A frequency Tunable (mechanical tuning) Linearly Polarized (TLP) rectangular Dielectric Resonator Antenna(DRA) coupled with a horizontal/vertical-slot and excited with circular-ring type feed is investigated in this article.The frequency tunability (mechanical tuning) is achieved by the rotation of slot at different angles of the proposedstructure. Hence, two linearly polarized antennas have been proposed for different frequency bands such as Wi-MAX and Sub-6 GHz/5G, respectively, using slot variations (named as DRA-1 and DRA-2). TE 11δ mode has been excited in both the DRAs and confirmed by orientation of electric field inside the rectangular DRA. The measured -10 dB input impedance bandwidths of DRA-1 offer 21.60 % being centered at 2.87 GHz and the separation of co-polarized and cross-polarized field levels is above -24 dB in the broadside direction (xz-plane). Whereas DRA-2 offers measured -10 dB input impedance bandwidths of 23.03% being centered at 3.56 GHz having a separation of co-polarized and cross-polarized field levels are above -23 dB in the broadside direction (xz-plane). In addition, the proposed DRA-1 and DRA-2 show a maximum gain of 5.23 dBi and 4.75 dBi in broadside direction, respectively.
29 September 2023 in Multimedia Tools and Applications
This paper presents a miniaturized planar dual-band short-ended metamaterial antenna with the backed ground plane to improve antenna bandwidths and radiation characteristics. The proposed dual-band metamaterial (MTM) antenna has been made up of the composite right- or left-handed transmission line (CRLH-TL) concept. Here, the backed ground plane has been employed to generate an extra coupling capacitance (CC), which shifts the ZOR frequency in the lower band while also improving ZOR matching and increasing the impedance bandwidth of the higher-order mode. In this proposed MTM antenna, interdigital capacitance (IDC) has been used in place of a simple series gap, which shifts the higher-order impedance bandwidth into a lower frequency band for second-band Wi-MAX applications (3.33.7GHz). The proposed antenna offers a short-ended MTM, and hence the ZOR frequency is controlled by a series of LC lumped parameters. The proposed antenna offers dual-band behavior with measured 10dB impedance bandwidths of 5.55 and 41.57 at centered frequencies of 2.70GHz and 4.33GHz, respectively. The overall electrical size of the designed antenna is 0.225λ0×0.144λ0×0.0144λ0 at ZOR (f0=2.70GHz), where λ0 is the free space wavelength; therefore, it is applicable for different Wi-MAX application bands (2.52.7GHz/3.33.8GHz). Furthermore, the proposed dual-band MTM antenna provides compactness, low loss, stable gain, and radiation efficiency, and also offers omnidirectional radiation patterns in the E-plane and dipolar type radiation patterns in the H-plane, respectively.
19 April 2023 in International Journal of Communication Systems
Face has been a prominent biometric trait and is widely appropriated for several tasks. One such a task is ‘kinship verification’ which primarily focuses on examining whether a disposed image pair appertains to a same family or not Kinship verification system grabs a large apportion of applications which are advantageous to the society. A convolutional neural network specific algorithm which can function as classifier between ‘kin’ and ‘non-kin’ categories has been proposed in this work. The proposed approach incorporates a novel deep learning based layered neural network architecture. This approach is evident to enact superior performance than a few reported algorithms and the classification entirely depends upon CNN specific feature vectors. We have applied the proposed technique on the Kinship Face in Wild (KinFaceW) dataset version - I which can be publicly obtained. Under a standard experimentation protocol, we have achieved an average verification accuracy of 86.94%.