An Ag-graphene layers-coated H-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor with a U-shaped grooves open structure for refractive index (RI) sensing is proposed and numerically simulated by the finite element method (FEM). The designed sensor could solve the problems of air-holes material coating and analyte filling in PCF. Two big air-holes in the x-axis produce a birefringence phenomenon leading to the confinement loss and sensitivity of x-polarized light being much stronger than y-polarized. Graphene is deposited on the layer of silver in the grooves; its high surface to volume ratio and rich π conjugation make it a suitable dielectric layer for sensing. The effect of structure parameters such as air-holes size, U-shaped grooves depth, thickness of the silver layer and number of graphene layers on the sensing performance of the proposed sensor are numerical simulated. A large analyte RI range from 1.33 to 1.41 is calculated and the highest wavelength sensitivity is 12,600 nm/RIU. In the linear RI sensing region of 1.33 to 1.36; the average wavelength sensitivity we obtained can reach 2770 nm/RIU with a resolution of 3.61 × 10⁻⁵ RIU. This work provides a reference for developing a high-sensitivity; multi-parameter measurement sensor potentially useful for water pollution monitoring and biosensing in the future.

To solve the problem of air hole coating and analyte filling in microstructured optical fiber-based surface plasmon resonance (SPR) sensors, we designed an exposed-core grapefruit fiber (EC-GFs)-based SPR sensor. The exposed section of the EC-GF is coated with a SPR, supporting thin silver film, which can sense the analyte in the external environment. The asymmetrically coated fiber can support two separate resonance peaks (x- and y-polarized peaks) with orthogonal polarizations and x-polarized peak, providing a much higher peak loss than y-polarized, also the x-polarized peak has higher wavelength and amplitude sensitivities. A large analyte refractive index (RI) range from 1.33 to 1.42 is calculated to investigate the sensing performance of the sensor, and an extremely high wavelength sensitivity of 13,500 nm/refractive index unit (RIU) is obtained. The silver layer thickness, which may affect the sensing performance, is also discussed. This work can provide a reference for developing a high sensitivity, real-time, fast-response, and distributed SPR RI sensor.

A relative humidity (RH) sensor based on single-mode–no-core–single-mode fiber (SNCS) structure is proposed and experimentally demonstrated. The agarose gel is coated on the no-core fiber (NCF) as the cladding, and multimode interference (MMI) occurs in the SNCS structure. The transmission spectrum of the sensor is modulated at different ambient relative humidities due to the tunable refractive index property of the agarose gel film. The relative humidity can be measured by the wavelength shift and intensity variation of the dip in the transmission spectra. The humidity response of the sensors, coated with different concentrations and coating numbers of the agarose solution, were experimentally investigated. The wavelength and intensity sensitivity is obtained as −149 pm/%RH and −0.075 dB/%RH in the range of 30% RH to 75% RH, respectively. The rise and fall time is tested to be 4.8 s and 7.1 s, respectively. The proposed sensor has a great potential in real-time RH monitoring.

Multimode interferometers based on the single-mode-no-core-single-mode fiber (SNCS) structure have been widely investigated as functional devices and sensors. However, the theoretical support for the sensing mechanism is still imperfect, especially for the cladding refractive index response. In this paper, a modified model of no-core fiber (NCF) based on far from cut-off approximation is proposed to investigate the spectrum characteristic and sensing mechanism of the SNCS structure. Guided-mode propagation analysis (MPA) is used to analyze the self-image effect and spectrum response to the cladding refractive index and temperature. Verified by experiments, the performance of the SNCS structure can be estimated specifically and easily by the proposed method.

We demonstrate a high-resolution temperature sensor based on optical heterodyne spectroscopy technology by virtue of the narrow linewidth characteristic of a single-frequency fiber laser. When the single-frequency ring fiber laser has a Lorentzian-linewidth <1 kHz and the temperature sensor operates in the range of 3−85 °C, an average sensitivity of 14.74 pm/°C is obtained by an optical spectrum analyzer. Furthermore, a resolution as high as ~5 × 10⁻³ °C is demonstrated through optical heterodyne spectroscopy technology by an electrical spectrum analyzer in the range of 18.26–18.71 °C with the figure of merit up to 3.1 × 10⁵ in the experiment.

A high sensitivity hollow fiber (HF) temperature sensor based on surface plasmon resonance (SPR) and liquid core is designed and analyzed using finite element method (FEM). Toluene with high refractive index (RI) and large thermo-optic coefficient is sealed into the hollow-core of the fiber to guarantee the total internal reflection (TIR) and works as the sensing medium. One single air hole near the fiber core is coated with gold to generate surface plasmons (SPs) and two orthogonal polarization core modes (HE11x and HE11y) can be supported due to the asymmetrical SPR region. Contrary to the blue-shift of other liquid filled SPR temperature sensors, the resonance peak of the designed sensor shifts to the longer wavelength with temperature increasing. A large temperature range from 20°C to 100°C is calculated and the extremely high sensitivity 6.51 nm/°C in good linear relationship is obtained. Moreover, the structure parameters and liquid factors are also discussed to optimize the sensor's performance.