Passive components in integrated circuits occupy significant areas and increase production costs, driving the demand for compact alternatives. This study presents a generalized, electronically controllable positive/negative floating impedance multiplier implemented in TSMC 180 nm CMOS technology. To achieve a compact layout, the architecture utilizes custom-designed operational transconductance amplifiers (OTAs). The circuit operates on a lossless principle, scaling resistance, capacitance, and inductance values within a wide multiplication range of −100 to +100 using only a single base element. Comprehensive LTspice simulations including PVT, Monte Carlo, THD, and noise analyses verify the design’s stable operation, low distortion, and favorable noise characteristics across various filter configurations. Furthermore, practical feasibility is validated through SPICE simulations using commercial LM13700 OTA, confirming consistent behavior for real-world applications. The proposed active topology occupies a compact core area of only 5831 μm2. By scaling down large passive components, this design decreases the overall system-level footprint, providing a versatile and area-efficient solution for tunable analog IC applications. It should be noted that the reported 5831 μm2 corresponds to the active core only, while the effective system-level area benefit depends on the selected base impedance and the target application.
The physical condition of insulators on electrical transmission lines is critical for system reliability. Early fault detection such as broken discs or flashovers prevents outages and accidents. Traditional inspection methods are costly and difficult, driving demand for UAV-based autonomous systems. This article proposes a novel dataset enhancement method and a cascade deep learning model for detecting and classifying insulator disc conditions. Existing datasets were enriched by approximately 30% with wide-background, real-field images to improve model generalization. After comparative analyses, YOLO was selected for detection due to superior performance, while MobileNetV2 was chosen as the classifier for its processing speed advantage. CBAM attention module and Focal Loss function were integrated to boost classification performance and handle class imbalance. The resulting YOLO + MobileNetV2 model achieved 99.76% overall accuracy across “Normal”, “Broken”, and “Flashover” classes, with an F1-score of 0.99 for broken discs, operating with 185.60 ms latency, confirming its viability for real-time inspection.
This study presents an integrated simulation–machine learning framework for predicting bio-oil yield and hydrogen production from biomass in a fast pyrolysis–sorption enhanced reforming system.From an artificial intelligence perspective, supervised machine learning models, including Decision Tree, Random Forest, and Gradient Boosting, are developed to accurately predict process outputs based on simulation-derived data.From an engineering application perspective, an Aspen Plus model is constructed to represent the coupled fast pyrolysis and sorption-enhanced reforming (SER) process, where in-situ CO₂ capture via CaO improves hydrogen yield and purity. The model is validated using literature data for both bio-oil production and hydrogen generation.A comprehensive dataset is generated by combining the compositional properties of 48 biomass feedstocks with key operating parameters, including pyrolysis temperature, SER temperature, and CaO/bio-oil ratio, resulting in 1296 simulation cases.Among the developed models, Gradient Boosting achieved the highest predictive accuracy for bio-oil yield (RMSE: 0.0129, R²: 0.982), while tree-based models provided highly accurate predictions for hydrogen mole fraction (RMSE: 2.208, R²: 0.9938).Feature importance analysis using SHapley Additive exPlanations (SHAP) indicates that pyrolysis temperature is the dominant factor influencing bio-oil yield, whereas SER temperature and CaO/bio-oil ratio are the most influential parameters for hydrogen production. Residual analysis further confirms the robustness and stability of the proposed models.Overall, the proposed framework provides a scalable, interpretable, and data-driven approach for the prediction and optimization of hydrogen production in integrated biomass conversion systems.
The current study investigates hydrogen-rich syngas production from polyethylene (PE), polypropylene (PP), garden waste (GW), and their co-gasification blends using Aspen Plus simulations. A thermodynamic equilibrium model based on Gibbs free-energy minimization was developed and validated using experimental data reported in the literature. The developed model can assess how gasification temperature and equivalence ratio (ER) affect syngas composition and H2 mole fraction. Validation results demonstrated acceptable agreement with experimental data, yielding root mean square error (RMSE) values of 2.25, 4.38, and 4.75 for PE, PP, and GW gasification, respectively. The results showed that increasing temperature enhanced the H2 and CO mole fractions while reducing the CO2 and CH4 mole fractions. Among the individual feedstocks, GW exhibited the highest H2 mole fraction, reaching 0.250 at 750 °C. Among the co-gasification blends, the maximum H2 mole fractions were 0.208 for the polypropylene–garden waste (PP + GW) blend, 0.2205 for the polyethylene–garden waste (PE + GW) blend, and 0.222 for the polypropylene–polyethylene–garden waste (PP + PE + GW) blend. The ternary PP + PE + GW blend therefore exhibited the highest H2 mole fraction among the blended systems under the temperature analysis. The ER analysis showed maximum H2 mole fractions of 0.218 for PP + GW at an ER of 0.27, 0.212 for PE + GW at an ER of 0.28, and 0.211 for PP + PE + GW at an ER of 0.28. The findings demonstrate that plastic–biomass co-gasification provides favorable syngas characteristics and enables the utilization of mixed waste resources for hydrogen-rich syngas production. Overall, the developed Aspen Plus model provides a reliable tool for evaluating plastic–biomass co-gasification systems and supports the utilization of mixed waste resources for H2 mole fractions and waste-to-energy applications.