S M Rakibul Islam

Mr. S M Rakibul Islam

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 September 2018 in Photonics
Verified
Journal Article
Open access
PDF file
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
MIMd Rubayet Islam
Md Rubayet Islam
MMMohammad Mahmudul Alam Mia
Mohammad Mahmudul Alam Mia
SSSummit Sayem
Summit Sayem
Feroz AhmedFeroz Ahmed
Feroz Ahmed
This paper proposes a hexagonal photonic crystal fiber (H-PCF) structure with all circular air holes in order to simultaneously achieve ultrahigh birefringence and high nonlinearity. The H-PCF design consists of an asymmetric core region, where one air hole is a reduced diameter and the air hole in its opposite vertex is omitted. The light-guiding properties of the proposed H-PCF structure were studied using the full-vector finite element method (FEM) with a circular perfectly matched layer (PML). The simulation results showed that the proposed H-PCF exhibits an ultrahigh birefringence of 3.87 × 10−2, a negative dispersion coefficient of −753.2 ps/(nm km), and a nonlinear coefficient of 96.51 W−1 km−1 at an excitation wavelength of 1550 nm. The major advantage of our H-PCF design is that it provides these desirable modal properties without using any non-circular air holes in the core and cladding region, thus making the fiber fabrication process much easier. The ultrahigh birefringence, large negative dispersion, and high nonlinearity of our designed H-PCF make it a very suitable candidate for optical backpropagation applications, which is a scheme for the simultaneous dispersion and nonlinearity compensation of optical-fiber transmission links.

22 May 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
MIMd Rubayet Islam
Md Rubayet Islam
Priasa AktherPriasa Akther
Priasa Akther
AMABDULLAH AL MAIMUN
ABDULLAH AL MAIMUN
Reliable monitoring of power system equipment is essential for ensuring operational stability, minimizing unexpected outages, and improving grid reliability. Among various condition monitoring techniques, optical sensing technologies have attracted significant attention due to their high sensitivity, electromagnetic interference immunity, and suitability for harsh electrical environments. This paper presents the design and application of a photonic crystal fiber (PCF)-based sensing system for real-time monitoring in power systems, with particular emphasis on dissolved gas detection in oil-immersed transformers. The proposed sensing approach employs hollow-core photonic crystal fiber (HC-PCF) as an optical absorption chamber, enabling enhanced light–gas interaction while maintaining a compact and flexible sensor configuration. Based on infrared absorption spectroscopy and Beer–Lambert theory, the system is designed to achieve high-sensitivity detection of characteristic fault gases generated during transformer insulation degradation. The diffusion characteristics of gases inside the HC-PCF are theoretically analyzed and experimentally verified to evaluate sensor response performance. Experimental investigations demonstrate that the proposed PCF-based sensing system provides excellent linearity, strong selectivity, and improved detection sensitivity for low-concentration acetylene monitoring. Allan variance analysis indicates that the optimal signal-to-noise ratio is achieved with a 29 s averaging time, resulting in a minimum detection limit of 4.5 ppm. Furthermore, the compact structure and extended optical interaction length offered by the HC-PCF significantly improve the practicality of online transformer condition monitoring. The results confirm that photonic crystal fiber-based sensing technology offers a promising solution for next-generation real-time power system monitoring applications. Owing to its high sensitivity, compactness, and capability for continuous online operation, the proposed system demonstrates strong potential for deployment in intelligent grid monitoring and predictive maintenance of high-voltage electrical equipment.

17 March 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Md MahmudMd Mahmud
Md Mahmud
MIMd Al Imran
Md Al Imran
AQAbdul Qader
Abdul Qader
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
Low-voltage distribution networks (LVDNs) serve as the final delivery layer of the electricity system, directly influencing reliability, public safety, customer service quality, and the integration of distributed energy resources. Despite their importance, LVDNs have historically received less monitoring than transmission and medium-voltage systems due to their scale, cost, and deployment complexity. Non-contact magnetic sensing has emerged as a promising alternative to invasive measurement methods for these networks. Among magnetic sensor types, giant magnetoresistive (GMR) devices are appealing because they offer high sensitivity, compactness, low power consumption, and compatibility with embedded electronics. This review assesses the current state of GMR-based monitoring for overhead and low-voltage applications, focusing on non-contact current measurement, fault detection, and fault classification. It first examines the operating characteristics of LVDNs and the unique challenge of detecting low- and high-impedance faults. Next, it outlines the physical principles behind GMR sensing, compares GMR with Hall, AMR, TMR, current transformer, and Rogowski-coil technologies, and discusses the use of multi-axis sensor heads to address cross-coupled magnetic fields in three-phase setups. Special focus is given to calibration, alignment, temperature effects, electromagnetic interference, packaging, wireless deployment, and data-driven classification. The review concludes that GMR sensors are well-suited for scalable, non-contact monitoring, but widespread adoption in the field will require better low-voltage fault datasets, standardized calibration procedures, long-term environmental testing, and closer integration with digital-twin and smart-meter infrastructures.

