The continuous development of internet of things (IoT) infrastructure and applications is paving the way for advanced and innovative ideas and solutions, some of which are pushing the limits of state-of-the-art technology. The increasing demand for Wireless Sensor Nodes (WSNs) able to collect and transmit data through wireless communication channels, while often positioned in locations that are difficult to access, is driving research into innovative solutions involving energy harvesting (EH) and wireless power transfer (WPT) to eventually allow battery-free sensor nodes. Due to the pervasiveness of radio frequency (RF) energy, RF EH and WPT are key technologies with the potential to power IoT devices and smart sensing architectures involving nodes that need to be wireless, maintenance free, and sufficiently low in cost to promote their use almost anywhere. This paper presents a state-of-the-art, ultra-low power 2.5 $\mathsf{\mu }$ W highly integrated mixed signal system on chip (SoC), for multi-source energy harvesting and wireless power transfer. It introduces a novel architecture that integrates an ultra-low power intelligent power management, an RF to DC converter with very low power sensitivity and high power conversion efficiency (PCE), an Amplitude-Shift-Keying/Frequency-Shift-Keying (ASK/FSK) receiver and digital circuitry to achieve the advantage to cope, in a versatile way and with minimal use of external components, with the wide variety of energy sources and use cases. Diverse methods for powering Wireless Sensor Nodes through energy harvesting and wireless power transfer are implemented providing related system architectures and experimental results.

The huge number of electronic devices called the Internet of Things requires miniaturized, autonomous and ecologically sustainable power sources. A viable way to power these devices is by converting mechanical energy into electrical through electro-active materials. The most promising and widely used electro-active materials for mechanical energy harvesting are piezoelectric materials, where the main one used are toxic or not biocompatible. In this work, we focus our attention on biocompatible and sustainable piezoelectric materials for energy harvesting. The aim of this work is to facilitate and expedite the effort of selecting the best piezoelectric material for a specific mechanical energy harvesting application by comprehensively reviewing and presenting the latest progress in the field. We also identify and discuss the characteristic property of each material for each class to which the material belong to, in terms of piezoelectric constants and achievable power.

The diffusion of electronics in everyday life requires for the development of sensing systems, based on new materials and technologies. Deformation sensors are of interest in many application fields, ranging from assisted rehabilitation, virtual reality and augmented reality, and gaming applications, juts to mention a few. investigated. More specifically, it is shown that this novel composite is capable of sensing flexural deformations and producing a corresponding open-circuit voltage. The obtained results pave the road to the possibility of realizing a new class of deformation sensors that fits the requirements of more sustainable sensor technologies.

The field of Internet of Things (IoT) technologies is advancing rapidly, driven by the critical need for autonomous and sustainable wireless sensor networks

In several application fields, plasmonic sensor platforms combined with bio-receptors are intensively used to obtain biosensors. Most of these commercial devices are based on a disposable chip. Usually a gold chip, functionalized with a specific bio-receptor, inside a costly sensor system, is used. In this work, we propose a low-cost and small-size sensor system, used for monitoring a disposable plasmonic chip, based on an innovative optical waveguide made of bacterial cellulose (BC). In particular, we have sputtered gold on the green slab waveguide that is able to excite localized surface plasmon resonance (LSPR). Experimental results are presented on the capabilities of using the BC-based composite as an eco-friendly plasmonic sensor platform, which could be exploited for realizing disposable biosensors. The sensor has been used with optical fibers and simple equipment. More specifically, the fibers connect the green disposable LSPR sensor with a light source and with a spectrometer. The novel plasmonic sensing approach has been tested using two different optical waveguide configurations of BC, with and without ions inside BC.

In this paper, an environmentally friendly inertial sensor is proposed and characterized. The sensor has been realized by using bacterial cellulose, impregnated by using ionic liquids, and covered by conducting polymers, as the electrodes. The composite has mechano-electric transduction capabilities, which are exploited for realizing a generating sensor. More specifically, the system is mounted in cantilever configuration and used for sensing the anchor acceleration. Results of the chemical and transduction characterization of the composite as an accelerometer are reported in the paper.