This article proposed a hard switching high-temperature reverse bias (HS-HTRB) stress test method with a high measurement delay tolerance to study the impacts and mechanisms of hot electron effects on the stability of threshold voltage ( $V_{\mathrm {th}}$ ) in 650-V gallium nitride (GaN)-based metal–insulator–semiconductor high-election mobility transistors (MIS-HEMTs). Conventional HTRB and high-temperature constant source current (HTSC) stress tests have been carried out as well. The electric field caused emission (or detrapping) of electrons in dielectrics results in a negative $V_{\mathrm {th}}$ shift, while buffer electron trapping leads to a positive $V_{\mathrm {th}}$ shift and degrades subthreshold slope. The hot current affects $V_{\mathrm {th}}$ in two different ways: channel impact ionization generates and accumulates holes under the gate and, thus, shifts $V_{\mathrm {th}}$ negatively by lowering the gate–source barrier, while injected hot electrons themselves shift $V_{\mathrm {th}}$ positively by depleting the channel electrons. As temperature rises, the intensity of impact ionization decreases while the hot electron injection strengthens. The appropriate level of hot current and substrate termination can help compensate the field-induced negative $V_{\mathrm {th}}$ shifts, ensuring a more stable working $V_{\mathrm {th}}$ and, thus, a more reliable device for HS operations.
Temperature-dependent threshold voltage (Vth) stability is a significant issue in the practical application of semi-conductor power devices, especially when they are undergoing a repeated high-temperature operation condition. The Vth analytical model and its stability are dependent on high-temperature operations in wide-bandgap gallium nitride (GaN)-based high electron mobility transistor (HEMT) devices that were investigated in this work. The temperature effects on the physical parameters—such as barrier height, conduction band, and polarization charge—were analysed to understand the mechanism of Vth stability. The Vth analytical model under high-temperature operation was then proposed and developed to study the measurement temperatures and repeated rounds dependent on Vth stability. The validity of the model was verified by comparing the theoretical calculation data with the experimental measurement and technology computer-aided design (TCAD) simulation results. This work provides an effective theoretical reference on the Vth stability of power devices in practical, high-temperature applications.
15 December 2009 in Journal of Thermal Analysis and Calorimetry
This article presents a high-efficiency multi-phase switched-capacitor (SC) dc–dc converter targeting on fast dynamic voltage scaling (DVS) applications. The proposed always-dual-path multi-phase scheme as well as three-step voltage conversion ratio (VCR) transition strategy can ensure dynamic $C_{\mathrm{FLY}}$ reallocation to achieve continuous output charge delivery for both steady state and VCR transition operations without extra $C_{\mathrm{FLY}}$ . Together with the customized digital controller, the proposed SC converter can enable $C_{\mathrm{LOAD}}$ -free operation for fast and robust DVS transitions while relaxing the associated dynamic loss. We further investigate on an all NMOS power switch implementation to optimize both the DVS speed and switching loss. Fabricated in 65-nm CMOS, the proposed SC converter achieves step-down VCRs of 5:4/3/2/1. It can provide an output voltage $V_{\mathrm{OUT}}$ from 0.16 to 0.96 V with an input voltage $V_{\mathrm{IN}}$ of 1.2 V, while achieving a measured steady state peak power conversion efficiency (PCE) of 93.4%. The measured peak dynamic PCE when switching between 5:4 and 5:3 at a VCR transition frequency ( $f_{\mathrm{VCR\_TRAN}})$ of 100 kHz is 89.6%. With $f_{\mathrm{VCR\_TRAN}}$ increasing from 1 to 800 kHz, the measured dynamic PCE droop for 5:4 $\leftrightarrow $ 5:3 is only 0.83%. This work achieves high peak PCE over a wide VCR range while exhibiting a DVS speed up to 222.5 mV/ns, corresponding to a $\sim$ 2 $\times$ improvement over similar prior arts.
A gallium nitride (GaN) semiconductor vertical field-effect transistor (VFET) has several attractive advantages such as high power density capability and small device size. Currently, some of the main issues hindering its development include the realization of normally off operation and the improvement of high breakdown voltage (BV) characteristics. In this work, a trenched-gate scheme is employed to realize the normally off VFET. Meanwhile, an additional back current blocking layer (BCBL) is proposed and inserted into the GaN normally off VFET to improve the device performance. The electrical characteristics of the proposed device (called BCBL-VFET) are investigated systematically and the structural parameters are optimized through theoretical calculations and TCAD simulations. We demonstrate that the BCBL-VFET exhibits a normally off operation with a large positive threshold voltage of 3.5 V and an obviously increased BV of 1800 V owing to the uniform electric field distribution achieved around the gate region. However, the device only shows a small degradation of on-resistance (RON). The proposed scheme provides a useful reference for engineers in device fabrication work and will be promising for the applications of power electronics.