In ores, chalcopyrite is usually associated with other sulfide minerals, such as sphalerite, galena, and pyrite, in a dispersed form, with complex mineralogical structures. Concentrates obtained by flotation of such ores are unsuitable for pyrometallurgical processing owing to their poor quality and low metal recovery. This paper presents the leaching of chalcopyrite concentrate from the location “Rudnik, Serbia”. The samples from the flotation plant were treated with hydrogen peroxide in sulfuric acid. The influences of temperature, particle size, stirring speed, as well as the concentrations of hydrogen peroxide and sulfuric acid were followed and discussed. Hence, the main objective was to optimize the relevant conditions and to determine the reaction kinetics. It was remarked that the increase in temperature, hydrogen peroxide content, and sulfuric acid concentration, as well as the decrease in particle size and stirring speed, contribute to the dissolution of chalcopyrite. The dissolution kinetics follow a model controlled by diffusion, and the lixiviant diffusion controls the rate of reaction through the sulfur layer. Finally, the main characterization methods used to corroborate the obtained results were X-ray diffraction (XRD) as well as qualitative and quantitative light microscopy of the chalcopyrite concentrate samples and the leach residue.

Flotation tailings rich in carbonate minerals from the tailings deposit of the copper mine Majdanpek (Serbia) were applied for neutralization of the water taken from the extremely acidic Lake Robule (Bor, Serbia). Tests conducted in Erlenmeyer flasks showed that after neutralization of the lake water to pH 7, over 99% of aluminum (Al), iron (Fe), and copper (Cu) precipitated, as well as 92% of Zn and 98% of Pb. In order to remove residual Mn and Ag, the water was further treated with NaOH. After treatment with NaOH, all concentrations of the metals in the lake water samples were below discharge limits for municipal wastewater according to the national legislation of the Republic of Serbia. The results of this work suggest that mining waste could be used for active neutralization of the acid mine drainage. The use of the mining waste instead of lime could reduce the costs of the active treatment of the acid mine drainage.

Acid mine drainage (AMD) is a waste from mining sites, usually acidic, with high concentrations of sulfates and heavy metal ions. This study investigates the AMD neutralization process using fly ash (FA) as an alternative material. Samples of FA from coal-fired power plants in Serbia (“Nikola Tesla” (EF) and “Kostolac” (KOST)) were analyzed and used. The results were compared with the treatment efficiency of commercial neutralization agent (NaOH). The alkaline nature of FA was the basis for use in the treatment process of the extremely acid Lake Robule (pH 2.46), located in the mining areas of eastern Serbia. The optimal S/L ratio for the AMD neutralization process determined for EF was 25 wt.%, and for KOST it was 20 wt.%. The mechanism of the neutralization process was analyzed using the ANC test and PHREEQC program. The element concentrations and pH values in solutions indicated that FA samples could neutralize Lake Robule with more than 99% of Al, Fe, Cu, Zn, and more than 89% of Pb precipitated. Formation of insoluble (oxy)hydroxide forms (Fe³⁺ and Al³⁺ ions) creates favorable conditions for co-precipitation of other trace metals (Cu, Zn, Ni, Pb, and Cd) from AMD, which is further enhanced by cation adsorption on FA particles. FA proved to be a more effective neutralization agent than NaOH due to its adsorption effect, while among the FA samples, KOST was more effective due to the aging process through the carbonization reaction. Using FA as an alternative material is a promising and sustainable method for treating AMD, with economic and environmental benefits.

This paper examines sustainable industrial practices in Serbia, particularly in the mining and energy sector, focusing on the potential of flotation tailings and fly ash, as materials with the largest share in disposed waste in Serbia in 2023 (95%). It highlights the environmental challenges of mining waste and explores innovative approaches to waste management within the circular economy framework. The study analyzes the current state of mining waste in Serbia, particularly in copper mining regions in the east of the country. It discusses the potential for metal recovery from waste and its reuse in various industries. The research also investigates the use of fly ash from thermal power plants as a valuable resource in the construction industry and other sectors. The paper reviews existing initiatives and legislation in Serbia in order to promote sustainable mining practices and waste utilization. By presenting case studies and potential applications, the study demonstrates how implementing circular economy principles in the mining sector can contribute to environmental protection, resource conservation, and economic growth in Serbia. The comprehensive overview of the current state in Serbia provides a solid foundation for establishing a higher degree of circularity in the mining and energy sectors.

Electric waste from numerous devices that are put out of use every day has some form of printed circuit board that contains precious and valuable metals in their components. In order to extract these metals, the printed circuit boards were crushed and pyrolyzed into powder. The fine pyrolyzed printed circuit board (PPCB) powder was separated into fractions, and the fine metallic fraction was used as a raw material for metal leaching extraction. In order to better understand how various metal species react in leaching media, several leaching agents were used (sulfuric acid, nitric acid, glycine, and acid mine drainage-AMD) alone, and with the addition of hydrogen peroxide. Additionally, the influence of the S/L ratio and leaching temperature were investigated in sulfuric acid leaching solutions, as this is the one most widely used. In one case, the reactor was heated in a thermal bath, while in the other, it was heated in an ultrasonic bath. Lastly, several experiments were conducted with a (consecutive) two-pronged leaching approach, with and without applied pretreatment. The aim of this paper is to give a multifocal and detailed approach to how metals such as Al, Cu, Co, Zn, Sn, and Ca behave when extracted from fine PPCB powder. However, some attention is given to Nd, Pd, Pb, and Ba as well. One of the main findings is that regardless of the pretreatment or the sequence of leaching media applied, consecutive two-pronged leaching cannot be used for selective metal extraction. However, AMD was found to be suitable for selective leaching with very limited applications.

Waste-to-energy (WtE) is a key part of modern waste management. In the European Union, approximately 500 WtE plants process more than 100 million tons of waste yearly, while globally, more than 2700 plants handle over 500 million tons. Roughly 20% of the waste processed is bottom ash (BA). However, this ash can contain heavy metals in concentrations that may render it hazardous. This paper presents a study focusing on stabilizing municipal solid waste incineration BA using simple and industrially viable treatments. The Slovenian WtE plant operator wishes to install the stabilization process; thus, the samples obtained from the plant were treated (1) with a CO₂ gas flow, (2) with water spraying, and (3) with a combination of water spraying and a CO₂ gas flow under laboratory conditions. Thermodynamic calculations were applied to define potential reactions during the treatment processes in the temperature range from 0 to 100 °C and to define the equilibrium composition of the treated ash with additions of CO₂ and water. The standard leaching test EN 12457-4 of treated ash shows a reduction of over 40% in barium concentration and over 30% in lead concentration in leachates.