Hongqiang Liu

Dr. Hongqiang Liu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2021 in Metals
Verified
Journal Article
Open access
PDF file
HLHongqiang Liu
Hongqiang Liu
ZCZhicheng Cheng
Zhicheng Cheng
WYWei Yu
Wei Yu
GWGaotian Wang
Gaotian Wang
JZJie Zhou
Jie Zhou
QCQingwu Cai
Qingwu Cai
High-temperature reduction pretreatment (HTRP) is a process that can significantly improve the core quality of a billet. The existing flow stress data cannot meet the needs of simulation due to lack of high temperature data. To obtain the hot forming process parameters for the high-temperature reduction pretreatment process of 42CrMo steel, a hot compression experiment of 42CrMo steel was conducted on Gleeble-3500 thermal-mechanical at 1200–1350 °C with the rates of deformation 0.001–10 s−1 and the deformation of 60%, and its deformation behavior at elevated temperature was studied. In this study, the effects of flow stress temperature and strain rate on austenite grain were investigated. Moreover, two typical constitutive models were employed to describe the flow stress, namely the Arrhenius constitutive model of strain compensation and back propagation artificial neural network (BP ANN) model. The performance evaluation shows that BP ANN model has high accuracy and stability to predict the curve. The thermal processing maps under strains of 0.1, 0.2, 0.3, and 0.4 were established. Based on the analysis of the thermal processing map, the optimal high reduction process parameter range of 42CrMo is obtained: the temperature range is 1250–1350 °C, and the strain rate range is 0.01–1 s−1.

25 February 2022 in Metals
Verified
Journal Article
Open access
PDF file
NZNing Zhen
Ning Zhen
XLXue Li
Xue Li
HLHongqiang Liu
Hongqiang Liu
QCQingwu Cai
Qingwu Cai
WYWei Yu
Wei Yu
In addition to eliminating voids in a billet, the reduction pretreatment (RP) process can refine the austenite structure after reheating and can deform the residual voids, which affect the void healing behavior during insulation before rolling, and then can affect the final quality of the steel plate. In this study, the effect of the RP process on the evolution of voids in billets and steel plates was investigated by experimental and numerical simulation. RP and non-RP billets were reheated and rolled into 60 mm-thick steel plates, respectively, and the evolutionary behavior of voids within the plates was analyzed using ultrasonic flaw detection methods. Finite element method (FEM) and phase-field method (PFM) were used to investigate the mechanism behind improving the quality of steel plates under the RP process. The simulation results show that, in addition to directly closing the voids through plastic deformation, the RP process can promote the diffusive healing behavior during insulation before rolling by refining the reheated austenite organization and by increasing the curvature of the void surface. Due to the reduction in voids inside the steel plate, the impact energy of the RP steel plate is higher.

6 February 2026 in Minerals
Verified
Journal Article
Open access
PDF file
HLHongqiang Liu
Hongqiang Liu
VMVaso Manojlović
Vaso Manojlović
世王世伟 王
世伟 王
HJHeng Ji
Heng Ji
LRLI Renguo
LI Renguo
MGMinglei Gao
Minglei Gao
Vanadium–titanium magnetite is a strategically important resource for iron, vanadium, and titanium production, yet its utilization in conventional blast furnace–basic oxygen furnace routes is limited by the dilution of titanium into low-value slag. This study investigates an integrated process route combining pellet preparation, hydrogen-based shaft furnace reduction conducted in the temperature range of 800–1000 °C, and subsequent electric furnace smelting for efficient recovery of Fe, V, and Ti. Pellets prepared from 100 wt.% vanadium–titanium magnetite exhibited sufficient mechanical strength but showed poor reducibility and severe low-temperature reduction disintegration, rendering them unsuitable for hydrogen-based shaft furnace operation. To overcome these limitations, systematic ore blending was applied. An optimized pellet composition comprising 40 wt.% vanadium–titanium magnetite, 50 wt.% high-grade iron ore, and 10 wt.% titanium concentrate achieved reduction degrees above 90%, acceptable swelling and bonding behavior, and low reduction disintegration indices meeting industrial HYL requirements. Industrial trials in a hydrogen-based shaft furnace demonstrated stable operation and consistent product quality, producing direct reduced iron with controlled metallization and enrichment of titanium and vanadium. Subsequent electric furnace smelting achieved clear slag–metal separation, yielding hot metal with high iron and vanadium recovery and a TiO2-rich slag containing approximately 45 wt.% TiO2. Recovery rates of Fe, V, and Ti exceeded 90%, confirming the technical feasibility of the proposed process route.

