The selection of a hull design with minimal drag is an important effort to reduce emission levels on ships. Two different hull shapes, U and V hulls, have unique properties that affect their drag production, which has been studied extensively in the past. This study aims to re-examine the differences between the two hull types by conducting a simple analysis of drag prediction results using empirical and numerical slender body methods. Both hull models in this study have the same size and volume. The results indicate that the U hull has a higher frictional resistance ( ) than the V hull due to its wider wetted surface area ( ). Additionally, the viscous pressure resistance ( ) and form factor coefficient ( ) of the U hull are also higher than those of the V hull. However, for Froude numbers (Fr) above 0.245, the U hull has lower wave resistance ( ) than the V hull, whereas for Fr below 0.245, the U hull has higher . Overall, the U hull produces a higher total resistance ( ) than the V hull at low speeds, but a lower at high speeds. Therefore, the choice of hull shape for minimizing a ship's resistance is influenced by the desired speed of service. If Fr is low, below 0.24, a V-shaped hull is more suitable. However, if Fr is higher than 0.24, a U-shaped hull is more appropriate.
15 December 2023 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Marine fouling, such as heavy slime, is the result of algae and other invertebrates settling and growing on the surfaces of planning hulls that are immersed in water. This may result in a range of serious and costly economic problems. The amount of resistance that planning hulls encounter when operating in maritime settings is an important aspect that considerably impacts the performance, energy efficiency, and operational expenses associated with these hulls. Because of this, the focus of this investigation will be on high-speed planning craft ships. In recent years, there has been a rise in the number of instances in which this sort of ship has been used for military, commercial, and recreational purposes. With the use of CFD analysis, the purpose of this study is to conduct an exhaustive investigation into the effect that the surface roughness of heavy slime has on the resistance of planing hulls. The results will be compared to a reference scenario, including a hydrodynamically smooth hull, to determine how much heavy slime affects resistance. According to the findings of this research project, the presence of heavy slime on the surface of a high-speed planing ship had a significant impact on the performance of the ship, particularly on the friction resistance, which saw an increase of up to 65% as a consequence of the presence of the slime. The results of this study will have substantial repercussions for ship designers, naval architects, and operators. The findings will provide them with useful information that will allow them to improve hull designs and devise effective tactics for fouling management.
20 May 2025 in PESHUM : Jurnal Pendidikan, Sosial dan Humaniora
This comprehensive analysis examines the effectiveness of cooperative learning (CL) in undergraduate engineering education, contrasting it with traditional teacher-centered methods. The study finds that CL enhances academic performance and develops essential skills such as critical thinking, teamwork, and communication. Unlike passive teacher-centered methods, CL promotes active participation and collaborative problem-solving, better aligning educational outcomes with the demands of the engineering profession. The article highlights the limitations of teacher-centered learning, which often fails to foster deep understanding or student engagement. CL, involving students in diverse, role-defined groups, helps them connect theory to practice, particularly benefiting first-year students transitioning into collaborative environments. However, challenges to implementing CL include student resistance, higher instructor workload, and the need for effective group management. The study stresses the importance of faculty training, discipline-specific resources, and structured support to address these obstacles. Ultimately, the article advocates for a shift toward CL in engineering education, emphasizing its potential to prepare students for collaborative, dynamic engineering roles in a technologically advanced world.
4 February 2024 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Fast ferries with efficient fuel use are becoming increasingly in demand as fossil fuels become more in short supply and metropolises expand all over the globe in coastal and estuarine environments. These criteria need to be fulfilled by the Hydrofoil Supported Catamaran (HYSUCAT). A catamaran with wings between its demi hulls is known as an HYSUCAT, and it combines the positive traits of both the catamaran (manoeuvrability, big deck area) and the wing in-ground vehicle (excellent lift-to-drag ratio). In this research, a concept design Delft-372 catamaran is refitted with a high Reynolds number foil system to lower its overall resistance. The numerical solution of the Reynolds-averaged Navier–Stokes (RANS) equations employing the k-w SST turbulence model is used to simulate the flow around a high-speed catamaran with a hydrofoil. According to the simulation findings, the hydrofoil-assisted catamaran was determined to be a viable alternative to the current catamaran. This is due to a significant decrease in the overall resistance of the ship, reaching up to 42%, as well as notable improvements in pitch angle, reaching up to 26%.