In recent years, many researchers have focused on the preparation of carbon and basalt fiber-reinforced composites. As a result, the composites have gained popularity as an alternative to traditional materials such as wood, steel, and aluminum. Carbon and basalt fibers were used in a bidirectional woven mat, with particulates varying from 0 to 15 wt% nanoparticle SiC. The hybrid laminates were fabricated through vacuum bag infusion methods. The novelty of the research work lies in studying the influence of nanoparticle SiC-combined carbon and basalt fibers arranged in six stacking sequences, with LY556 used as polyester matrix. Specimens were prepared and tested as per ASTM standards. Tensile, flexural, impact, and hardness tests were performed on the obtained specimens and average values were obtained. It was found that 15% SiC filler addition enhanced (20%) the mechanical properties. Scanning electron microscope photos revealed the bonding between the fiber mat and the matrix of thecrystal structure. The obtained tensile strength was 346 MPa and the flexural strength was 388 MPa. Dynamic mechanical analysis showed that mechanical properties were improved with the addition of 15% SiCnanoparticles. Hence, this method can be used to manufacture structural applications and automotive parts.
5 May 2021 in Journal of Thermal Analysis and Calorimetry
This study shows the contribution of silver nanoparticles mixed with macro-encapsulated phase change material (PCM) in a double slope solar still. Experiments are carried out in three different depths and settings, first using simple double slope solar still, then by addition of PCM, and finally using PCM mixed with silver nanoparticles. Results obtained are compared during the sunshine period and also after sunset. The study shows that the silver nanoparticles in PCM results in reducing the yield and efficiency of the double slope solar still by 7.64% and 5.26% during the charging period. However, it continues to deliver potable water even after sunset due to the stored latent heat in the PCM. The higher thermal capacity of the PCM and the higher thermal conductivity of the silver nanoparticles resulted in a 16% increase in drinking water yield and a 62.53% rise in the thermal efficiency of the double slope solar still. The final cost per liter of the potable water generated using the double slope solar still was reduced to 3.80 INR and the payback time is 2 years which can be reduced further using PCM and nano-enhanced PCM inside the solar still.