This study shows the contribution of silver nanoparticles mixed with macro-encapsulated phase change material (PCM) in a double slope solar still. Experiments are carried out in three different depths and settings, first using simple double slope solar still, then by addition of PCM, and finally using PCM mixed with silver nanoparticles. Results obtained are compared during the sunshine period and also after sunset. The study shows that the silver nanoparticles in PCM results in reducing the yield and efficiency of the double slope solar still by 7.64% and 5.26% during the charging period. However, it continues to deliver potable water even after sunset due to the stored latent heat in the PCM. The higher thermal capacity of the PCM and the higher thermal conductivity of the silver nanoparticles resulted in a 16% increase in drinking water yield and a 62.53% rise in the thermal efficiency of the double slope solar still. The final cost per liter of the potable water generated using the double slope solar still was reduced to 3.80 INR and the payback time is 2 years which can be reduced further using PCM and nano-enhanced PCM inside the solar still.
28 July 2018 in International Journal of Turbo & Jet-Engines
The control of co-flowing jets by varying lip thickness has been studied experimentally. Lip thickness is defined as the thickness of primary nozzle wall separating primary jet and secondary jet at the co-flowing nozzle exit. Co-flowing jets from a primary nozzle of diameter 10 mm (1.0 Dp) and a secondary duct with lip thickness (LT) 0.2 Dp, 1.0 Dp and 1.5 Dp at Mach numbers 0.6, 0.8 and 1.0 have been studied. Jet centreline total pressure decay, static pressure variation and jet mixing behaviour were analysed. The results show that the mixing of the co-flowing jet with substantial values of lip thickness is superior to the co-flowing jets with comparatively lower values of lip thickness. Co-flowing jets with lip thickness 1.0 Dp and 1.5 Dp experience a significantly higher mixing than the lip thickness 0.2 Dp jet, for all Mach numbers analyzed in the present study. Moreover, in the case of correctly expanded jets, the local static pressure is assumed to be equal to atmospheric pressure. This assumption becomes invalid for co-flowing jets with substantial lip thickness. The centerline static pressure varies sinusoidally above and below atmospheric pressure by a maximum of 11 %, which is due to wake dominance.
18 June 2018 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
The effects of bypass ratio on co-flowing subsonic and correctly expanded sonic jet decay have been studied experimentally. Co-flowing jets with lip thickness 1.0 Dp (where Dp is the diameter of primary nozzle and is equal to 10 mm) with bypass ratios of around 0.7, 1.4, and 6.4 at primary jet exit Mach numbers 0.6, 0.8, and 1.0 have been analyzed. A single free jet equivalent to primary nozzle of the co-flowing nozzle was considered for comparison. Primary jet centerline total pressure decay, spread, and static pressure variation were investigated. The results show that the mixing of the high bypass ratio co-flowing jet with lip thickness 1.0 Dp is superior to low bypass ratio co-flowing jet. Both lip thickness and bypass ratio have a strong influence on the co-flowing jet mixing. Bypass ratio 6.3 experiences a significantly higher mixing than bypass ratio 0.7 and 1.4. Selected jets were also investigated computationally. The computations capture the salient flow physics and reproduce well with the experiments.
16 April 2020 in Aircraft Engineering and Aerospace Technology
Purpose: This study aims to analyze co-flowing jets (CFJs) with constant velocity ratio (VR) and varying primary nozzle lip thickness (LT) to find a critical LT in CFJs below which mixing enhances and beyond which mixing inhibits. Design/methodology/approach: CFJs were characterized with a constant VR and varying LTs. A single free jet with a diameter equal to that of a primary nozzle of the CFJ was used for characteristic comparison. Numerical simulation is carried out and is validated with the experimental results. Findings: The results show that within a critical limit, the mixing enhanced with an increase in LT. This was signified by a reduction in potential core length (PCL). Beyond this limit, mixing inhibited leading to the elongation of PCL. This limit was controlled by parameters such as LT and constant VR. A new region termed as influential wake zone is identified. Practical implications: In this study, the VR is maintained constant and bypass ratio (BR) was varied from low value to very high values. Presently, subsonic commercial turbo fan operates under low to ultra-high BR. Hence the present study becomes vital to the current scenario. Originality/value: To the best of the authors’ knowledge, this is the first effort to find the critical value of LT for a constant VR for compressible co-flow jets. The CFJs with constant VR and varying LT have not been studied in the past. The present study focuses on finding a critical LT below which mixing enhances and above which mixing inhibits.