In this paper, the discrete phase model (DPM) was introduced to study the fuel injector cavitations process and the macro spray characteristic of three different types of nozzle spray shape with diesel and hybrid biofuel blend for several injection pressures and backpressures. The three types of nozzle spray shapes used were circle, elliptical A type, and elliptical B type. The cavitations’ flows inside the injector nozzles were simulated with Computer Fluid Dynamics (CFD) simulations using the cavitations mixture approach. The effect of nozzle spray shape towards the spray characteristic of hybrid biofuel blends is analyzed and compared with the standard diesel. Furthermore, a verification and validation from both the experimental results and numerical results are also presented. The nozzle flow simulation results indicated that the fuel type did not affect the cavitation area vastly, but were more dependent on the nozzle spray shape. In addition, the spray width of the elliptical nozzle shape was higher as compared to the circular spray. Moreover, as the backpressure increased, the spray width downstream increased as well. The spray tip penetration for the elliptical nozzle shape was shorter than the circular nozzle shape due to circular nozzles having smaller nozzle widths and lesser spray cone angles. Thus, this resulted in smaller aerodynamic drag.

Torrefaction process of biomass material is essential in converting them into biofuel with improved calorific value and physical strength. However, the production of torrefied biomass is loose, powdery, and nonuniform. One method of upgrading this material to improve their handling and combustion properties is by densification into briquettes of higher density than the original bulk density of the material. The effects of critical parameters of briquetting process that includes the type of biomass material used for torrefaction and briquetting, densification temperature, and composition of binder for torrefied biomass are studied and characterized. Starch is used as a binder in the study. The results showed that the briquette of torrefied rubber seed kernel (RSK) is better than torrefied palm oil shell (POS) in both calorific value and compressive strength. The best quality of briquettes is yielded from torrefied RSK at the ambient temperature of briquetting process with the composition of 60% water and 5% binder. The maximum compressive load for the briquettes of torrefied RSK is 141 N and the calorific value is 16 MJ/kg. Based on the economic evaluation analysis, the return of investment (ROI) for the mass production of both RSK and POS briquettes is estimated in 2-year period and the annual profit after payback was approximately 107,428.6 USD.

Diesel engines are one of the most popular reciprocating engines on the market today owing to their great thermal efficiency and dependability in energy conversion. Growing concerns about the depletion of fossil resources, fluctuating prices in the market, and environmental issues have prompted the search for renewable fuels with higher efficiencies compared with conventional fuels. Fuel derived from vegetable oils and animal fats has comparable characteristics to diesel fuel, but is renewable, despite being manufactured from various feedstocks. Nevertheless, the direct use of these fuels is strictly prohibited because it will result in many issues in the engine, affecting engine performance and durability, as well as emissions. To make biofuels as efficient as fossil fuels, it is essential to alter their characteristics. The use of emulsification techniques to obtain emulsified biofuels is one of the many ways to modify the fuel characteristics. Emulsification techniques allow for a decrease in viscosity and an increase in atomisation during injection. To date, emulsification techniques have been studied less thoroughly for use with vegetable oils and animal fats. This article will discuss the preparation and characterisation of emulsified biofuels made from vegetable oils and animal fats. This current paper reviewed research studies carried out on different emulsification techniques for biofuels used in diesel engines.

Biomass is the organic matter formed by photosynthesis that occurs on the earth’s surface. They contain all forms of waste compost, including urban solid waste, municipal bio solids, animal wastes, forestry and agricultural wastes, and some industrial wastes. Efficient use of biomass oil would aid in the resolution of issues caused by fossil fuels. However, the biggest issue about using this energy is due to the gas composition of biomass material. As a result, properties of biomass are the critical parameter for assessing the fuel content of a special biomass substance in energetic applications. Gasification is the most mature thermo-chemical conversion technique available among the various methods of transforming biomass materials to bio resources. In this context, proximate and ultimate analysis has been used to classify two groups of biomass material that carry out in this experiment. The proximate analysis results have been obtained by the TGA technique while the ultimate analysis results will obtain by the GC mechanism. Then, based on the proximate analysis data various empirical equations containing linear and nonlinear terms were evaluated in order to predict the higher heating values (HHV) of the entire sample range. Since, the biomasses used in this analysis have different properties and fuel characteristics, the estimated HHV for the wood pellet sample are between 15.33 and 19.71 MJ/kg, while the rubber seed sample is between 15.18 and 18.64 MJ/kg. According to the experimental findings, the HHV of wood pellet is at around 2.95 MJ/Nm3 while the HHV of rubber seed of about 4.99MJ/Nm3. The comparison on the theoretical analysis have been show 0.19% compared to the results on wood pellet while the rubber seed have at around 2.07% difference compare each other. The experimental results on wood pellets, the findings reveal a 15.35% difference, while rubber seed indicates a 13.81% difference. Nonetheless, the finding and analysis on the properties, the results can be considered within reasonable limits.

To reduce the economic impact caused by the fossil fuel crisis and avoid relying on existing biofuels, it is important to seek locally available and renewable biofuel throughout the year. In the present work, a new light biofuel—Melaleuca Cajuputi oil (MCO)—was introduced to blend with refined palm oil (RPO). The physicochemical properties, combustion characteristics, engine performance, and exhaust emissions were comprehensively examined. It was found that the higher the percentage of MCO, the lower the viscosity and density of the blends obtained. Calorific value (CV) was increased with the increase of MCO fraction in the blend. Regression analysis has suggested that the blend of 32% (v/v) of RPO and 68% (v/v) of MCO (RPO32MCO68) is optimal to obtain viscosity and density in accordance with ASTM 6751/EN 14214 standards. The experimental results show that the in-cylinder pressure, brake torque, and brake power of the optimal blend were slightly lower than those of baseline diesel fuel. Brake specific fuel consumption (BSFC), carbon monoxide (CO), and unburnt hydrocarbon (HC) were found to be slightly higher compared to diesel fuel. Notably, nitrogen oxides (NO_x) and smoke opacity were found to be decreased over the entire range of the test. Overall, the optimal blend of RPO32MCO68 has shown a decent result which marks it as a potential viable source of biofuel.

Among the alternative fuels, vegetable oil is seen as a potential source of energy due to its readily available variety of sources and its certain physical properties that are comparable to those of diesel fuels. However, higher contents of triglyceride in vegetable oil contribute to higher viscosity and density that is affecting the inferior engine performance and emissions. The key properties, such as viscosity, density, and calorific value (CV), have a significant effect on fuel atomization, fuel combustion, and exhaust emissions. In this study, refined palm oil (RPO) was blended with a newly introduced novel biofuel, Melaleuca cajuputi oil (MCO), in order to reduce the viscosity and density and enhance blend properties. This blend is analyzed and compared with RPO–diesel and RPO–ethanol blends in terms of viscosity, CV, and density. These hybrid binary biofuel (HBB) blends were prepared on the volumetric basis of 10%, 20%, 30%, and 50% of MCO, ethanol, and diesel with RPO. The basic fuel properties and the correlation of temperature–viscosity–blend ratio were analyzed. The results showed that the MCO has comparable key properties to those of diesel fuels. The viscosity and density of HBB decrease as the fraction of MCO/ethanol/diesel increases in the blend. The higher the fraction of MCO/diesel in the blend, the higher is the CV observed. Notably, the viscosity of neat RPO and its blends is strongly influenced by temperature variations. The combination of blend technique and preheating had a substantial effect in reducing the viscosity and density of the HBB. Remarkably, the blend of MCO–RPO has the potential to highly considered as a new source of biofuel.