Üretildiği malzemenin dayanım, biyolojik ve yorulma gibi özelliklerini kullanım alanına uygun olarak şartlandırabilen gözenekli yapılara ortopedi alanında özellikle onarıcı biyomedikal ürün üretimi için gereksinim duyulmaya başlanmıştır. Dolu malzemelerin kemik ile dayanım farkının fazla olması sonucu ortaya çıkan gerilme kalkanı etkisi biyomedikal ürün kaybına sebep olmaktadır. Eklemeli imalat yöntemlerinin sağladığı avantaj sayesinde gözenekli malzemeler koşullara uygun olarak tasarlanabilmekte veya doğal yapıya sahip geometrilerin kopyalanması ile üretim yapılabilmektedir. Literatürün genelinde yer alan tasarlanabilir birim hücre geometrilerinin üretilebilirliği ve dayanımı hakkındaki çalışmaların aksine yapılan çalışmada koyuna ait femur ve vertebra bölgelerinden alınan trabeküler kemiklerin Mikro-CT ile kopyalanması sonucu elde edilen geometriler Ti6Al4V ELI alaşımından seçimli lazer ergitme (SLE) metodu ile üretilmiştir. Yapılan üretimlerin basma ve basma-kayma dayanımları incelenmiştir. Destek yapılar kullanılmadan yapılan üretim sonrası karşılaşılabilecek üretim değişimleri göz önünde bulundurularak trabeküler yapının üretiminde 1:1, 1:1,10 ve 1:1,20 ölçekli geometriler kullanılmıştır. Yapılan basma testleri sonucunda elastisite modül femur numunelerinde ortalama 3±0,25 GPa ve vertebra numunelerinde 2±0,15 GPa olarak elde edilmiş olup analizlerin deney sonuçları ile uyumluluğunun yüksek olduğu görülmüştür. Çalışma kapsamında üretilen trabeküler metal yapının biyomedikal ürünlerde kullanılması durumunda sahip olduğu düşük elastisite modül değerleriyle gerilme kalkanı etkisini azaltacağı ve doğal kemik geometrisi avantajı ile kemiğin içe doğru büyüme davranışını destekleyeceği sonucuna varılmıştır.
1 March 2020 in International Journal on Interactive Design and Manufacturing (IJIDeM)
Powder-bed arc additive manufacturing (PBAAM) may reduce the cost of powder-bed metal additive manufacturing and enable thicker layers than laser powder bed fusion (LPBF), but melt-track stability limits are not well established. Here, 316L stainless steel powder (15–53 µm) was melted by a TIG-based arc in a custom powder-bed system while varying current, travel speed, layer thickness and hatch distance. Single tracks on an inclined bed (≈0–0.4 mm thickness) were used to identify continuity loss and melt-pool width, quantified from top-view images via width profiles, a gap-based continuity metric and the coefficient of variation. Parallel-track tests at 0.15, 0.20 and 0.25 mm layer thickness with hatch distances set to 25%, 50% and 75% of the measured melt-pool width assessed inter-track bonding and lack of fusion, and selected parameters were validated in five-layer builds. Higher current with low-to-moderate travel speeds produced wider, more stable melt pools on the inclined bed. Hatch ratios of 25–50% were the most effective for sustaining fusion in single layers and multi-layer builds, whereas 75% promoted unbonded regions and narrow-track morphologies. Overall, PBAAM can process substantially thicker layers with relatively simple equipment, but requires a narrow, carefully tuned window to balance continuity, fusion and heat accumulation.
Arc-driven powder bed fusion represents a low-cost alternative to beam-based powder bed systems, yet the morphological stability regimes governing single-track formation and the relative influence of process parameters on regime transitions have not been systematically characterised. Manual visual assessment of track morphology is inherently subjective and cannot objectively quantify the parameter hierarchy governing stability boundaries. This study addresses both limitations through two complementary contributions. A deterministic two-stage image-based framework is developed to automatically classify single-track morphology from top-view images of solidified 316L stainless steel tracks, replacing subjective assessment with a reproducible, intervention-free procedure. A gap-based continuity criterion distinguishes discontinuous from continuous melt paths; for continuous tracks, the coefficient of variation in width (CV (coefficient of variation) < 0.15) further separates geometrically stable from transitional morphologies. Building on the image-derived regime labels, two interpretable classifiers—a depth-limited Decision Tree (DT) and a regularised Logistic Regression (LR)—are fitted using applied current, scanning speed, and electrode-to-powder-bed distance as predictors. The classifiers are employed not for predictive generalisation but to extract standardised coefficients and permutation-based feature importance rankings, yielding a model-agnostic, quantitative explanation of which process parameters govern regime transitions. Stable continuous tracks are obtained only within a restricted parameter window. Permutation importance consistently ranks applied current as the dominant predictor, followed by electrode distance and scanning speed, in agreement with the thermophysical interpretation. Logistic Regression coefficients confirm that reduced stand-off distance is a necessary condition for sufficient arc constriction. Supplementary linear regression models indicate that applied current governs melt pool depth, whereas scanning speed is the primary determinant of width variation. The combined framework establishes a reproducible basis for process parameter hierarchy analysis in arc-driven powder bed systems and provides a foundation for regression-based process optimisation.
This study presents a methodology for predicting the geometric features of single tracks of 316L stainless steel produced by Powder-Bed Arc Additive Manufacturing (PBAAM) from four independent process parameters using a multi-modal Physics-Informed Neural Network (PINN). PBAAM shares the same powder-deposition and layering scheme as Laser Powder Bed Fusion (LPBF) but uses a low-current micro-TIG arc rather than a laser as the heat source. A multi-task PINN architecture was developed that simultaneously predicts five geometric features measured from two imaging modalities (top-view and side-view arc), namely the arc core diameter (Dq), the arc cone angle (αc), the heat-affected zone width (wHAZ), the track core width (dcore) and the areal equivalent track width (wiz), from four input parameters (arc current, traverse speed, work angle and working distance). The model was assessed on a full-factorial training matrix of 36 experiments and on four pure speed extrapolation experiments above the training range. A composite quality score filter classified 23 of the training experiments as stable and 13 as unstable. On the pure validation set, the mean absolute percentage error (MAPE) was 4.25% (95% confidence interval 0.91–8.49) for the arc core diameter, 6.29% (5.07–7.59) for the arc cone angle, 8.06% (6.08–9.82) for the heat-affected zone width, and 17.02% (10.77–21.62) for the track core width. Classical regression baselines attain comparable aggregate errors on this narrowly distributed validation set; the distinguishing property of the proposed model is the joint, physically ordered prediction of all five outputs. The Ayrton voltage sub-module of the model converged to U(I) = 11.33 + 97.13/I without any direct voltage measurement, purely through the physics loss term; this function is consistent with the order of magnitude expected from the physics of low-current TIG arcs. The results indicate that physics-informed learning can be applied to the PBAAM process parameter space under small-sample conditions. This capability is demonstrated for 316L stainless steel, for the micro-TIG electrode configuration and the process window investigated here, for single tracks rather than multi-layer builds, and against a validation set of four experiments varying in a single direction.