Future communications will provide higher transmission rates and higher operating frequencies. In addition, agile beam tracking will be an inevitable trend

A wideband multi-polarized square-horn antenna based on an orthogonal mode transducer (OMT) is developed for working in the whole W-band in this paper. The designed antenna is capable of radiating multiple polarization modes as horizontal polarization (HP) and vertical polarization (VP) when as single-port excitation and left-handed circular polarization (LHCP) and right-handed circular polarization (RHCP) when as dual-port excitation, owing to the characteristic of the OMT with the transmitting of orthogonally polarized waves. A CNC-layered fabrication approach is proposed, which means that the antenna prototype integrating with a Boifot-type OMT, turning waveguide, twisting waveguide and phase shifter is divided into three layers along the vertical direction to be fabricated based on computerized numerical control (CNC) technology. In the design, the turning waveguide and twisting waveguide are employed to achieve plane consistency of the antenna branch ports. Furthermore, a phase shifter is designed to compensate the orthogonally polarized waves, which can keep the phase of the orthogonally polarized waves consistent in a wideband frequency range from 75 GHz to 110 GHz. A prototype is fabricated and measured to verify the performance of the proposed multi-polarization antenna, and the measured results agree well with the simulation ones. In the whole W-band, the value of return loss is better than 10 dB of all polarization modes, and the value of AR of the LHCP and RHCP is below 3.5 dB. The maximum gain of the antenna reaches up to 18.8 dBi at 110 GHz. In addition, regarding the layered structure, the possible layered assembly error analysis is discussed, which verifies the feasibility of the layered machining for this antenna.

A W-band H-plane horn array antenna with tilted radiation beam based on waveguide structure is proposed in this paper. The designed antenna array consists of four H-plane antenna elements and a broadband feed network. The distribution of excitations is determined by the theory of maximum power transmission efficiency (MMPTE). A multiple branch coupler, two T-junctions and three fixed phase shifters are employed to construct the feed network, which can generate the required amplitude and phase in broadband frequency range from 80 GHz to 100 GHz. The computer numerical control (CNC) milling machines technology is employed to machine the feed network and antenna. All measured and simulated results are in good agreement, which verify the feasibility of the theory of MMPTE to generate a radiation beam directed to any angle from −35° to 35° with suitable excitation provided by the proposed feed network in this paper.

In this paper, a W-band waveguide bandpass filter with a standard fourth-order Chebyshev response is proposed based on the computer numerical control (CNC)-milling technology. The harmonics-staggered technique and orthogonal coupling method are incorporated into this waveguide filter design without increasing the complexity of the filter structure in order to suppress the intrinsic spurious responses near the passband. Furthermore, the proposed filter design maintains a simple construction, which can be conveniently fabricated using CNC milling. The fabricated waveguide filter exhibits an average insertion loss of 0.9 dB and a return loss of above 20 dB in a 3 dB fractional bandwidth (FBW) of 5.5% centered at 85 GHz. The excellent spurious suppression property can reach better than −25 dB up to 165 GHz. The wide stopband performance of the proposed W-band filter is very competitive compared with the reported waveguide filters.