Huolin Huang

Prof. Huolin Huang

School of Optoelectronic Engineering and Instrumentation Science, Dalian University of Technology, Dalian 116024, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 December 2019 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
SASun Amu
Sun Amu
WCWanxi Cheng
Wanxi Cheng
JGJun Gao
Jun Gao
HLHuinan Liang
Huinan Liang
Huolin HuangHuolin Huang
Huolin Huang
SLShaoquan Li
Shaoquan Li
Enhancement-mode (E-mode) GaN-based MIS-HEMTs still suffer from undeniable gate leakage or low gate breakdown voltage due to the low quality of gate dielectrics, resulting in a notorious tailing effect of the off-state current. In this letter, a gate scheme featuring SiON/Al2O3 stack dielectrics and partially recessed gate barrier has been employed in the AlGaN/GaN MIS-HEMTs. A high on/off current ratio over 109 and a small threshold voltage (Vth) hysteresis less than 20 mV are achieved in the fabricated E-mode devices with a Vth around 2.5 V, mainly owing to the reduction of the net positive fixed charge density in the SiON/Al2O3 gate stack confirmed by the C-V measurements. Meanwhile, a good performance uniformity on 6-inch wafer is achieved which demonstrates the promising scheme for fabricating GaN-based E-mode MIS-HEMT products.

10 December 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
NSNan Sun
Nan Sun
Huolin HuangHuolin Huang
Huolin Huang
SASun Amu
Sun Amu
RWRonghua Wang
Ronghua Wang
SLShuxing Li
Shuxing Li
HLHuinan Liang
Huinan Liang
Robust and reliable gate scheme is crucial in developing the enhancement-mode (E-mode) AlGaN/GaN metal–insulator–semiconductor (MIS)-high electron mobility transistors (HEMTs). This work reports on a method of mixed oxygen and fluorine plasma pretreatment combined with selected bi-layer gate dielectrics to improve the performances of partially recessed-gate MIS-HEMTs. The fabricated E-mode HEMTs exhibit significantly boosted threshold voltage of 2.5 V and gate breakdown voltage of 26 V, as well as improved device reliability on 6-in wafer under both bias and temperature stresses. Remarkably reduced ${V}_{\text {th}}$ shift is found even at 250 °C high temperature. Furthermore, measurements on gate breakdown lifetime show a ten-year lifetime of the fabricated devices when the gate bias is kept below 13.1 V which demonstrates a promising scheme in fabricating the E-mode HEMT products.

23 July 2024 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
Huolin HuangHuolin Huang
Huolin Huang
YLYun Lei
Yun Lei
NSNan Sun
Nan Sun
With the continuous improvement of the power density and operating frequency in power conversion systems, it is necessary to develop the new power electronic products with better performances than the conventional semiconductors. As a typical representative of the wide-bandgap semiconductors, gallium nitride (GaN)-based heterostructure has unique high-density two-dimensional electron gas (2DEG) and hence can be used to fabricate the fast high electron mobility transistors (HEMTs) with low power loss. Therefore, it is considered as a promising candidate for the next-generation power devices to improve the switching efficiency and speed. Compared with the depletion mode (D-mode, also known as normally-on) devices, the enhancement-mode (E-mode, also known as normally-off) devices have the advantages of safety, energy-saving, and better circuit topology design, making them more attractive for industry applications. In this paper, the different structure schemes and fabrication technologies of the GaN-based E-mode HEMTs are reviewed and summarized. Their technical characteristics are systematically compared. The influences of material epitaxial structure, ohmic contact, material etching, field plate design, and passivation process on the device performances are discussed in detail wherein the fabrication process of the recessed-gate MIS-HEMTs are emphatically illustrated, focusing on the interface treatment technology and dielectric engineering. In addition, the complicated reliability issues in the E-mode HEMTs induced by high temperature, high voltage, and high frequency switching and corresponding physical mechanisms are introduced and discussed. Finally, the potential technical solutions are proposed and the future application fields of GaN-based E-mode HEMTs are prospected.

