Marine (blue) biotechnology is an emerging field enabling the valorization of new products and processes with massive potential for innovation and economic growth. In the Mediterranean region, this innovation potential is not exploited as well as in other European regions due to a lack of a clear identification of the different value chains and the high fragmentation of business innovation initiatives. As a result, several opportunities to create an innovative society are being missed. To address this problem, eight Northern Mediterranean countries (Croatia, France, Greece, Italy, Montenegro, Portugal, Slovenia and Spain) established five national blue biotechnology hubs to identify and address the bottlenecks that prevent the development of marine biotechnology in the region. Following a three-step approach (1. Analysis: setting the scene; 2. Transfer: identification of promising value chains; 3. Capitalization: community creation), we identified the three value chains that are most promising for the Northern Mediterranean region: algae production for added-value compounds, integrated multi-trophic aquaculture (IMTA) and valorization aquaculture/fisheries/processing by-products, unavoidable/unwanted catches and discards. The potential for the development and the technical and non-technical skills that are necessary to advance in this exciting field were identified through several stakeholder events which provided valuable insight and feedback that should be addressed for marine biotechnology in the Northern Mediterranean region to reach its full potential.

This study investigates the reuse of mussel shell waste as a secondary raw material in bio-cement mortars designed for the additive manufacturing of artificial reefs for marine habitat restoration. The novelty of the research lies in combining a high recycled shell content (60 wt.%), low-clinker cement, and two 3D-printing techniques: Extruded Material Systems (EMS) and Powder-Based Systems (PBS). Mechanical performance was evaluated through flexural and compressive tests after 7, 28, and 91 days under both air and freshwater curing conditions, while environmental impacts were assessed through Life Cycle Assessment (LCA). The LCA evaluated both the environmental performance of shell-based mixtures compared with conventional materials and the impacts associated with the investigated fabrication techniques. The best-performing bio-mixtures achieved compressive strengths up to 46.01 MPa and flexural strengths up to 9.91 MPa after freshwater curing, demonstrating the suitability of shell-based mortars for submerged applications. LCA results showed reduced impacts in land use and mineral resource depletion compared with conventional mixtures, despite slightly higher energy and water demands associated with shell pre-treatment. The results demonstrate the technical and environmental feasibility of integrating aquaculture waste into sustainable 3D-printed marine restoration solutions.

The production of wind energy is one of the most mature technologies in the field of renewable energy, and the rapid technological advances bring out the need to replace the old models of wind turbines with more efficient versions. Operators must plan the management of a large amount of resource flows from the end-of-life wind farm disposal. The use of composite materials, in particular epoxy resins reinforced with glass fibers (Glass Fiber Reinforced Polymer - GRFP), most used in the wind blades, makes the material separation and recovery operations quite complex. The purpose of the study is to compare the environmental performance of the life cycle of two treatment processes (mechanical recycling and co-processing in cement kiln), identified by literature as possible technologies for the treatment of GFRP, including also the environmental benefits obtainable through the valorisation of both the waste material itself (used as fuel) and the secondary material obtained at the end of the treatment process. The LCA study provides some general considerations about the possible recycling and recovery of GFRP material contained in wind turbine blades. In general terms, it can be stated that co-processing in cement kilns is a highly efficient process because it allows energy to be recovered from the waste material and part of it to be integrated into the clinker production process.

Seawater reverse osmosis (SWRO) desalination is electricity-intensive, making its environmental performance highly dependent on the power supply. This study couples site-specific energy-system modelling with life cycle assessment to examine how renewable integration changes both total impacts and life-cycle hotspots. A modelled SWRO plant with a specific electricity consumption of 3.4 kWh m⁻³, derived from a process model for Mediterranean feedwater at 48% recovery with energy recovery devices, was assessed in Gela and Trapani, two grid-connected coastal sites with contrasting wind resources, and Lipari, a non-interconnected island with carbon-intensive backup generation. Grid-only, photovoltaic (PV)-grid, wind-grid, and PV-wind-grid configurations were modelled in HOMER Pro without storage and with excess electricity limited to 13%, then evaluated in SimaPro using Environmental Footprint 3.1. Hybrid configurations supplied 46.7%, 64.4%, and 53.3% renewable electricity in Gela, Trapani, and Lipari, reducing climate-change impacts by 30%, 42%, and 45%, respectively. Renewable integration also lowered fossil resource use, whereas PV-containing scenarios increased land and mineral/metal resource use. As electricity-related impacts declined, chemical consumption became the main non-energy hotspot, particularly for ecotoxicity, freshwater and eutrophication. Environmental performance therefore depends not only on renewable penetration, but also on technology choice and the residual electricity supply. Comprehensive system boundaries are essential when planning lower-carbon desalination for coastal and island water security.