A kind of nonresonance shaking beam motors is proposed with the advantages of simple structure, easy processing, and low cost due to its wide application prospects in precision positioning technology and precision instruments. The normal vibration model between the stator and slider is divided into contact and noncontact types to investigate the nonresonance friction drive principle for this motor. The microscopic kinematics model for stator protruding section and the interface friction model for motor systems during both operating stages are established. Accordingly, the trajectory of the stator protruding section consists of two different elliptical motions, which differ from those of resonance-type motors. The output characteristic of the nonresonance shaking beam motor is proposed under steady working conditions with reference to the research method of standing-wave-type ultrasonic motors. Numerical analysis is used to simulate the normal vibration and mechanical output characteristics of the motor. Experimental and theoretical data fitting validates the numerical analysis results and allows the future optimization of nonresonance-type motors.
Driving foot as the energy transfer mechanism in linear piezoelectric motor and the mechanical output characteristics has an important role in linear piezoelectric motor’s output. In order to improve the driving foot structure design method, the equivalent stress, deformation and modal of the driving foot structure are simulated and analyzed based on the ANSYS Workbench, and the amplification factor of driving foot is optimized. After optimizing the magnification of driving foot is 7.6, the maximum equivalent stress is 86MPa and the first-order natural frequency is 7119Hz.