Zhao Qiu

Dr. Zhao Qiu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2023 in Buildings
Verified
Journal Article
Open access
PDF file
XZXiaoming Zhao
Xiaoming Zhao
WXWei Xiang
Wei Xiang
YYYaofeng Yang
Yaofeng Yang
YWYing Wang
Ying Wang
JTJing Tao
Jing Tao
FXFeng Xiao
Feng Xiao
This study investigated the flexural behavior of prefabricated RC bridge decks with different joint materials, normal strength concrete or UHPC (normal strength concrete for RC deck, while UHPC means ultra-high performance concrete). A total of three specimens were tested and subjected to four-point bending loads. The load–deflection curve, strain curve, load–crack width curve, and failure mode were analyzed. Numerical models with cohesive models were built and verified with test results to explore the force-transferring mechanism. The results show that UHPC effectively improved the crack strength, flexural strength, and failure mode. Compared with the joint with normal-strength concrete, the crack strength and flexural strength increased by 66.7% and 6%, respectively. The failure mode of the specimen with UHPC as joint material changed from a concentrated cracking failure of the joint to a multi-crack development failure. The behavior of the specimen with UHPC as joint material was similar to the monolithically cast specimen. In addition, the application of the current design method was evaluated and compared with test results.

13 October 2017 in Transactions of Tianjin University
Verified
Journal Article
Closed access
PDF file
ZQZhao Qiu
Zhao Qiu
KCKongsheng Chen
Kongsheng Chen
MCMeizhong Chen
Meizhong Chen
Bruno BriseghellaBruno Briseghella
Bruno Briseghella
ZGZhiyong Guo
Zhiyong Guo
GYGuotao Yang
Guotao Yang

13 July 2023 in Buildings
Verified
Journal Article
Open access
PDF file
CQCheng Qian
Cheng Qian
ZYZhian Yao
Zhian Yao
HCHuanyong Chen
Huanyong Chen
DLDewei Liu
Dewei Liu
MLMingyi Lin
Mingyi Lin
BZBin Zhang
Bin Zhang
With the development of the economy and transportation, more and more cross-sea bridges are appearing in people’s view. However, cross-sea bridges are not only subjected to repeated traffic loads but also to corrosion from the marine environment. In addition, the steel box girder deck plate is directly subjected to repeated vehicle loads, and its welded details are highly susceptible to fatigue damage and destruction, resulting in fatigue or corrosion damage to the welded top plate-U rib of the cross-sea steel box girder. This paper is based on fracture mechanics analysis methods and finite element simulation analysis, in order to establish the numerical analysis method of the welded top plate-U rib of the steel box girder deck plate fatigue, which is to take into account the coupling of the marine corrosive environment and fatigue cyclic loading, explore the welded top plate-U rib of the stress intensity factor, crack expansion, crack expansion life and total fatigue life of the welded details. Furthermore, the establishment of the welded top plate-U rib corrosion fatigue life assessment model is to explore the fatigue life of different top plate thicknesses. The results show that: the stress intensity factor along the crack front is symmetrically distributed, and with the increase in the crack expansion step, the corresponding stress intensity factor amplitude is also increasing; in addition, with the increase in the top plate thickness, fatigue crack expansion rate significantly reduced.

26 April 2025 in Buildings
Verified
Journal Article
Open access
PDF file
BSBing Shangguan
Bing Shangguan
JLJie Li
Jie Li
ZQZhao Qiu
Zhao Qiu
PCPeng Chen
Peng Chen
RFRuan Furong
Ruan Furong
HPHuiteng Pei
Huiteng Pei
This study experimentally and numerically investigated the overall buckling behavior of steel box column components. Two box section specimens were fabricated for axial compression tests. Prior to the tests, the material properties, initial geometric imperfections and residual stress were measured. In addition, an extended parameter analysis was conducted using a finite element model validated by experimental results to evaluate the impact of geometric defects and residual stresses on the bearing capacity of unstiffened and stiffened box section columns. A novel column curve was proposed based on massive datasets of parametric models. The short and long column specimens exhibited typical strength failure and buckling failure modes, respectively. The initial geometric imperfections and residual stresses slightly reduced the buckling strength from the models, with a maximum reduction in buckling strength owing to initial geometric imperfections of 5.2% and that owing to residual stresses of 6.52%. The unstiffened and stiffened box columns have the same stability coefficient when the slenderness ratio is the same. Additionally, the ultimate load capacity calculation formula for stiffened box columns proposed in this paper averages 2.20% higher than Class C curves in JTG D64-2015, lies between Japanese and U.S. codes, and demonstrates good accuracy.

