A new adsorbent consisting of fumed, mixed alumina, silica, and titania in various proportions (AST 50) was investigated. The studied material was prepared by chemical vapor deposition method. The diameter of AST 50 primary particles was equal to about 51 nm which denotes that it can be classified as a nanomaterial. In the presented paper, the adsorption properties of polyvinyl alcohol on the ternary oxide were investigated. The polymer macromolecules were characterized by two different molecular weights and degree of hydrolysis. The polymer adsorption reaches the maximum at pH 3 and decreases with the solution pH rise. The reduction of the adsorbed PVA macromolecules is related to the electrostatic repulsion forces occurring in the studied system. The AST 50 point of zero charge (pH_pzc) obtained from the potentiometric titration is equal to 4.7. Due to the nonionic character of the analyzed macromolecular compound, the polymer attendance has an insignificant effect on the AST 50 surface charge density. In the case of the adsorbent particles zeta potential, the obtained dependencies are different in the absence and presence of PVA. The shift of the slipping plane and displacement of the counter-ions from Stern layer by the adsorbed polymer chains have the greatest effect on the ζ potential value. The stability measurements indicate that the AST 50 suspensions in the presence of the background electrolyte at pH 3 and 6 are unstable. In turn, in an alkaline medium the mixed oxide suspensions exhibit the highest durability, which is a result of a large number of the negative charges on the AST 50 surface. The addition of PVA 100 significantly improves the suspension stability at pH 3 and 6; at higher pH value, the polymer presence does not influence the system durability. It is related to the steric and electrosteric stabilization of the colloidal particles by the adsorbed polyvinyl alcohol macromolecules.

The adsorption, electrokinetic, thermal and stability properties of the silicon dioxide (silica, SiO₂)/bovine serum albumin (BSA) system were determined. All measurements were carried out as a function of solution pH value. The highest amount of BSA absorbed on the silica surface was observed at pH 4.6 [the value close to the BSA isoelectric point (pI)], which is primarily related to the packed albumin conformation and the lack of adsorbent–adsorbate electrostatic repulsion. At pH 4.6, largest mass decrease was also noticed (thermogravimetric measurements). At pH 3, 7.6 and 9, the adsorption levels were much lower. This phenomenon is associated with the electrostatic repulsion between the BSA macromolecules and the silica particles as well as the expanded BSA structure. During biopolymer adsorption, the whole solid surface is coated with the albumin macromolecules. Then, the properties of the silica particles become similar to those of the BSA macromolecules. In the presence of albumin, the silica pH_iep point is identical to the BSA pI value. It should also be noted that the albumin adsorption affects the SiO₂ suspension stability. The greatest change was observed at pH 3. Under these conditions, the BSA addition causes electrosteric system stabilization.

Pure zeolite (Na-X) and a zeolite–carbon composite (Na-X(C)) were investigated as adsorbents of heavy metals—Pb²⁺ and Zn²⁺ from an aqueous solution. These materials were synthesized from fly ash—a waste from conventional hard coal combustion. Both solids were characterized using XRD, SEM-EDS, nitrogen adsorption/desorption, particle size and elemental composition analyses. The adsorption study was performed at pH 5 in the systems containing one or two adsorbates simultaneously. The obtained results showed that the pure zeolite was characterized by a more developed surface area (728 m²/g) than its carbon composite (272 m²/g), and the mean pore diameters were equal to 1.73 and 2.56 nm, respectively. The pure Na-X zeolite showed better adsorption properties towards heavy metals than its Na-X(C) composite, and Zn²⁺ adsorbed amounts were significantly higher than the Pb²⁺ ones (the highest experimental adsorption levels were: for Zn²⁺—656 and 600 mg/g, and for Pb²⁺—575 and 314 mg/g, on the Na-X and Na-X(C) surfaces, respectively). The zinc ions are exchanged with the cations inside the zeolite materials structure more effectively than lead ions with a considerably larger size. In the mixed systems, the competition between both heavy metals for access to the active sites on the adsorbent surface leads to the noticeable reduction in their adsorbed amounts. Moreover, the hydrochloric acid was a better desorbing agent for both heavy metals, especially Pb²⁺ one (desorption reached 78%), than sodium base (maximal desorption 25%).