LI Renguo

Mr. LI Renguo


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2026 in Minerals
Verified
Journal Article
Open access
PDF file
HLHongqiang Liu
Hongqiang Liu
VMVaso Manojlović
Vaso Manojlović
世王世伟 王
世伟 王
HJHeng Ji
Heng Ji
LRLI Renguo
LI Renguo
MGMinglei Gao
Minglei Gao
Vanadium–titanium magnetite is a strategically important resource for iron, vanadium, and titanium production, yet its utilization in conventional blast furnace–basic oxygen furnace routes is limited by the dilution of titanium into low-value slag. This study investigates an integrated process route combining pellet preparation, hydrogen-based shaft furnace reduction conducted in the temperature range of 800–1000 °C, and subsequent electric furnace smelting for efficient recovery of Fe, V, and Ti. Pellets prepared from 100 wt.% vanadium–titanium magnetite exhibited sufficient mechanical strength but showed poor reducibility and severe low-temperature reduction disintegration, rendering them unsuitable for hydrogen-based shaft furnace operation. To overcome these limitations, systematic ore blending was applied. An optimized pellet composition comprising 40 wt.% vanadium–titanium magnetite, 50 wt.% high-grade iron ore, and 10 wt.% titanium concentrate achieved reduction degrees above 90%, acceptable swelling and bonding behavior, and low reduction disintegration indices meeting industrial HYL requirements. Industrial trials in a hydrogen-based shaft furnace demonstrated stable operation and consistent product quality, producing direct reduced iron with controlled metallization and enrichment of titanium and vanadium. Subsequent electric furnace smelting achieved clear slag–metal separation, yielding hot metal with high iron and vanadium recovery and a TiO2-rich slag containing approximately 45 wt.% TiO2. Recovery rates of Fe, V, and Ti exceeded 90%, confirming the technical feasibility of the proposed process route.

10 March 2026 in Metals
Verified
Journal Article
Open access
PDF file
MGMinglei Gao
Minglei Gao
XXXiangci Xue
Xiangci Xue
DZDeqing Zhu
Deqing Zhu
LLLanjie Li
Lanjie Li
HJHeng Ji
Heng Ji
ZWZhonghua Wang
Zhonghua Wang
The growing demand for direct reduced iron (DRI) in green steel production requires high-quality fired pellets as the burden for the gas-based shaft furnace direct reduction process. However, the properties of magnetite concentrate as pellet feed present a significant impact on the quality of fired pellets, especially the metallurgical performance. A systematic study of the effect of pretreating the magnetite concentrate on the properties of fired pellets was conducted using two pretreatment technologies, i.e., damp-milling and high-pressure roll grinding (HPRG). Green balls were made from pretreated magnetite concentrates and fired under optimal conditions. Their performance was then evaluated in a laboratory-scale setup simulating the HYL shaft furnace environment. Key metrics included cold compressive strength (CCS), reducibility index (RI), reduction swelling index (RSI), and dynamic low-temperature reduction degradation (LTD). The pretreatment of magnetite concentrates with HPRG twice showed significant benefits. The fired pellets not only have a CCS of 2500 N/p at a roasting temperature 150 °C lower, but also achieve an RI of 3.37 and an RSI of 3.15%, respectively. Furthermore, the reduction degradation tendency was markedly reduced; the +6.3 mm fraction reached 94.72% with a whole pellet ratio of 75.49%. Conversely, while damp-milling improved the LTD, it required a 100 °C increase in preheating temperature and yielded a whole pellet ratio of only 49.15%, failing to meet industrial requirements. The improvement in metallurgical performance is attributed to the intense micro-cracking induced by the two-pass HPRG process, which optimizes the particle size distribution, specific surface areas and improves the microstructure and pore properties of the fired pellets.

2 April 2026 in Metals
Verified
Journal Article
Open access
PDF file
MGMinglei Gao
Minglei Gao
XXXiangci Xue
Xiangci Xue
DZDeqing Zhu
Deqing Zhu
LLLanjie Li
Lanjie Li
HJHeng Ji
Heng Ji
ZWZhonghua Wang
Zhonghua Wang
The advancement of green and low-carbon transition in the steel industry has increased the demand for high-quality direct reduced iron (DRI) as a premium feedstock for electric arc furnace steelmaking. This imposes stricter quality requirements for fired pellets utilized in gas-based shaft furnace processes. To address the poor low-temperature reduction degradation (LTD) of fired pellets produced from a single high-grade magnetite concentrate during gas-based direct reduction. This study investigates the effects of blending hematite concentrates into a magnetite concentrate base (with additions of 0, 20 wt.%, 30 wt.%, and 40 wt.%) on the characteristics of the mixed concentrates, green ball properties, firing performance, and the metallurgical performance of the resulting fired pellets under conditions simulating an HYL shaft furnace. The results indicate that the incorporation of hematite concentrate optimizes the overall particle size distribution and green ball properties. As the hematite proportion increases, the optimal preheating temperature for green balls rises, while the required roasting temperature decreases. The most significant reduction in roasting temperature, from 1225 °C to 1175 °C, is achieved with a 20 wt.% hematite addition. Regarding metallurgical properties, the addition of hematite has a minor effect on the reducibility index (RI) but substantially improves the reduction swelling index (RSI). A notable decrease in the RSI is observed at addition levels of 30% and above. Critically, the LTD is significantly enhanced. The optimal improvement is attained with a 20 wt.% hematite blend, resulting in a- LTD+6.3 mm fraction of 97.48 wt.%, a- LTD−3.2 mm fraction of only 2.18 wt.%, and a whole pellet ratio of 88.01% after reduction. Considering the comprehensive performance, a blend of hematite concentrate between 20 wt.% and 30 wt.% yields fired pellets with superior characteristics, meeting the production requirements for gas-based shaft furnace direct reduction processes. This study provides an effective technological pathway for producing high-performance DRI-grade pellets from high-grade magnetite concentrates, contributing to the green and low-carbon transformation of the iron and steel industry.