26 January 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SWShuyong Wang
Shuyong Wang
ZQZhao Qiu
Zhao Qiu
PSPengcheng Song
Pengcheng Song
FYFei Yang
Fei Yang
Based on three-dimensional scanning technology, a database of real block stone shapes with varying particle sizes was established, and discrete element models of reinforced concrete with different corrosion rates were developed, accounting for the particle crushing effect. Four-point bending fatigue numerical simulations were conducted on reinforced concrete models with corrosion rates of 0%, 10%, 25%, and 40% to investigate their mechanical characteristics, failure modes, damage evolution, force chain distribution, and energy dissipation. The aim was to reveal the influence mechanism of corrosion on the fatigue performance of reinforced concrete.The results show that for uncorroded specimens, the stiffness ratio decreases gradually, with a residual stiffness of 60%. At a corrosion rate of 40%, the stiffness ratio exhibits a cliff-like drop, leaving only 30% residual stiffness. Deflection growth is markedly accelerated, and the deformation capacity of the structure deteriorates significantly. In terms of failure mode, corrosion causes a gradual transition from ductile bending failure to brittle shear failure. This shift indicates a substantial reduction in both load-bearing capacity and structural safety margin. Damage process analysis reveals that acoustic emission intensity progresses through three stages: micro-crack initiation, stable crack propagation, and rapid crack expansion leading to structural instability. Corrosion accelerates both the initiation and propagation of micro-cracks, causing rapid accumulation and coalescence of internal damage. This process is accompanied by the absorption and release of strain energy, with the peak strain energy of highly corroded specimens decreasing by more than 80%. Regarding force chain distribution, uncorroded specimens have 25% of their force-chains classified as strong, forming an optimal load-transfer path oriented at approximately 45°. As the corrosion rate increases, the proportion of strong force-chains gradually declines.

1 July 2026 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
SZSiqing Zeng
Siqing Zeng
MYMing Yang
Ming Yang
LHLibo Hou
Libo Hou
HLHao Long
Hao Long
YLYuanqing Liu
Yuanqing Liu
ZQZhao Qiu
Zhao Qiu
This study investigates the influence of replacement rate for recycled coarse aggregate (RCA) and recycled fine aggregate (RFA) on the concrete performance in highway reconstruction and expansion projects, and provides theoretical and technical support for its application in non-load-bearing structures (NLBS) and pavements. Through the application research of RCA, the influences of different replacement rates were analyzed, including slump, compressive strength, splitting tensile strength, flexural tensile strength, and wear resistance. Combined with relevant test data, the nonlinear relationship between the replacement rate of RCA and the performance variation was summarized. The application of RFA in NLBS, the influence of RFA replacement rate on slump, compressive strength, and splitting tensile strength (STS) were discussed, and the sensitivity difference of RFA and RCA to concrete performance was compared. Research shows that when RCA is used for NLBS and pavements, the concrete slump reduces significantly when the rate exceeds 20%. In terms of mechanical properties, compressive strength decreases rapidly when the rate exceeds 50%, and STS also continues to decrease. In terms of durability, the flexural strength decreases significantly when the substitution rate exceeds 50%. For RFA in NLBS, both slump and compressive strength decrease sharply once the replacement rate exceeds 30%, while STS decreases continuously with the RFA content. Research recommends that the RCA rate does not exceed 50%, and the RFA rate does not exceed 30%.