Titanium is the main component of dental implants. It is also routinely used as a framework material for implant-supported full-arch prostheses due to its low density, biocompatibility, and other mechanical properties. Remarkable mechanical properties such as lesser mass density and higher young’s modulus of graphene have gained popularity among scientists, improving the properties of biomedical implants. Thus, our study aimed to compare the outcome through the von Mises stresses generated on All-on-6 and All-on-3 implant models, as well as on the framework, and evaluate the effect of stress patterns on the crestal bone around implants in the mandible. FEA (Finite Element Analysis) study was carried out using edentulous mandible models. Four 3D FEA models with 3 and 6 implants were used (Model 1: Titanium bar-supported 6 straight implants; Model 2: Graphene bar-supported 6 straight implants; Model 3: Titanium bar-supported 3 implants with 30 degrees-tilted; Model 4: Graphene bar-supported 3 implants with 30 degrees-tilted) in order to simulate endosseous implant designs. The implant measuring 4.2 mm in diameter and 11.5 mm in length were used. The most distal implants in the 3-implant models were placed with angulation of 30 degrees; in 6 implants, they were vertically placed. All the models were analyzed for vertical and oblique axis with a single force magnitude of 100 N. In all four implant models and under loading conditions, the peak stress points were always on the neck of the most distal implant. von Mises stresses were within the normal stress range. In a conventional six-straight implant model supported by a titanium framework, the cortical stress in the region of implants was 25.27 MPa, whereas, in the graphene framework, it was 12.18 MPa. Under vertical load, there was a significant difference in the cortical stress around the tilted implants (30 degrees) in the 3-implant system of titanium and graphene frameworks, respectively, 70.31 MPa and 21.27 MPa. The graphene framework demonstrated better results than the titanium framework for the conventional six-implant system under vertical load, achieving stress of 30.09 MPa and 76.60 MPa, respectively. In the case of the 3-implant system, a significant difference in the bar stress was observed between graphene and titanium, respectively, 256.32 MPa and 180.1 MPa of bar stress. Within the limitation of this study, the peri-implant stresses were decreased using graphene framework models. Hence, it was possible to conclude that the best load-bearing capacity results were found in the graphene framework group compared to the titanium framework for All-on-6 and All-on-3 implant models, even though both materials are reliable options used as framework materials in implant-supported full-arch prostheses.

Background: It is essential for practicing dentists to have adequate knowledge of HIV/AIDS and its implications in the dental practice. Their attitudes should also be up to the professional expectations. This study aimed to assess knowledge of HIV/AIDS infection and attitudes towards its patients among dental students in Saudi Arabia. Methods: A questionnaire was prepared and distributed among a sample of dental students in Saudi Arabia. Twenty questions related to knowledge, attitudes, and oral manifestation of HIV were presented. Results: A total of 405 questionnaires were completed (67% response rate). Participants showed low knowledge of safety regarding HIV (39.5%) and 44.2% indicated that they would take an HIV test after needle stick injury. The proportion of correct answers regarding transmission of HIV through saliva, cardiopulmonary resuscitation, and aerosols by hand pieces was 41%, 37.5%, and 26.4%, respectively. Almost 50% of the surveyed dental students expressed unwillingness to treat HIV-positive patients. Poor knowledge was noted regarding oral manifestations of HIV (32.7%). Of the participants, 57.8% indicated that infection control procedures are very important for the treatment of HIV patients and 50.6% believed that a dentist can make a decision to reject the treatment of HIV patients. According to the participating dental students, the three major oral manifestations in HIV patients are hairy leukoplakia (47.4%), oral candidiasis (44.7%), and Kaposi’s sarcoma (43.5%). Conclusion: Inadequate knowledge and unprofessional attitude towards HIV/AIDS patients were identified among this group of dental students in Saudi Arabia. Dental educators and health care planners in Saudi Arabia should plan to promote the knowledge and attitudes of dental students in Saudi Arabia towards the treatment of HIV patients.

