Due to long-term burial underground, oil and gas pipelines are susceptible to external surface corrosion influenced by time and soil conditions, which can lead to leakage and burst failures. Pipeline failure not only results in significant economic losses but also has catastrophic impacts on human safety and the environment. Therefore, modeling and analyzing the corrosion failure of these pipelines is of critical practical importance to ensure their safe operation during service. Addressing the insufficient research on correlation effects in current reliability evaluations of corroded pipelines, this paper proposes a calculation method for the failure probability of corroded oil and gas pipelines that considers the influence of two-layer correlations. Taking a specific segment of the Shaanxi–Beijing pipeline as a case study, the Monte Carlo sampling algorithm is employed to calculate the impact of two-layer correlations and the quantity of defect on the pipeline’s failure probability. Furthermore, a sensitivity analysis of the correlation coefficients is conducted. The results indicate that the influence of defect correlation on pipeline failure probability is significantly more pronounced than that of random variable correlation. The probabilities of pinhole leakage and burst failure decrease as the correlation coefficient between defects increases, while they increase with the number of defects. Random variable correlation exhibits no impact on pinhole leakage probability; however, the burst failure probability decreases with an increasing correlation coefficient between wall thickness and pipe diameter, but increases as the correlation between initial defect length and depth grows. Furthermore, the correlation coefficient between axial and radial defect growth rates exerts a bidirectional effect on burst failure probability: during the first 25 years of the prediction period, the failure probability increases with the correlation coefficient, whereas it subsequently decreases after approximately 25 years. These findings are applicable to the reliability evaluation of oil and gas pipelines containing multiple corrosion defects, providing valuable technical references for ensuring safe operation and the steady supply of energy resources.
This paper investigates the mechanical transfer mechanism of bimetallic composite pipes used in highly sour gas fields located in high-steep mountainous areas. It systematically analyzes the mechanical response behavior of these pipes under the coupled effects of complex geological conditions and operational loads. By establishing and validating a finite element model that accounts for material nonlinearity and pipe–soil interaction, the study examines the influence of key factors—including internal pressure, landslide displacement, and base pipe wall thickness—on the stress distribution and transfer mechanism within the pipeline. The results demonstrate that increased internal pressure significantly elevates both circumferential and axial stresses: when internal pressure increases from 7 MPa to 9 MPa, the liner hoop stress increases by 35.5% and the base pipe axial stress increases by 27.5%. When landslide displacement exceeds a critical threshold of 3 m, the stress in the base pipe rises sharply, with axial stress increasing by 39.7% when displacement increases from 3 m to 5 m; conversely, increasing the base pipe wall thickness from 12 mm to 15 mm effectively reduces the overall stress level, decreasing base pipe axial stress by 40.4% and liner axial stress by 86.9%. Stress transfer exhibits a dual-path characteristic, which can be described as “bidirectional transfer induced by internal pressure” and “progressive transfer caused by landslide”. These quantitative findings provide a theoretical basis for the safe design and operation of bimetallic composite pipes in high-steep mountainous regions.
Accurate reliability assessment of pipeline units remains challenging due to complex degradation processes and multiple sources of uncertainty. To address this issue, this paper proposes a dynamic reliability assessment model that integrates historical failure data with mechanistic principles. To overcome the computational bottleneck of conventional reliability models in handling high-dimensional complex integrals, Bayesian theory is adopted. The prior distribution, derived from expert knowledge or general empirical laws, is rigorously coupled with the likelihood function of historical failure data to construct a hierarchical parameter inference framework. For accurate parameter estimation, Markov Chain Monte Carlo (MCMC) simulation is carried out within the OpenBUGS environment, and the Brooks–Gelman–Rubin (BGR) diagnostic criterion is employed to ensure convergence and statistical validity of the computed results. The case study indicates that the integration of historical failure data effectively adjusts the expected failure time (μ) and the degree of dispersion (σ), substantially narrows the 95% confidence intervals, and reduces prediction uncertainty. The updated failure probability curve shows a clear leftward shift relative to the theoretical prediction. Based on these findings, it is recommended that the key maintenance phase be advanced from the 15th year to the 12th year, thereby achieving an optimal balance between operational safety and cost-effectiveness.
Addressing the ill-defined interlayer stress transfer mechanisms and the risk of stress exceeding material limits in bimetallic composite pipes under landslide hazards in high-steep mountainous regions, this study establishes a refined pipe–soil interaction finite element (FE) framework. Built upon a previously validated coupled model, interlayer interfacial contact formulations were enhanced, and valid operating regimes were systematically screened using the ultimate tensile strength (UTS) as the structural failure criterion. The regulatory impacts of soil displacement, internal operating pressure, and base pipe wall thickness on interlayer stress transfer efficiency were quantitatively mapped. The results demonstrate that within the valid service window, the interlayer stress transfer coefficient continuously escalates with soil displacement, identifying 3 m as the critical displacement threshold for base pipe yielding. Elevating internal pressure increases the stress transfer coefficient, which is mainly dominated by the high sensitivity of the thin liner’s membrane stress to internal pressure, and is secondarily promoted by the enhancement of interfacial shear capacity caused by increased contact pressure. Crucially, increasing the base pipe wall thickness from 12 mm to 15 mm effectively reduces the peak stress of the base pipe from 440.5 MPa to 310.2 MPa within the safe operational regime (1 m displacement) while systematically lowering the interlayer stress transfer coefficient η from 0.84 to 0.78 at the 3 m critical yielding threshold. This structural shielding effect is fundamentally driven by the enhanced structural stiffness (flexural rigidity) of the outer base pipe, which directly absorbs the primary geotechnical bending load and consequently lowers the deformation demand transmitted across the interface. Ultimately, this work unveils the core interlayer transfer mechanism characterized by “base-pipe stiffness dominance, interfacial shear transmission, elastic modulus mismatch governing stress allocation, and deformation compatibility steering load pathways,” providing a robust theoretical foundation for the interfacial integrity design of bimetallic composite pipelines in landslide-prone mountainous environments.