This article discusses the problems of ensuring stable and efficient operation of wind power plants under various thermal conditions. The characteristic design features of a combined blade consisting of a rotating cylinder and a fixed blade are analyzed. The necessity of studying thermophysical parameters (such as temperature, density and viscosity of air) has been identified and justified, since they significantly affect the structure of the airflow and the aerodynamic forces acting on the blade. The developed design effectively reduces turbulence while maximizing lift, thereby increasing the aerodynamic efficiency of the system. It is shown that an increase in the speed of rotation of the cylinder in combination with an increase in air temperature increases the pressure gradient around the cylinder, which leads to increased productivity. The experimental data obtained make it possible to formulate recommendations for optimizing both the geometry and operating modes of installations with combined blades, which makes it possible to obtain economical energy in various climatic conditions. Thus, the results of this study can contribute to improving operational reliability and wider adoption of wind energy technologies. Keywords: wind power plant, combined blade, rotating cylinder, lifting force, pressure distribution, air flow temperature, aerodynamic efficiency
30 June 2025 in Bulletin of Toraighyrov University. Physics & Mathematics series
Проведено исследование переработки нефтешламов в легкие и средние фракции с использованием высоковольтного короткоимпульсного электрогидравлического разряда (ВКЭГР). Актуальность работы обусловлена растущими объёмами нефтешламов, представляющих серьёзную экологическую проблему и трудности при утилизации традиционными методами. В условиях переработки нефтешламов ВКЭГР позволяет эффективно инициировать термокаталитические процессы без необходимости внешнего нагрева и длительной экспозиции. Такая технология обеспечивает высокую скорость протекания реакций, снижение энергозатрат и возможность целенаправленного влияния на фракционный состав конечного продукта. Совмещение ВКЭГР с каталитической обработкой открывает новые горизонты в области утилизации углеводородных отходов и получения товарных топливных компонентов. Изучено влияние технологических параметров и каталитических добавок на эффективность процесса. Оптимизированы условия обработки, включая расстояние между воздушными электродами, ёмкость конденсатора батареи и длительность импульсного воздействия, обеспечивающие высокий выход легкой и средней фракции. Особое внимание уделено выбору катализатора: наибольшую активность продемонстрировала добавка на основе бентонита, с соединением никеля. Данный катализатор способствовал улучшению деструкции тяжёлых компонентов нефтешлама, увеличивая выход бензиновой и дизельной фракций. Полученные результаты подтверждают перспективность метода ВКЭГР в сочетании с каталитическими добавками для глубокой переработки нефтешламов. Исследование открывает возможности для более эффективной и экологически безопасной утилизации нефтяных отходов с получением ценных углеводородных продуктов , что особенно важно в условиях ужесточения природоохранных требований. Ключевые слова: нефтешлам, электрогидравлические импульсы, бентонит, катализ, переработка, углеводородные фракции.
25 December 2019 in Eurasian Physical Technical Journal
Experiments have been carried out to study the influence of the direction of the incoming flow relative to the rotor plane on the values of the drag coefficient of a multi-blade rotor layout with power elements in the form of rotating cylinders of variable cross-section. It is shown that the drag force of the multipath depends on the Reynolds number, and practically remains constant in the range of Reynolds numbers (16-50)· 104 .According to the results of a series of experimental data, the dependences of the thrust coefficient of the multipath rotor on the Reynolds number and the installation angle of the airflow were also calculated and constructed. It is established that the coefficient of thrust of the rotor decreases with an increase in the Reynolds number. Keywords: rotor, Reynolds number, drag force coefficient, thrust force coefficient, WEUC (wind energy utilization coefficient).
30 September 2026 in Bulletin of the Karaganda University "Physics Series"
This study investigates the effect of electrohydraulic pulse treatment on changes in the physicochemical parameters of wastewater and the analytical signals of heavy metals. The relevance of the study is determined by the need to develop reagent-free methods for the advanced treatment of industrial and municipal-industrial wastewater containing organic pollutants and trace metal impurities. The treatment was carried out in a laboratory high-voltage cell with an interelectrode discharge in an aqueous medium. Wastewater from the pumping station of JSC “Qarmet” in Temirtau was used as the study object. Heavy metals were determined by stripping voltammetry, while changes in the chemical parameters were assessed based on COD, BOD₅, pH, ammonium nitrogen, phenols, petroleum products, total iron, and chromium content. After treatment, COD decreased from 95.9 to 69.0 mg/dm³, corresponding to a reduction of 28.1%. The BOD₅/COD ratio increased from 0.095 to 0.155, indicating an improvement in the biodegradability of the organic compounds. The analytical signals of Zn, Cd, Pb, and Cu decreased by 82.7–100%. The obtained results demonstrate the potential of electrohydraulic pulse treatment as a pretreatment or advanced treatment stage for complex wastewater.
30 September 2025 in Bulletin of Toraighyrov University. Physics & Mathematics series
"It is known that electrical discharge strikes can cause the formation of active free radicals, atomic oxygen and hydrogen, nitrogen compounds, and even simple amino acids in water. Air and other gases dissolved in water contribute to the realization of these processes. Based on the fact that the electrohydraulic effect is a powerful source of ultrasound, it can be assumed that ultrasound is one of the main factors influencing microorganisms. Given that the electrohydraulic effect is a powerful source of ultrasound, it can be assumed that ultrasound is one of the primary causes of the intense destruction of microorganisms. The vigorous oxidative action of atomic oxygen, which is formed during electrical discharge strikes, literally burns all organic matter present in the water. Experiments have shown that direct discharge exposure is lethal to microorganisms suspended in the liquid, and the liquid obtained after the corresponding electrohydraulic treatment acquires induced bactericidal properties that do not diminish over time. Keywords: electrical discharge treatment, electrohydraulic effect, specific electrical conductivity (SEC), salt content, TDS- meter."