Modern terahertz (THz) receivers used in radio astronomy are aimed at developing multi-pixel instruments, in which polarization twists are often required. In this paper, an all-in-one and low-loss 90° waveguide twist is developed for working over the full WR-3 band. A square waveguide junction with doubler-corner-cut is integrated between the H-plane and E-plane waveguides to provide 90° polarization rotating. All the vertical corners are fillet to comply with the fabrication constraints of the current computer numerical control (CNC) machining. The prototype integrated with a twist section of 1/4 wavelength thickness and two straight waveguides with total 12 mm length is processed through means of split-block. Measured results exhibit a low insertion loss of 0.4 dB and better than 25 dB return loss across the entire WR-3 band, which are all in good agreement with simulations. Such excellent performance is highlighted comparing with the reported THz waveguide twists, which indicates that this compact design is well suited for delicate CNC-machining restrictions in THz band.
5 April 2021 in IEEE Transactions on Terahertz Science and Technology
On-chip filters play an invaluable role in most detectors and instruments, blocking unwanted, harmonic, or mirrored signals. In this article, two coplanar waveguide bandpass filters working at 350 GHz are designed based on quarter-wavelength stepped impedance resonators, which can be easily integrated in on-chip systems. A second-order filter with a classical Chebyshev response and a fourth-order filter with quasi-elliptical characteristic is developed together to define the roll-off performance. Both filters are patterned based on superconducting niobium film by the optical lithography and lift-off process, which could reduce the significant metallic loss in high terahertz band. All the chips integrated with transitions are evaluated through a quasi-optical system, which is built based on the sensitive superconductor-insulator-superconductor tunnel junction detector at cryogenic temperature. The calibrated transmission responses, which are matched with simulations, have indicated that such superconducting coplanar waveguide filters can be enabled in future terahertz astronomical spectrometer.
30 January 2018 in IEEE Transactions on Applied Superconductivity
Superconducting titanium thin films are good candidates for transition edge sensors. In this paper, we deposit titanium thin films on cooled silicon-on-insulator substrates by using electron-beam evaporation. The deposition rate dependence of the film stress, resistivity and superconducting transition temperature are presented and analyzed. The relationship between film electrical properties and thickness is discussed. For investigating the heating influence on thin Ti films, a depth profile of oxygen diffusion in the films is also analyzed by X-ray photoelectron spectroscopy.
19 March 2019 in IEEE Transactions on Applied Superconductivity
Superconducting transition-edge sensors (TESs), working as single-photon detectorswith high quantum efficiency, low dark count rate and photon number resolving capability, have been successfully used in quantum information experiments as well as astronomical transient object observations. Aiming to achieve high count rate, we are developing titanium-based superconducting TES single-photon detectors with a critical temperature of ∼300 mK. Ti-based TESs with active area from 10μm×10μm to 40μm×40μm are firstly fabricated on silicon substrate coated with $\rm SiO_x$ . The fabricated TES devices show a thermal conductance scaling with the active area and aneffective time constant of ∼4 μsfrom pulsed laser diode illumination. In order to gethigh quantum efficiency, we further design and fabricatea 1550nm optical cavity based on dielectric mirror and antireflection layer, and study its absorption with an IR spectrometer. Ti TES devices on the dielectric mirror are then fabricated and the superconducting transition is measured.
3 January 2020 in IEEE Transactions on Terahertz Science and Technology
We have developed a 1.2 m submillimeter-wave telescope at the summit of Mt. Fuji to survey emission lines of the neutral carbon atom toward the Milky Way. A superconductor-insulator-superconductor mixer receiver on the Nasmyth focus is used to observe the 492 GHz band in SSB and the 345 GHz band in DSB simultaneously. The receiver noise temperature is 300 K in SSB and 200 K in DSB for 492 and 345 GHz, respectively. The intermediate frequency frequency is GHz. An acousto-optical spectrometer which has the total bandwidth of 0.9 GHz and 1024 channel outputs has also been developed. The telescope was installed at the summit of Mt. Fuji (alt. 3725 m) in July 1998. It has been remotely operated via a satellite communication system from Tokyo or Nobeyama. Atmospheric opacity at Mt. Fuji was 0.4–1.0 at 492 GHz during 30% of the time and 0.07–0.5 at 345 GHz during 60% of the time from November 1998 to February 1999. The system noise temperature was K in SSB at 492 GHz and K in DSB at 345 GHz. We observed the CI 492 GHz) and CO 345 GHz) emission lines from nearby molecular clouds with the beam size of 2.̓2 and 3.̓1, respectively. We describe the telescope system and report the performance obtained in the 1998 winter.