Studies on new passive elements with memory properties such as memristor, meminductor, and memcapacitor have increased recently. In this article, an operational transconductance amplifier (OTA) based meminductor simulator circuit without using a memristor, which is suitable for the physically produced memristor structure, has charge control, floating structure, and characteristics can be controlled electronically, is proposed. The OTA IC used is based on 0.18μm CMOS technology. The meminductor emulator circuit works in high-frequency regions and has low power consumption. Furthermore, the meminductor emulator circuit can be operated both as a decreasing model and an increasing model. Temperature, Monte-Carlo and worst-case analyzes are performed to verify the robustness of the proposed circuit. In this study, a chaotic circuit is designed by taking advantage of the nonlinearity of the proposed meminductor circuit. In addition, a neuromorphic circuit application has been carried out to demonstrate the memory ability of the proposed meminductor circuit. The electronic tunability of the proposed meminductor circuit in both chaotic and neuromorphic applications are demonstrated. The electronic simulations of the applications realized with the proposed meminductor emulator circuit, which are obtained by using the LTspice program.
27 February 2026 in International Journal of Circuit Theory and Applications
The physical condition of insulators on electrical transmission lines is critical for system reliability. Early fault detection such as broken discs or flashovers prevents outages and accidents. Traditional inspection methods are costly and difficult, driving demand for UAV-based autonomous systems. This article proposes a novel dataset enhancement method and a cascade deep learning model for detecting and classifying insulator disc conditions. Existing datasets were enriched by approximately 30% with wide-background, real-field images to improve model generalization. After comparative analyses, YOLO was selected for detection due to superior performance, while MobileNetV2 was chosen as the classifier for its processing speed advantage. CBAM attention module and Focal Loss function were integrated to boost classification performance and handle class imbalance. The resulting YOLO + MobileNetV2 model achieved 99.76% overall accuracy across “Normal”, “Broken”, and “Flashover” classes, with an F1-score of 0.99 for broken discs, operating with 185.60 ms latency, confirming its viability for real-time inspection.
Passive components in integrated circuits occupy significant areas and increase production costs, driving the demand for compact alternatives. This study presents a generalized, electronically controllable positive/negative floating impedance multiplier implemented in TSMC 180 nm CMOS technology. To achieve a compact layout, the architecture utilizes custom-designed operational transconductance amplifiers (OTAs). The circuit operates on a lossless principle, scaling resistance, capacitance, and inductance values within a wide multiplication range of −100 to +100 using only a single base element. Comprehensive LTspice simulations including PVT, Monte Carlo, THD, and noise analyses verify the design’s stable operation, low distortion, and favorable noise characteristics across various filter configurations. Furthermore, practical feasibility is validated through SPICE simulations using commercial LM13700 OTA, confirming consistent behavior for real-world applications. The proposed active topology occupies a compact core area of only 5831 μm2. By scaling down large passive components, this design decreases the overall system-level footprint, providing a versatile and area-efficient solution for tunable analog IC applications. It should be noted that the reported 5831 μm2 corresponds to the active core only, while the effective system-level area benefit depends on the selected base impedance and the target application.