A combined pretreatment strategy involving alkaline chemical polishing and silane electrodeposition was proposed for regulating the surface state of aluminum foil and the formation of etched tunnels during DC tunnel etching. Electrochemical measurements and morphological characterization were used to evaluate the effects of this pretreatment on surface electrochemical activity and etched tunnel structure. The results showed that appropriate alkaline chemical polishing facilitated the removal of rolling-induced surface relief, improved the uniformity of surface electrochemical activity, and favored the uniform deposition of the silane film. In contrast, excessive polishing generated surface pits during the polishing process, and these preformed pits subsequently promoted tunnel merging during DC tunnel etching. Under the optimal processing conditions, the combined pretreatment significantly improved the distribution uniformity and dimensional consistency of etched tunnels and suppressed tunnel merging. Under the present testing conditions, the specific capacitance increased from 0.386 to 0.509 μF cm−2, corresponding to an improvement of approximately 31.9%. This work provides an effective approach for optimizing etched tunnel structure and improving the capacitance-related performance of aluminum capacitor foil.
Understanding the atomic-scale formation of anodic oxide films is critical for Al electrolytic capacitors. The formation mechanism and dielectric properties of an ultra-high-voltage anodized Al foil were investigated by combining experiments, reactive molecular dynamics, and first-principles calculations. Results indicate that film growth is primarily governed by the (011) crystal plane, and the density of the oxide film increases with the applied electric field. The diffusion barrier of H atoms (0.54 eV) is significantly lower than that of O atoms (1.41 eV), suggesting the preferential formation of Al hydroxide oxide species on the surface. As the anodization voltage increases, the oxide undergoes phase evolution from AlOOH to γ-Al2O3 and finally to α-Al2O3. First-principles calculations reveal the dielectric constants of alumina, which are 7.96 for AlOOH, 21.80 for γ-Al2O3 (Paglia structure), and 10.24 for α-Al2O3. These findings provide a theoretical basis for optimizing the microstructure and dielectric performance of ultra-high-voltage anodized Al foils.