XIXi 'AN 710071 Xi 'AN Key Laboratory Of Computational Imaging
Xi 'AN 710071 Xi 'AN Key Laboratory Of Computational Imaging
+2
The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》,当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊,刊载内容突破了文摘的限制,正式成为学术刊物。
To tackle the drawbacks of small effective area and limited incident angle in conventional Fabry–Pérot (F-P) etalons, this paper presents a high-utilization laser frequency-selective ultra-narrow band F-P filter module, along with systematic investigations into its operating principle, simulation, design, and verification. A simulation model with a central wavelength of 532.20 nm (±0.1 nm) and a free spectral range of 300 pm is developed, and a prototype filter is fabricated accordingly. The prototype exhibits a transmission peak linewidth better than 0.037 nm and a peak transmittance over 68%, matching well with the simulation. Simulations also reveal symmetric high-transmittance peaks at ±2.9° with stable frequency selection performance. On this basis, an integrated module is proposed using field-of-view angle conversion and optical path multiplexing. Under combined incidence at 0° and ±2.9°, the module achieves 1.67 times the energy of single-angle incidence while satisfying wavelength and bandwidth requirements. The proposed structure breaks through the conventional normal-incidence restriction and offers a novel approach for high-efficiency, multi-angle multiplexing applications of F-P etalons in precision optical systems.
The rapid development of quantum technology and single-photon LiDAR places ever-increasing demands on detection systems in terms of bandwidth suppression, wavelength stability, and transmission accuracy. Conventional narrowband filters, however, are falling short in sub-nanometer bandwidth control and high-temperature stability, thereby failing to support high-precision measurements. Consequently, ultra-narrowband optical filters have emerged as a key approach to overcoming these performance bottlenecks. This paper focuses on the core technologies involved in the development of such filters. In the design phase, multiparameter optimization based on a Fabry–Perot (F-P) etalon translates application requirements into fabrication parameters. For substrate fabrication, a sequential process of computer numerical control (CNC) milling, lapping, chemical–mechanical polishing (CMP), and ion-beam polishing, followed by atomic layer deposition (ALD) step formation and ion-beam evaporation coating, is employed to achieve a nanometer-level surface figure and roughness. Temperature control is achieved via a dual-tank hybrid circulation system, maintaining stability within ±0.1 °C. Test results show that the fabricated filter exhibits a full width at a half maximum (FWHM) of 30–60 pm, a free spectral range (FSR) of 260 ± 5 pm, a temperature stability of ≤3 pm/°C, and a peak transmittance of ≥80%. These results preliminarily confirm the device’s excellent overall performance.