世伟 王

Mr. 世伟 王


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2026 in Minerals
Verified
Journal Article
Open access
PDF file
HLHongqiang Liu
Hongqiang Liu
VMVaso Manojlović
Vaso Manojlović
世王世伟 王
世伟 王
HJHeng Ji
Heng Ji
LRLI Renguo
LI Renguo
MGMinglei Gao
Minglei Gao
Vanadium–titanium magnetite is a strategically important resource for iron, vanadium, and titanium production, yet its utilization in conventional blast furnace–basic oxygen furnace routes is limited by the dilution of titanium into low-value slag. This study investigates an integrated process route combining pellet preparation, hydrogen-based shaft furnace reduction conducted in the temperature range of 800–1000 °C, and subsequent electric furnace smelting for efficient recovery of Fe, V, and Ti. Pellets prepared from 100 wt.% vanadium–titanium magnetite exhibited sufficient mechanical strength but showed poor reducibility and severe low-temperature reduction disintegration, rendering them unsuitable for hydrogen-based shaft furnace operation. To overcome these limitations, systematic ore blending was applied. An optimized pellet composition comprising 40 wt.% vanadium–titanium magnetite, 50 wt.% high-grade iron ore, and 10 wt.% titanium concentrate achieved reduction degrees above 90%, acceptable swelling and bonding behavior, and low reduction disintegration indices meeting industrial HYL requirements. Industrial trials in a hydrogen-based shaft furnace demonstrated stable operation and consistent product quality, producing direct reduced iron with controlled metallization and enrichment of titanium and vanadium. Subsequent electric furnace smelting achieved clear slag–metal separation, yielding hot metal with high iron and vanadium recovery and a TiO2-rich slag containing approximately 45 wt.% TiO2. Recovery rates of Fe, V, and Ti exceeded 90%, confirming the technical feasibility of the proposed process route.

1 January 2025
Verified
Conference Paper
Open access
PDF file
RLRenguo Li
Renguo Li
LLLanjie Li
Lanjie Li
HJHeng Ji
Heng Ji
MGMinglei Gao
Minglei Gao
世王世伟 王
世伟 王
Sea sand ore (SSO), an abundant secondary vanadium-titanium magnetite resource formed through fluvial, wave, and current erosional processes, is readily minable yet remains underutilized due to challenges in metallurgical processing caused by its complex mineral composition. This study utilizes SSO as raw material to produce oxidized pellets, thus enabling its application in blast furnace(BF) ironmaking processes and promoting comprehensive utilization of sea SSO resources. This study systematically investigated the effects of SSO blending ratios on the metallurgical properties of vanadium-titanium magnetite oxidized pellets. Results demonstrate that compared with Heishan vanadium-titanium ores, SSO exhibits superior pelletization performance despite slightly higher V-Ti content. As the SSO ratio increased, the strength of green pellets progressively declined, with the 100% SSO pellets showing zero drop strength - failing to meet production requirements. Furthermore, the compressive strength(CP) and low-temperature reduction degradation index (RDI +3.15) of oxidized pellets initially decreased then increased with rising SSO ratios. Industrial basket trials using 80% SSO confirmed pellet strength reaching 2,578 N, satisfying BF operational criteria.