10 June 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Md MahmudMd Mahmud
Md Mahmud
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
SMS. M. A. Motakabber
S. M. A. Motakabber
Brushless DC (BLDC) motors are now the dominant propulsion choice for electric vehicles (EVs) because of their high torque density, efficiency and reliability, but their nonlinear dynamics, electronic commutation and wide load and speed range make fixed-gain control difficult. A single set of proportional–integral–derivative (PID) gains tuned at one operating point degrades when inertia, back-EMF or load torque change. This paper presents a hybrid adaptive PID speed controller for a BLDC EV drive that couples an online PID auto-tuner, which re-estimates the gains from a frequency-response estimate of the plant, with a fast fixed-structure PID that supplies the rapid corrective action the auto-tuner cannot provide during its estimation interval. The novelty of the work is this explicit two-element decomposition operating on a cascaded speed/voltage loop driven by Hall-sensor feedback, which removes the need for an exact analytical feedback model while retaining the transparency of classical PID. A full analytical model of the BLDC machine and the closed-loop transfer functions is derived and implemented in MATLAB/Simulink. Across step references of 1000–1800 rpm and load steps to 10 N·m, and against a conventional fixed-gain PID and a Flower Pollination Algorithm (FPA) tuned PID, the proposed controller holds overshoot below 1% at low-to-mid speed and consistently lower torque ripple, while a 12.4% transient undershoot at 1800 rpm under sudden load identifies the present operating limit and a direction for future work.

12 August 2026 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
Md MahmudMd Mahmud
Md Mahmud
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
SMS. M. A. Motakabber
S. M. A. Motakabber
Brushless DC (BLDC) motors are now the dominant propulsion choice for electric vehicles (EVs) because of their high torque density, efficiency and reliability, but their nonlinear dynamics, electronic commutation, and wide load and speed range make fixed-gain control difficult. A single set of proportional–integral–derivative (PID) gains tuned at one operating point degrades when inertia, back-EMF, or load torque change. This paper presents a hybrid adaptive PID speed controller for a BLDC EV drive that couples an online PID auto-tuner that re-estimates the gains from a frequency response estimate of the plant, with a fast fixed-structure PID that supplies the rapid corrective action that the auto-tuner cannot provide during its estimation interval. The novelty of this work is this explicit two-element decomposition operating on a cascaded speed/voltage loop driven by Hall sensor feedback, which removes the need for an exact analytical feedback model while retaining the transparency of classical PID. A full analytical model of the BLDC machine and the closed-loop transfer functions is derived and implemented in MATLAB/Simulink. Across step references of 1000–1800 rpm and load steps to 10 N·m, and against a conventional fixed-gain PID and a Flower Pollination Algorithm (FPA)-tuned PID, the proposed controller holds overshoot below 1% at low-to-mid speed and a consistently lower torque ripple, while a 12.4% transient undershoot at 1800 rpm under sudden load identifies the present operating limit and a direction for future work.

8 January 2026 in Global Digital Culture & Communication
Verified
Journal Article
Open access
PDF file
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
This study examines the impact of large language models (LLMs) on news reception and agenda setting. Using a sequential mixed-methods design, three phases were implemented: LLM-assisted content analysis of 12,847journalistic pieces (2024–2026), focus groups with 94 participants and in depth interviews with 32 users, and social network analysis of 45,672 posts. The results reveal that LLMs act as new algorithmic gatekeepers, concentrating coverage on technology and entertainment, and acquiring a degree of intermediation (0.342) higher than that of traditional media. Users develop lay theories characterized by ambivalence between perceived efficiency and distrust of algorithmic selection criteria. The Bayesian regression model identifies engagement as the strongest predictor of change in the thematic agenda (β = 0.412). It is concluded that LLMs have structurally transformed gatekeeping and agenda-setting processes, requiring an update of classical communication theories to incorporate algorithmic mediation.