2 August 2018 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
Huolin HuangHuolin Huang
Huolin Huang
ZSZhonghao Sun
Zhonghao Sun
YCYaqing Cao
Yaqing Cao
FLFeiyu Li
Feiyu Li
FZFeng Zhang
Feng Zhang
LHLizhong Hu
Lizhong Hu
This paper reports on the studies of current collapse phenomenon induced by surface trapped charges during gate pulse switching in AlGaN/GaN heterostructure high-electron-mobility transistors. A physical-based model, taking into account the distribution features of the applied electric field along the surface of the device barrier layer near the drain-side gate corner, is proposed to analyse the electron trapping and de-trapping processes at the ionized donor-like traps during the device off-state or on-state process. Then the model is analysed and verified by TCAD simulation and laboratory measurement data. The morphology of the current collapse related AlGaN surface is investigated by SEM and AFM characterizations. The dynamic process and quantitative relationship between the electric field and trapped electron density are determined and analysed in detail. The spatial distributions of the trapped electrons and excess free electrons along AlGaN barrier surface are achieved by using the proposed physical model. The work provides a distinct perspective to understand and quantify the current collapse mechanism in AlGaN/GaN power devices, and it can also assist engineers for a better device design.

24 February 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
FLFeiyu Li
Feiyu Li
RWR. Wang
R. Wang
Huolin HuangHuolin Huang
Huolin Huang
YRY. Ren
Y. Ren
ZLZ. Liang
Z. Liang
HLH. Liang
H. Liang
This article proposed a hard switching high-temperature reverse bias (HS-HTRB) stress test method with a high measurement delay tolerance to study the impacts and mechanisms of hot electron effects on the stability of threshold voltage ( $V_{\mathrm {th}}$ ) in 650-V gallium nitride (GaN)-based metal–insulator–semiconductor high-election mobility transistors (MIS-HEMTs). Conventional HTRB and high-temperature constant source current (HTSC) stress tests have been carried out as well. The electric field caused emission (or detrapping) of electrons in dielectrics results in a negative $V_{\mathrm {th}}$ shift, while buffer electron trapping leads to a positive $V_{\mathrm {th}}$ shift and degrades subthreshold slope. The hot current affects $V_{\mathrm {th}}$ in two different ways: channel impact ionization generates and accumulates holes under the gate and, thus, shifts $V_{\mathrm {th}}$ negatively by lowering the gate–source barrier, while injected hot electrons themselves shift $V_{\mathrm {th}}$ positively by depleting the channel electrons. As temperature rises, the intensity of impact ionization decreases while the hot electron injection strengthens. The appropriate level of hot current and substrate termination can help compensate the field-induced negative $V_{\mathrm {th}}$ shifts, ensuring a more stable working $V_{\mathrm {th}}$ and, thus, a more reliable device for HS operations.

9 October 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZHZifan Hong
Zifan Hong
CZChuanlun Zhang
Chuanlun Zhang
JLJialong Lin
Jialong Lin
JDJianxun Dai
Jianxun Dai
JZJie Zhang
Jie Zhang
WYWeifeng Yang
Weifeng Yang
We demonstrate for the first time a vertical metal/AlN/ $\beta $ -gallium oxide ( $\beta $ -Ga2O3) metal-insulator–semiconductor (MIS) Schottky barrier diode (SBD) with low turn-on voltage ( ${V}_{\text {on}}$ ) and reverse leakage current. By employing an ultrathin AlN layer enabled by atomic layer deposition (ALD), the resulting AlN/ $\beta $ -Ga2O3 MIS SBD exhibits a remarkably low leakage current of $0.1~\mu $ A/cm2, which is three orders of magnitude smaller than that of the conventional $\beta $ -Ga2O3 SBD. Meanwhile, the AlN/ $\beta $ -Ga2O3 MIS SBD shows a significantly improved breakdown voltage from 208 V up to 890 V, while maintaining a relatively low ${V}_{\text {on}}$ of 0.92 V and on-resistance ( ${R}_{\text {on}}$ ) of 11.8 m $\Omega \cdot $ cm2, respectively. I–V measurements conducted across a range of temperatures from 298 to 432 K indicate that thermionic field emission (TFE) and trap-assisted tunneling (TAT) are the predominant electron transport mechanisms under forward bias if inserting 2 nm AlN, while TFE becomes dominant mechanism when the AlN thickness increases up to 5 nm. X-ray photoelectron spectroscopy (XPS) characterizations reveal the type I alignment for AlN/ $\beta $ -Ga2O3 heterojunction with a large conduction band offset ( $\Delta {E}_{C}$ ) of 1 eV, which could function as an electron transport barrier under reverse conditions, thereby greatly suppressing the leakage current. Our study for the first time suggests a great potential for ALD-derived AlN films to be an interfacial layer in $\beta $ -Ga2O3 SBDs and the AlN/ $\beta $ -Ga2O3 SBDs with state-of-art performances open up more opportunities in future power electronics.