Seawater aging-dominated delamination failure is a critical design parameter for marine composites. Modification of matrix with nanosized reinforcements of fiber-reinforced polymer composites comes forward as an effective way to improve the delamination resistance of marine composites. In this study, we aimed to investigate experimentally the effect of halloysite nanotube nanoreinforcements on the fracture performance of artificial seawater aged basalt–epoxy composites. For this, we introduced various amounts of halloysite nanotubes into the epoxy and the halloysite nanotube–epoxy mixtures were used to impregnate to basalt fabrics via vacuum-assisted resin transfer molding, subsequently. Fracture performances of the halloysite nanotubes modified epoxy and basalt/epoxy composite laminated were evaluated separately. Single edge notched tensile tests were conducted on halloysite nanotube modified epoxy nanocomposites and the average stress intensity factor (KIC) was increased from 1.65 to 2.36 MPa.m1/2 (by 43%) with the incorporation of 2 wt % halloysite nanotubes. The interlaminar shear strength and Mode-I interlaminar fracture toughness (GIC) of basalt–epoxy hybrid composites were enhanced from 36.1 to 42.9 MPa and from 1.22 to 1.44 kJ/m2, respectively. Moreover, the hybrid composites exhibited improved seawater aging performance by almost 52% and 34% in interlaminar shear strength and GIC values compared to the neat basalt-epoxy composites after conditioning in seawater for six months, respectively. We proposed a model to represent fracture behavior of the seawater aged hybrid composite based on scanning electron microscopy and infrared spectroscopy analyses.
The reinforcements of nanoparticles have an important role in improving the machinability of nanocomposite materials. Except for the known nanoparticles such as carbon nanotube, graphene, nanoclay, etc., the effect of boron nitride reinforcement on the machinability of composite materials are a recent research topic. In this study, boron nitride nanoparticle was introduced to the matrix resin that brings about additional strength and enhancement in thermal and mechanical properties of the composite. Though it was confirmed that this composition enhances the focused properties, it is necessary to investigate drilling performance of these composite and identify the effects of this boron nitride nanoparticle on machinability of carbon fiber epoxy nanocomposite considering thrust force, delamination factor, etc. Accordingly, while the thrust force is increased by reinforcement of the boron nitride nanoparticles, on the contrary of literature, delamination factor is tend to reduce as compared with reference composite. This experimental study shows the addition of boron nitride nanoparticles help to reduce delamination factor of carbon fiber epoxy nanocomposite. In addition, hole surfaces and drilling mechanism analyzed with optical and scanning electron microscope about damage estimation.