger systems.
High-resolution multi-species spectroscopy is achieved by delivering broadband 3–4-μm mid-infrared light through a 4.5-meter-long silica-based hollow-core optical fiber. Absorptions from H37Cl, H35Cl, H2O and CH4 present in the gas within the fiber core are observed, and the corresponding gas concentrations are obtained to 5-ppb precision using a high-resolution Fourier-transform spectrometer and a full-spectrum multi-species fitting algorithm. We show that by fully fitting the narrow absorption features of these light molecules their contributions can be nulled, enabling further spectroscopy of C3H6O and C3H8O contained in a Herriott cell after the fiber. As a demonstration of the potential to extend fiber-delivered broadband mid-infrared spectroscopy to significant distances, we present a high-resolution characterization of the transmission of a 63-meter length of hollow-core fiber, fully fitting the input and output spectra to obtain the intra-fiber gas concentrations. We show that, despite the fiber not having been purged, useful spectroscopic windows are still preserved which have the potential to enable hydrocarbon spectroscopy at the distal end of fibers with lengths of tens or even hundreds of meters.
Diode-pumping of Ti:sapphire provides a low-cost route to high-quality frequency-comb sources, exploiting the potential of direct diode modulation for wideband control of the carrier-envelope-offset frequency. We present here an - and -locked, directly diode-pumped Ti:sapphire frequency comb, producing 66-fs pulses at 800 nm and employing -to- interferometry and current modulation of a 462-nm blue laser diode to achieve a stabilization bandwidth extending to . Characterizations of the and phase noise are compared to relative intensity noise spectra of the pump diodes to provide insights into how the diode design and performance transfer into the comb stability, suggesting a lower contribution to and noise from the blue laser diode than from the green diode.
Using coherent broadband mid-infrared light from a picosecond optical parametric oscillator we introduce a flexible, easy to use, high-resolution technique which can be utilized to conduct remote stand-off, or fiber delivered, multi-species spectroscopy in a spectroscopically cluttered environment. In particular, both narrow line-like and broad continuum-like species can be handled simultaneously. If only species with narrow line-like absorptions are present, this can be done without the need for an explicit reference spectrum. We demonstrate the approach by performing absorption spectroscopy of H2O, CH4, CH3OH and C2H7NO (MEA) at high optical resolution (≈0.033 cm−1) and via fiber delivery, opening the possibility of conducting multi-species spectroscopy in remote and hazardous environments. Spectral co-fitting of all absorption features and of the spectrum of the light-source provides a robust means of determining species concentrations, with detection limits of 290 ppb and 890 ppb obtained for CH4 and MEA respectively using a 10.5-m Herriott cell and 32 seconds measurement time.
In this work we present an Autocorrelation z-scan technique to measure, simultaneously, the spatial and temporal distribution of femtosecond pulses near the focal region of lenses. A second-order collinear autocorrelator is implemented before the lens under test to estimate the pulse width. Signals are obtained by translating a Two Photon Absorption (TPA) sensor along the optical axis and by measuring the second-order autocorrelation trace at each position z. The DC signal, which is typically not considered important, is taken into account since we have found that this signal provides relevant information. Experimental results are presented for different lenses and input wavefronts.
In this work, we present a commercial CMOS (Complementary Metal Oxide Semiconductor) Raspberry Pi camera implemented as a Near-Infrared detector for both spatial and temporal characterization of femtosecond pulses delivered from a femtosecond Erbium Doped Fiber laser (fs-EDFL) @ 1.55 µm, based on the Two Photon Absorption (TPA) process. The capacity of the device was assessed by measuring the spatial beam profile of the fs-EDFL and comparing the experimental results with the theoretical Fresnel diffraction pattern. We also demonstrate the potential of the CMOS Raspberry Pi camera as a wavefront sensor through its a nonlinear response in a Shack-Hartmann array and for the temporal characterization of the femtosecond pulses delivered from the fs-EDFL through TPA Intensity autocorrelation measurements. The direct pulse detection and measurement, through the nonlinear response with a CMOS, is proposed as a novel and affordable high-resolution and high-sensitivity alternative to costly detectors such as CCDs, wavefront sensors and beam profilers @ 1.55 µm. The measured fluence threshold, down to 17.5 µJ/cm2, and pJ/pulse energy response represents the lowest reported values applied as a beam profiler and a TPA Shack-Hartmann wavefront sensor, to our knowledge.