Functionalized polyacrylonitrile (PAN) nanofibers were used in the present investigation to enhance the fracture behavior of carbon epoxy composite in order to prevent delamination if any crack propagates in the resin rich area. The main intent of this investigation was to analyze the efficiency of PAN nanofiber as a reinforcing agent for the carbon fiber-based epoxy structural composite. The composites were fabricated with stacked unidirectional carbon fibers and the PAN powder was functionalized with glycidyl methacrylate (GMA) and then used as reinforcement. The fabricated composites’ fracture behavior was analyzed through a double cantilever beam test and the energy release rate of the composites was investigated. The neat PAN and functionalized PAN-reinforced samples had an 18% and a 50% increase in fracture energy, respectively, compared to the control composite. In addition, the samples reinforced with functionalized PAN nanofibers had 27% higher interlaminar strength compared to neat PAN-reinforced composite, implying more efficient stress transformation as well as stress distribution from the matrix phase (resin-rich area) to the reinforcement phase (carbon/phase) of the composites. The enhancement of fracture toughness provides an opportunity to alleviate the prevalent issues in laminated composites for structural operations and facilitate their adoption in industries for critical applications.
A series of polyurethane/ZnO membranes was fabricated via thermal phase inversion of the solution of polymer/nanoparticle in N , N ‐dimethylformamide solvent. The polyurethane synthesis was done via two‐step polymerization method using polytetramethylene glycol, isophorone diisocyanate, and 1,4‐butanediol in the ratio of 1:3:2. Different concentrations of zinc oxide nanoparticles (5, 10, 15, and 20) were incorporated into the polyurethane matrix. FTIR, SEM, and X‐Ray analysis were performed to characterize the membranes. FTIR and SEM results suggests an increment in the phase mixing of polyurethane with ZnO loading. Gas permeation performance through polyurethane‐ZnO mixed matrix membranes with ZnO loading by as much as 20 wt% were elucidated for pure N 2 , O 2 , CH 4 , and CO 2 and gases. Based on the results, all permeability values decreased as the loading of ZnO nanoparticles increased, whereas CO 2 /N 2 and CO 2 /CH 4 selectivities increased. Moreover, interfacial structure of the polyurethane/ZnO nanocomposites were characterized by molecular probing approach. The results revealed the presence of a rigidified polymer chain layer with 65 ± 6 Å thickness around the ZnO nanoparticles.
1 February 2022 in Journal of Natural Gas Science and Engineering
This study reports the synthesis of silver nanoparticles (Ag NPs) using aloe vera extract as a reducing and stabilizing agent. The process involved optimizing parameters such as pH, extract concentration, and silver nitrate levels to produce spherical nanoparticles with an average diameter of 80 ± 8 nm. The synthesis and optical characteristics of the Ag NPs were analyzed with UV–Vis spectroscopy in the range of 300–400 nm. The nanocarriers demonstrated significant antibacterial and antioxidant activities, along with a drug loading efficiency of 38.9%. The drug release studies revealed a pH‐responsive characteristic, with cumulative release values of 77% at neutral pH and 86% at alkaline pH. Cytotoxicity assays on HDF‐1 human dermal fibroblasts confirmed high biocompatibility, even at high nanoparticle concentrations. These findings highlight the potential of the optimized Ag–Av nanocarriers as safe and effective candidates for wound healing applications.