The massive plastic production worldwide leads to a global concern for the pollution made by the plastic wastes and the environmental issues associated with them. One of the best solutions is replacing the fossil-based plastics with bioplastics. Bioplastics such as polylactic acid (PLA) are biodegradable materials with less greenhouse gas (GHG) emissions. PLA is a biopolymer produced from natural resources with good mechanical and chemical properties, therefore, it is used widely in packaging, agriculture, and biomedical industries. PLA products mostly end up in landfills or composting. In this review paper, the existing life cycle assessments (LCA) for PLA were comprehensively reviewed and classified. According to the LCAs, the energy and materials used in the whole life cycle of PLA were reported. Finally, the GHG emissions of PLA in each stage of its life cycle, including feedstock acquisition and conversion, manufacturing of PLA products, the PLA applications, and the end of life (EoL) options, were described. The most energy-intensive stage in the life cycle of PLA is its conversion. By optimizing the conversion process of PLA, it is possible to make it a low-carbon material with less dependence on energy sources.

This investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m²) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

The enhanced carbon footprint of the construction sector has created the need for CO₂ emission control and mitigation. CO₂ emissions in the construction sector are influenced by a variety of factors, including raw material preparation, cement production, and, most notably, the construction process. Thus, using biobased constituents in cement could reduce CO₂ emissions. However, biobased constituents can degrade and have a negative impact on cement performance. Recently, carbonised biomass known as biochar has been found to be an effective partial replacement for cement. Various studies have reported improved mechanical strength and thermal properties with the inclusion of biochar in concrete. To comprehend the properties of biochar-added cementitious materials, the properties of biochar and their effect on concrete need to be examined. This review provides a critical examination of the mechanical and thermal properties of biochar and biochar-added cementitious materials. The study also covers biochar’s life cycle assessment and economic benefits. Overall, the purpose of this review article is to provide a means for researchers in the relevant field to gain a deeper understanding of the innate properties of biochar imparted into biochar-added cementitious materials for property enhancement and reduction of CO₂ emissions.

Composites can be divided into three groups based on their matrix materials, namely polymer, metal and ceramic. Composite materials fail due to micro cracks. Repairing is complex and almost impossible if cracks appear on the surface and interior, which minimizes reliability and material life. In order to save the material from failure and prolong its lifetime without compromising mechanical properties, self-healing is one of the emerging and best techniques. The studies to address the advantages and challenges of self-healing properties of different matrix materials are very limited; however, this review addresses all three different groups of composites. Self-healing composites are fabricated to heal cracks, prevent any obstructed failure, and improve the lifetime of structures. They can self-diagnose their structure after being affected by external forces and repair damages and cracks to a certain degree. This review aims to provide information on the recent developments and prospects of self-healing composites and their applications in various fields such as aerospace, automobiles etc. Fabrication and characterization techniques as well as intrinsic and extrinsic self-healing techniques are discussed based on the latest achievements, including microcapsule embedment, fibers embedment, and vascular networks self-healing.