1 January 2025
Verified
Conference Paper
Open access
PDF file
BCBuXing Chen
BuXing Chen
Mao ChenMao Chen
Mao Chen
MHmeilong Hu
meilong Hu
KMKaihui Ma
Kaihui Ma
HLHongqiang Liu
Hongqiang Liu
CBChenguang Bai
Chenguang Bai
China is actively promoting its carbon peaking and carbon neutrality goals. Hydrogen metallurgy characterized by the replacement of carbon with hydrogen has attracted widespread attention as a vital component of low-carbon metallurgy. This study provides a statistical analysis of publications and patents related to hydrogen metallurgy in Chinese databases over the past five years, and summarizes the current industrial practices in hydrogen metallurgy in China. The results reveal a rapidly growing trend in theoretical research and technological development related to hydrogen metallurgy in China over recent years. Several major steel enterprises have carried out industrial practices of hydrogen-based shaft furnace and hydrogen-rich blast furnace smelting, offering initial confirmation of the feasibility of hydrogen metallurgy. Currently, the industrialization of hydrogen metallurgy in China faces a challenge of high hydrogen production costs. Therefore, this study reviews and analyzes the economics of the main hydrogen sources, including coke oven gas, natural gas, coal gasification, hydrogen from by-product during chemical processes, and hydrogen produced by water electrolysis. Although the current hydrogen sources mainly rely on gray hydrogen produced from fossil fuels, the large-scale and cost-effective production of green hydrogen from renewable energy sources in the future is expected to substantially accelerate the industrial application of hydrogen metallurgy. In summary, hydrogen metallurgy technology in China has established a solid foundation in research and accumulated certain industrial application experience. However, further research is required to improve hydrogen utilization efficiency and decrease hydrogen production costs, thereby enabling the widespread industrial application of hydrogen metallurgy.

1 January 2025
Verified
Conference Paper
Open access
PDF file
XHXing Han
Xing Han
HLHongqiang Liu
Hongqiang Liu
LLLanjie Li
Lanjie Li
PLPengyang Li
Pengyang Li
XGXiaolong Guo
Xiaolong Guo
This study provides a systematic review of current hydrogen-based metallurgical processes, analyzing their technical pathways across multiple dimensions including raw material preparation, reaction mechanisms, critical equipment design, and system integration. A comparative evaluation reveals the distinct advantages and limitations of each technological route. The paper highlights HBIS Group's pioneering HyMEX demonstration project - the world's first industrial-scale application of coke oven gas direct reduction without reforming. This breakthrough technology eliminates the conventional dependence on natural gas for reducing gas production and achieves the highest hydrogen utilization rate among operational shaft furnace processes. The successful implementation establishes a new benchmark for hydrogen metallurgy industrialization. Furthermore, this analysis examines China's unique position for hydrogen metallurgy development, considering both policy frameworks and resource characteristics. With abundant coke oven gas resources and dominant steel production capacity, China possesses distinctive advantages for scaling hydrogen-based ironmaking. The study concludes that as hydrogen infrastructure matures and production costs decline, shaft furnace hydrogen metallurgy will likely become a cornerstone technology for the industry's low-carbon transformation, providing critical technical support for national climate commitments.

15 October 2026 in ISIJ International
Verified
Journal Article
Open access
PDF file
TRTKoral335Karlo Raic
TKoral335Karlo Raic
VMVaso Manojlović
Vaso Manojlović
HLHongqiang Liu
Hongqiang Liu
XHXing Han
Xing Han
This paper presents a mathematical analysis of diffusion and interfacial reaction in a single slit pore of an iron ore pellet under H2/CO atmospheres. The slit pore is used as a simplified microstructural model to examine how local pore geometry influences mass transfer and reaction conditions during reduction. Three slit-pore cross-sectional shapes are considered: triangular, parabolic concave, and parabolic convex. The results show that slit-pore geometry affects local mass transfer efficiency and changes the relative influence of diffusion and chemical reaction. The analysis also indicates that narrow and deep slit pores are more sensitive to diffusion limitations, particularly in hydrogen-rich atmospheres, which may contribute to the development of crack-like features during reduction. Model trends were consistent with published experimental and calculated observations.