Mass-based circularity indicators, such as ISO 59020:2024, quantify material recovery as a share of total throughput but do not account for chemical composition or functional performance, as a consequence of their sector-agnostic design. In copper metallurgical systems, trace tramp elements (e.g., As, Sb, Bi, Fe, Sn, Ni) present in WEEE-derived scrap, anode slimes, and refinery residues can significantly reduce electrical conductivity. Even at nominal purities of ≥99.7 wt.% Cu, conductivity may drop to 85.0–88.0% IACS, as illustrated by selected reported cases—a level of functional degradation that remains undetected by mass-based accounting. Analysis of Grade A cathode standards (EN 1978:2022, LME Cu-CATH-1, ASTM B115-10:2021) shows that impurity limits as low as 2 ppm (Bi) constrain the achievable share of secondary feed in closed-loop recycling. For a specific flash-smelting–refinery configuration, modeling indicates that secondary feed shares above approximately 30% may lead to impurity accumulation beyond the stated specification constraints unless low-impurity primary copper is introduced. This study introduces the Quality-Adjusted Circularity Indicator (QACI), a conceptual, specification-constrained indicator framework that applies a dilution factor f_dil derived from a binary blending mass balance to adjust ISO 59020:2024 inflow-based circularity indicators using a feed-composition blending constraint anchored to Grade A specification limits. The QACI functions as a feed-composition screening indicator operating at the anode blending stage and does not represent a correction of the full electrorefining system. Parametric scenario analysis across six stylized impurity configurations shows that, at identical mass-based circularity (C_mass = 25%), the QACI ranges from 7.1% to 25.0%. This corresponds to a 1.3- to 3.5-fold difference between the mass-based and quality-adjusted indicator values under the stated feed-composition assumptions, illustrating the potential overestimation introduced when feed-quality constraints are not considered. This ratio quantifies the divergence between two indicator values under stylized conditions and should not be interpreted as a directly measured fold-difference in actual loop-closure performance. Positioned within the ISO 59020:2024 Annex C complementary method space, the QACI is positioned as a first-order screening approach of existing circularity metrics that may inform future research discussion of quality-differentiated approaches in EU secondary metals policy.

One key challenge in water supply systems is the aging of groundwater wells, due to clogging and corrosion, driven by complex site conditions which require a multidisciplinary approach. This paper focuses on determining the content of iron in lithostratigraphic units, and its distribution along the lithological profile, particularly in aquifer, as a potential source of iron and the causative agent for the clogging on the well screen. This paper also indicates on the activities on the definition of mechanism of transport of iron from primary lithological medium and the processes by which iron minerals are deposited onto the filter structure.