BACKGROUND Surgical extraction of impacted mandibular third molars is the most commonly performed procedure in oral surgery; its associated complications include sensory nerve damage, swelling, and trismus. This study aimed to evaluate the effects of hyaluronic acid (HA) on healing of the socket following extraction of the lower impacted third molar tooth in 40 dental patients. MATERIAL AND METHODS This prospective, double-blind, randomized, controlled study was carried out on 40 adult healthy patients indicated for surgical removal of bilateral impacted mandibular third molars with equal surgical difficulty (moderate surgical difficulty according to the Koerner index. Patients with right mandibular third molars were included into the study (HA) group and those with left mandibular third molars were included into the control group. Surgical removal of impacted teeth was performed at different times for each patient for proper measurement of postoperative clinical variables, including pain, swelling, and mouth opening. RESULTS Postoperative pain evaluation results using the visual analog scale (VAS) showed reduced pain levels at all observation periods. Postoperative swelling peaked in intensity within 12-48 hours, resolving between the 5th and 7th days, and there was no significant difference in pre- and postoperative measurements of interincisal opening between both groups (P>0.05). CONCLUSIONS We found that intra-socket application of hyaluronic acid after surgical extraction of impacted mandibular third molars promoted normal wound healing, and there was a clinical benefit of reduced postoperative pain and swelling.

Dental professionals have a major role in the fight against the spread and transmission of COVID-19. This study aimed to evaluate awareness and practice of dentists in Saudi Arabia regarding COVID-19 and the utilization of infection control methods. A 24-item questionnaire was developed and distributed through social media to 627 dentists working in Saudi Arabia. 177 questionnaires were completed (28.2% response rate). Most dentists were aware about the transmission, incubation time and main clinical symptoms of COVID-19. Almost 83% of the respondents appreciate the risk of droplets, aerosols and airborne particles in transmission of COVID-19 in the dental clinic. Among the common practices of participants are measuring patient’s body temperature before undertaking a dental treatment (88.7%), cleaning the environmental surfaces at the dental clinic after each patient (91.5%) and restriction of dental treatment to emergency cases (82.5%). It seems that practicing dentists in Saudi Arabia are fairly aware about COVID-19. The practices of the surveyed dentists appear to be mostly consistent with the current guidelines and recommendations for infection control of COVID-19 in the dental clinic. Some drawbacks in knowledge and a number of inappropriate practices can be identified and require the attention of health authorities.

Placing a dental implant in the maxillary posterior region is a challenge to a dentist because of its proximity to the maxillary sinus and decreased height of bone in this region. The surgical approaches for instilling a dental implant are thus associated with complications, of which migration of the implant into pneumatized sinus can also occur. Though this type of displacement is an accidental occurrence and can occur either intra-operatively or post-operatively, but a dentist should be adequately prepared if such a situation arises. These two (02) case reports and an overview will focus on the migration of dental implants toward the maxillary sinus with its probable causes, clinical findings, diagnosis, associated complications, and management.

Purpose This study aimed to provide a comprehensive national overview of the prosthodontic workforce in Saudi Arabia, focusing on its demographic composition, educational background, geographic distribution, and workforce trends. The findings are intended to support policymakers in postgraduate education planning, and equitable access strategies to prosthodontics care. Materials and methods A retrospective cross-sectional analysis was conducted using official data obtained from the Saudi Commission for Health Specialties (SCFHS) as of May 2025. The dataset included all registered practicing prosthodontists across Saudi Arabia. Key variables included gender, nationality, professional classification, practice region, and postgraduate training background. The prosthodontist-to-population ratio was calculated based on the 2024 national census data. Descriptive statistics were used to analyze the characteristics of the prosthodontic workforce. Results A total of 1,542 prosthodontists were identified across Saudi Arabia, resulting in a national ratio of 4.37 prosthodontists per 100,000 population. The workforce was predominantly male (65.8%), with females representing 34.2%. Non-Saudis accounted for 56.5% of the workforce, while Saudis made up 43.5%. Most prosthodontists were located in major metropolitan areas, with 34.1% practicing in Riyadh, 24.6% in Makkah, and 11.8% in the Eastern Region. The most common countries of postgraduate education were Egypt (29.3%), Saudi Arabia (27.3%), India (9.0%), and the United States (7.2%). The workforce was almost evenly divided between the public sector (48.3%) and the private sector (47.8%). Conclusion Saudi Arabia has witnessed steady growth in its prosthodontics workforce, marked by increased training capacity, diverse educational backgrounds, and encouraging participation of female practitioners. Despite this progress, challenges remain in achieving balanced gender representation, equitable regional distribution, and consistency in training standards. These findings highlight the importance of thoughtful workforce planning and the need to reassess classification systems and align training pathways with internationally recognized benchmarks. Such efforts will be essential to ensure high-quality, inclusive, and sustainable prosthodontics care across all regions.