Rajkishor Kumar

Dr. Rajkishor Kumar

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
STSreenath Reddy Thummaluru
Sreenath Reddy Thummaluru
RKRajkishor Kumar
Rajkishor Kumar
RCRaghvendra Kumar Chaudhary
Raghvendra Kumar Chaudhary
In this paper, a new frequency selective surface (FSS) based isolation technique is proposed for multiple-input-multiple-output (MIMO) antennas. In the proposed method, a conventional ground plane of monopole based MIMO antenna is replaced with FSS to improve the isolation between the antenna elements as well as to reduce MIMO antenna radar cross-section (RCS). In this paper, two FSS designs have been presented, and they are named as FSS and M_FSS. M_FSS is a slightly modified version of FSS. With FSS, isolation enhancement and RCS reduction have been achieved by altering antenna characteristics. With M_FSS, the same can be achieved by preserving the antenna characteristics. The RCS reductions of 25 dBsm and 20 dBsm have been achieved by replacing the PEC ground plane with FSS and M_FSS respectively. Also, by using the proposed FSS, a stable RCS reduction up to 60° for TE polarization and up to 45° for TM polarization has been achieved. The proposed MIMO antenna with FSS has been fabricated and the simulation results are experimentally verified.

1 December 2015 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
RKRajkishor Kumar
Rajkishor Kumar
RCRaghvendra Kumar Chaudhary
Raghvendra Kumar Chaudhary
A wideband circularly polarized cubic-shaped dielectric resonator antenna (DRA) was excited with a new question-mark-shaped microstrip feed, which provides two orthogonal modes with a quadrature phase difference, hence generating circular polarization. The proposed antenna offers measured - 10-dB impedance bandwidth of 35.35% (at center frequency 3.14 GHz) and measured 3-dB axial-ratio bandwidth of 20.62% (centered on 3.29 GHz) in the broadside direction. The proposed DRA shows the maximum gain and radiation efficiency of 1.51 dB and 90.65%, respectively, in the operating band. It was observed that the proposed antenna is left-hand circular polarized. This antenna is useful for WiMAX (3.3-3.7 GHz) applications.

27 September 2022 in IET Communications
Verified
Journal Article
Open access
AKArvind Kumar
Arvind Kumar
Ayman A. AlthuwaybAyman A. Althuwayb
Ayman A. Althuwayb
DCDivya Chaturvedi
Divya Chaturvedi
RKRajkishor Kumar
Rajkishor Kumar
FAFarnaz Ahmadfard
Farnaz Ahmadfard
A novel circularly polarized (CP) substrate integrated magneto‐electric dipole (MED) antenna has been designed for appropriate wireless communication. The antenna comprises two printed radiating arc‐shaped patches and a feeding strip on top, two rows of embedded metallic vias, and a ground plane. A coax probe is used to excite the patches and via rows simultaneously with the help of a printed feeding strip. Finally, the antenna design has been prototyped and its performance experimentally was verified in terms of impedance bandwidth, axial‐ratio (AR), gain, efficiency, and radiation patterns. The measured impedance bandwidth (under −10 dB) and AR bandwidth (under 3 dB) are 6.15–7.01 (13%) GHz and 6.24–6.40 (2.53%) GHz respectively. Typically, the measured gain value within 3‐dB AR bandwidth at 6.3 GHz is 4.5 dBic with average measured in‐band antenna efficiency of 85.2%. Moreover, the proposed antenna shows an acceptable agreement with predicted counterparts, including unidirectional radiation patterns.

1 January 2019 in IEEE Antennas and Propagation Magazine
Verified
Journal Article
Closed access
RKRajkishor Kumar
Rajkishor Kumar
STSreenath Reddy Thummaluru
Sreenath Reddy Thummaluru
RCRaghvendra Kumar Chaudhary
Raghvendra Kumar Chaudhary

17 October 2023 in IEEE Sensors Journal
Verified
Journal Article
Closed access
TGThennarasi Govindan
Thennarasi Govindan
SPSandeep Kumar Palaniswamy
Sandeep Kumar Palaniswamy
MKMalathi Kanagasabai
Malathi Kanagasabai
Sachin KumarSachin Kumar
Sachin Kumar
RARajesh Agarwal
Rajesh Agarwal
DPDamodar Panigrahy
Damodar Panigrahy
This work portrays the design and analysis of an ingestible capsule multiple-input-multiple-output (MIMO) antenna for wireless capsule endoscopy for animal husbandry. The proposed antenna element has a footprint of 0.18λ 0 × 0.107λ 0 × 0.002λ 0 , which is transformed into a four-port MIMO antenna and bent into a cylindrical profile of 8.92 mm radius with dimensions of 0.184λ 0 × 0.136λ 0 × 0.002λ 0 . Designed MIMO configuration consists of asymmetric extended fork-shaped radiators with U-slotted strips and meandered connected ground planes. The developed MIMO set is housed inside a polylactide capsule that mimics a real-time pill camera. The capsule antenna operates at the ISM (2.45 GHz) and UWB (3.1-10.6 GHz) frequencies. The link budget analysis and diversity metrics of the MIMO antenna are evaluated by embedding it inside the capsule. The MIMO bolus sensor antenna prototype is implanted in the skin mimicking gel and its impedance/radiation characteristics are studied. The estimated specific absorption rate is found to be within the standard acceptable limits. Furthermore, machine learning approach is introduced for classification of animal type and early detection of animal medical illness, making it suitable for use in animal husbandry-capsule endoscopy, biomedical and biotelemetry applications due to its conformal and biocompatible nature.

26 November 2015 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
RKRajkishor Kumar
Rajkishor Kumar
RCRaghvendra Kumar Chaudhary
Raghvendra Kumar Chaudhary