Enhancement-mode (E-mode) GaN-based MIS-HEMTs still suffer from undeniable gate leakage or low gate breakdown voltage due to the low quality of gate dielectrics, resulting in a notorious tailing effect of the off-state current. In this letter, a gate scheme featuring SiON/Al2O3 stack dielectrics and partially recessed gate barrier has been employed in the AlGaN/GaN MIS-HEMTs. A high on/off current ratio over 109 and a small threshold voltage (Vth) hysteresis less than 20 mV are achieved in the fabricated E-mode devices with a Vth around 2.5 V, mainly owing to the reduction of the net positive fixed charge density in the SiON/Al2O3 gate stack confirmed by the C-V measurements. Meanwhile, a good performance uniformity on 6-inch wafer is achieved which demonstrates the promising scheme for fabricating GaN-based E-mode MIS-HEMT products.
10 December 2021 in IEEE Transactions on Electron Devices
Robust and reliable gate scheme is crucial in developing the enhancement-mode (E-mode) AlGaN/GaN metal–insulator–semiconductor (MIS)-high electron mobility transistors (HEMTs). This work reports on a method of mixed oxygen and fluorine plasma pretreatment combined with selected bi-layer gate dielectrics to improve the performances of partially recessed-gate MIS-HEMTs. The fabricated E-mode HEMTs exhibit significantly boosted threshold voltage of 2.5 V and gate breakdown voltage of 26 V, as well as improved device reliability on 6-in wafer under both bias and temperature stresses. Remarkably reduced ${V}_{\text {th}}$ shift is found even at 250 °C high temperature. Furthermore, measurements on gate breakdown lifetime show a ten-year lifetime of the fabricated devices when the gate bias is kept below 13.1 V which demonstrates a promising scheme in fabricating the E-mode HEMT products.
24 February 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This article proposed a hard switching high-temperature reverse bias (HS-HTRB) stress test method with a high measurement delay tolerance to study the impacts and mechanisms of hot electron effects on the stability of threshold voltage ( $V_{\mathrm {th}}$ ) in 650-V gallium nitride (GaN)-based metal–insulator–semiconductor high-election mobility transistors (MIS-HEMTs). Conventional HTRB and high-temperature constant source current (HTSC) stress tests have been carried out as well. The electric field caused emission (or detrapping) of electrons in dielectrics results in a negative $V_{\mathrm {th}}$ shift, while buffer electron trapping leads to a positive $V_{\mathrm {th}}$ shift and degrades subthreshold slope. The hot current affects $V_{\mathrm {th}}$ in two different ways: channel impact ionization generates and accumulates holes under the gate and, thus, shifts $V_{\mathrm {th}}$ negatively by lowering the gate–source barrier, while injected hot electrons themselves shift $V_{\mathrm {th}}$ positively by depleting the channel electrons. As temperature rises, the intensity of impact ionization decreases while the hot electron injection strengthens. The appropriate level of hot current and substrate termination can help compensate the field-induced negative $V_{\mathrm {th}}$ shifts, ensuring a more stable working $V_{\mathrm {th}}$ and, thus, a more reliable device for HS operations.
Temperature-dependent threshold voltage (Vth) stability is a significant issue in the practical application of semi-conductor power devices, especially when they are undergoing a repeated high-temperature operation condition. The Vth analytical model and its stability are dependent on high-temperature operations in wide-bandgap gallium nitride (GaN)-based high electron mobility transistor (HEMT) devices that were investigated in this work. The temperature effects on the physical parameters—such as barrier height, conduction band, and polarization charge—were analysed to understand the mechanism of Vth stability. The Vth analytical model under high-temperature operation was then proposed and developed to study the measurement temperatures and repeated rounds dependent on Vth stability. The validity of the model was verified by comparing the theoretical calculation data with the experimental measurement and technology computer-aided design (TCAD) simulation results. This work provides an effective theoretical reference on the Vth stability of power devices in practical, high-temperature applications.
22 October 2020 in Journal of Physics D: Applied Physics
In this work, we performed an investigation on the electrical characteristics of the interfaces of SiON/AlGaN and SiON/GaN by fabricating a partially gate-recessed metal-insulator-semiconductor high electron mobility transistor (MIS-HEMT) and a fully gate-recessed metal-insulator-semiconductor field-effect transistor (MIS-FET). The fabricated MIS-HEMT exhibits a smaller static on-resistance ( Ron ) of 12.7 Ω · mm, while the MIS-FET achieves the normally-off operation. As a result of over-etching in the gate trench, a higher trap state density of 2 × 10 13 cm −2 eV −1 at the SiON/GaN interface in comparison to SiON/AlGaN interface (8 × 10 12 cm −2 eV −1 ), leading to a more obvious degradation of subthreshold swing, was extracted after performing the high temperature IDS − VGS tests. In addition, compared with the MIS-FET, the traps distributed at the SiON/AlGaN interface are found to be located at a deeper energy level, which make the device more stress sensitive and can cause a greater threshold voltage ( Vth ) shift in the drain-bias stress measurement. The drain-bias stress at off-state increases the ionized trap density and makes the ionized traps unrecoverable within 1000 s in the MIS-HEMT. This work reveals the different properties of traps states at the SiON/AlGaN and SiON/GaN interfaces, and their effects on the device reliability.
A novel structure scheme by transposing the gate channel orientation from a long horizontal one to a short vertical one is proposed and verified by technology computer-aided design (TCAD) simulations to achieve GaN-based normally-off high electron mobility transistors (HEMTs) with reduced on-resistance and improved threshold voltage. The proposed devices exhibit high threshold voltage of 3.1 V, high peak transconductance of 213 mS, and much lower on-resistance of 0.53 mΩ·cm2 while displaying better off-state characteristics owing to more uniform electric field distribution around the recessed gate edge in comparison to the conventional lateral HEMTs. The proposed scheme provides a new technical approach to realize high-performance normally-off HEMTs.