Lisheng Zhao

Dr. Lisheng Zhao

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 January 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LZLisheng Zhao
Lisheng Zhao
SDShoulong Dong
Shoulong Dong
SXSizhe Xiang
Sizhe Xiang
SMShupei Mao
Shupei Mao
YLYuan Lei
Yuan Lei
CYChenguo Yao
Chenguo Yao
In order to solve problems, such as the nonadjustable drive pulsewidth of semiconductor lasers, in this article, an all-solid-state modular pulse current generator (PCG) topology based on a coupling inductor is proposed. Each stage of the PCG consists of one inductor, two switches, and a diode. The inductors are charged in series and discharged parallel to the load by controlling the timing. The design of the coupling inductor makes it possible to increase the energy storage density of the system. To reduce the requirement for a high-voltage power supply, the capacitor is first charged by the dc power supply, and then charge the energy storage inductor. Theoretical analysis, simulation, and prototype development verify the correctness and feasibility of the PCG. A seven-stage PCG prototype is developed: at a charging voltage of 0–500 V, an adjustable output of 0–200 A is achieved. The maximum pulsewidth can reach 5 μ s with a rise time and fall time of 100 ns at resistive–capacitive load. The repetition frequency can reach 100 Hz. Finally, the PCG is successfully applied to laser arrays.

2 May 2025 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
SDShoulong Dong
Shoulong Dong
QHQinyu Huang
Qinyu Huang
HLHuangtong Luo
Huangtong Luo
SXSizhe Xiang
Sizhe Xiang
LZLisheng Zhao
Lisheng Zhao
CYChenguo Yao
Chenguo Yao
Marx circuit is widely used in pulse-generating devices. However, in practical applications, the discharge loop of the Marx often includes stray capacitance and inductance, which can cause oscillations at the leading edge of the pulse. This article proposes an resistor-capacitor-diode (RCD) snubber circuit connected to the load in parallel to suppress waveform oscillations. First, the design of the RCD snubber circuit for the Marx pulse generator is presented, including the derivation of the equivalent circuit and characteristic equations. Next, the root locus method is applied to the analyzed parameters of the snubber circuit, determining the appropriate ranges of capacitance and resistance values for the RCD. Additionally, PSPICE simulation software is employed to verify the pulse oscillation suppression effectiveness of the RCD snubber circuit. Finally, the performance of the proposed RCD snubber circuit is tested on a Marx generator with 4 kV output voltage, 1 Hz frequency, and 500 ns pulsewidth. The test results demonstrate that the RCD snubber circuit has a great effect of oscillation suppression, which decreases the pules overshoot from 685 to 207 V, achieving a 69.8% reduction.

1 January 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SDShoulong Dong
Shoulong Dong
SXSizhe Xiang
Sizhe Xiang
LZLisheng Zhao
Lisheng Zhao
QHQinyu Huang
Qinyu Huang
HYHaobo Yang
Haobo Yang
LYliang yu
liang yu

21 April 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FWFeiyu Wu
Feiyu Wu
LZLisheng Zhao
Lisheng Zhao
SDShoulong Dong
Shoulong Dong
XZXiaoyu Zhou
Xiaoyu Zhou
WZWeirong Zeng
Weirong Zeng
LYliang yu
liang yu
In this article, an air-isolated module with adjustable insulation based on magnetic coupling resonance is proposed for high-voltage pulse generators. The insulation level can be adjusted rapidly over a wide range by changing the air gap. By virtue of invariable dielectric properties of air, the module can avoid electrical aging and reduce the risk of electrical breakdown. Tests are performed from insulation and power supply, respectively. Finally, a 24-stage air-isolated pulse generator prototype is tested. The results reveal that dc isolation level of the proposed module can be easily changed in a wide range, while maintaining stable power supply to multiple gate drivers. This module, which is no less cheap and light than existing isolators, provides a high compatible isolating solution in solid-state pulse generators under different applications.

28 December 2023 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
SDShoulong Dong
Shoulong Dong
LZLiming Zhu
Liming Zhu
SXSizhe Xiang
Sizhe Xiang
YWYancheng Wang
Yancheng Wang
ZBZongqing Bo
Zongqing Bo
LYLiang Yu
Liang Yu
In order to meet the requirements of gene electrotransfer (GET) research, a novel all-solid-state synergistic bipolar pulse generator (SBPG) is proposed in this article. It utilizes a dual Marx structure with nested high-voltage short pulse modules and low-voltage long pulse modules. This structure uses two different sets of storage capacitors, charging sources, and solid-state switches that can, respectively, control the parameters of the high-voltage long pulse and the low-voltage short pulse. An experimental prototype is built to verify the scheme, which can generate high-voltage short pulses with a maximum output voltage of $\pm$ 12 kV and adjustable pulsewidth from 100 ns to 1 $\mu $ s. Additionally, it can generate low-voltage long pulses with a maximum output voltage of $\pm$ 3 kV and adjustable pulsewidth from 10 to 100 $\mu$ s. The combination of high-voltage short pulses and low-voltage long pulses is adjustable in various forms. We have established a biological experimental platform for GET. The results show that the transfection efficiency of bipolar microsecond pulses exceeds that of unipolar microsecond pulses, and the transfection efficiency of bipolar synergistic pulses exceeds that of bipolar nanosecond pulses and verifies that SBPG is compatible with the feasibility of GET.

6 April 2026 in Applied Physics Letters
Verified
Journal Article
Closed access
LZLisheng Zhao
Lisheng Zhao
YSYiran Shu
Yiran Shu
SXSizhe Xiang
Sizhe Xiang
CYChenguo Yao
Chenguo Yao
SDShoulong Dong
Shoulong Dong
Needle-based electrical impedance tomography (EIT) is a crucial modality for the real-time monitoring of irreversible electroporation (IRE) in deep-seated tumors. However, under the conventional adjacent drive pattern, the effective field of view is physically confined within the convex hull of the electrode array due to current constriction, which prevents the assessment of lateral ablation boundaries. Here, we proposed an EIT paradigm integrating a panoramic hybrid transmission topology with spatially adaptive sensitivity compensation (SASC). Guided by the principle of minimum power dissipation, trans-array distal current injection is used to activate fringing fields, which forces current penetration beyond the periphery of the array. Concurrently, the SASC strategy that uses virtual aperture synthesis is developed to counteract the suppression of weak far-field signals inherent in conventional regularization algorithms. Numerical simulations conducted on three circular inclusions with a radius of 2.5 mm (left exterior x = 5 mm, central x = 15 mm, right exterior x = 25 mm) verified that the proposed method distinctly resolves all targets and achieves uniform normalized amplitudes across the panoramic FOV, with the contrast of targets outside the convex hull being comparable to that of the central inclusions. Importantly, the method maintains stable, high-fidelity performance under 30 dB of noise, a level typical of clinical intraoperative environments, and exhibits excellent anti-noise robustness across the entire imaging domain. This approach preserves high central resolution while transforming a localized probe into a panoramic imager and provides a robust technical foundation for real-time assessment of safety boundaries during large-volume IRE ablation.