Graphitic carbon nitride (g-C3N4) has been widely studied as a photocatalyst for the splitting of water to produce hydrogen. In order to solve the problems of limited number of active sites and serious recombination rate of charge-carriers, noble metals are needed as cocatalysts. Here, we selectively anchored Pt nanoparticles (NPs) to specific nitrogen species on the surface of g-C3N4 via heat treatment in argon–hydrogen gas mixture, thus achieving g-C3N4 photocatalyst anchored by highly dispersed homogeneous Pt NPs with the co-existed metallic Pt0 and Pt2+ species. The synergistic effect of highly dispersed metallic Pt0 and Pt2+ species makes the catalyst exhibit excellent photocatalytic performance. Under the full-spectrum solar light irradiation, the photocatalytic hydrogen production rate of the photocatalyst is up to 18.67 mmol·g−1·h−1, which is 5.1 times of the catalyst prepared by non-selective deposition of Pt NPs.
To tackle the drawbacks of small effective area and limited incident angle in conventional Fabry–Pérot (F-P) etalons, this paper presents a high-utilization laser frequency-selective ultra-narrow band F-P filter module, along with systematic investigations into its operating principle, simulation, design, and verification. A simulation model with a central wavelength of 532.20 nm (±0.1 nm) and a free spectral range of 300 pm is developed, and a prototype filter is fabricated accordingly. The prototype exhibits a transmission peak linewidth better than 0.037 nm and a peak transmittance over 68%, matching well with the simulation. Simulations also reveal symmetric high-transmittance peaks at ±2.9° with stable frequency selection performance. On this basis, an integrated module is proposed using field-of-view angle conversion and optical path multiplexing. Under combined incidence at 0° and ±2.9°, the module achieves 1.67 times the energy of single-angle incidence while satisfying wavelength and bandwidth requirements. The proposed structure breaks through the conventional normal-incidence restriction and offers a novel approach for high-efficiency, multi-angle multiplexing applications of F-P etalons in precision optical systems.
The rapid development of quantum technology and single-photon LiDAR places ever-increasing demands on detection systems in terms of bandwidth suppression, wavelength stability, and transmission accuracy. Conventional narrowband filters, however, are falling short in sub-nanometer bandwidth control and high-temperature stability, thereby failing to support high-precision measurements. Consequently, ultra-narrowband optical filters have emerged as a key approach to overcoming these performance bottlenecks. This paper focuses on the core technologies involved in the development of such filters. In the design phase, multiparameter optimization based on a Fabry–Perot (F-P) etalon translates application requirements into fabrication parameters. For substrate fabrication, a sequential process of computer numerical control (CNC) milling, lapping, chemical–mechanical polishing (CMP), and ion-beam polishing, followed by atomic layer deposition (ALD) step formation and ion-beam evaporation coating, is employed to achieve a nanometer-level surface figure and roughness. Temperature control is achieved via a dual-tank hybrid circulation system, maintaining stability within ±0.1 °C. Test results show that the fabricated filter exhibits a full width at a half maximum (FWHM) of 30–60 pm, a free spectral range (FSR) of 260 ± 5 pm, a temperature stability of ≤3 pm/°C, and a peak transmittance of ≥80%. These results preliminarily confirm the device’s excellent overall performance.