Biomass-derived bio-oil is a sustainable and renewable energy resource, and liquefaction is a potential conversion way to produce bio-oil. Emulsification is a physical upgrading technology, which blends immiscible liquids into a homogeneous emulsion through the addition of an emulsifier. Liquefaction bio-oil from food waste is characterized by its high pour point when compared to diesel fuel. In order to partially replace diesel fuel by liquefaction bio-oil, this study aimed to develop a method to simultaneously extract and emulsify the bio-oil using a commercial surfactant (Atlox 4914, CRODA, Snaith, UK). The solubility and stability of the emulsions at various operating conditions such as the bio-oil-to-emulsifier ratio (B/E ratio), storage temperature and duration, and co-surfactant (methanol) addition were analyzed. The results demonstrate that higher amounts of bio-oil (7 g) and emulsifier (7 g) at a B/E ratio = 1 in an emulsion have a higher solubility (66.48 wt %). When the B/E ratio was decreased from 1 to 0.556, the bio-oil solubility was enhanced by 45.79%, even though the storage duration was up to 7 days. Compared to the emulsion stored at room temperature (25 °C), its storage at 100 °C presented a higher solubility, especially at higher B/E ratios. Moreover, when methanol was added as a co-surfactant during emulsification at higher B/E ratios (0.714 to 1), it rendered better solubility (58.83–70.96 wt %). Overall, the emulsified oil showed greater stability after the extraction-emulsification process.
Thermal hydrolysis pretreatment (THP) increases the solubilization of sewage sludge, while bioelectrochemically assisted anaerobic digestion (BEAD) enhances the conversion of the solubilized organic matter into methane and improves reactor stability in the presence of inhibitory compounds. In this study, by mapping methane production in a BEAD reactor against the soluble organic loading rate (sOLR), determined from soluble chemical oxygen demand (sCOD) measurements, distinct operational regimes corresponding to different THP temperatures were identified. With the 120 °C pretreated feedstock, the BEAD reactor operated in a hydrolysis-limited regime, where increasing sOLR increased methane production but reduced conversion efficiency. Accordingly, at an sOLR of 4.5 g (LR d)−1, a volumetric methane production rate of 0.8 L LR−1 was achieved. Increasing THP severity to 150 °C improved solids solubilization and shifted the system into a kinetically enhanced regime, in which methane production was directly proportional to sOLR, indicating improved substrate accessibility and reaction kinetics. Consequently, at an sOLR of 7.75 g (LR d)−1, methane production reached 1.46 L LR−1. This regime-based analysis provides quantitative guidance for selecting pretreatment severity and loading strategies to maximize methane production, while maintaining stable BEAD reactor operation at high organic loads.