This paper proposes a new damage index named degree of health (DoH) to efficiently tackle structural damage monitoring in real-time. As a key contribution, the proposed index relies on a pattern matching methodology that measures the time-of-flight mismatch of sequential ultrasonic guided-wave measurements using fuzzy logic fundamentals. The ultrasonic signals are generated using the transmission beamforming technique with a phased-array of piezoelectric transducers. The acquisition is carried out by two phased-arrays to compare the influence of pulse-echo and pitch-catch modes in the damage assessment. The proposed monitoring approach is illustrated in a fatigue test of an aluminum sheet with an initial notch. As an additional novelty, the proposed pattern matching methodology uses the data stemming from the transmission beamforming technique for structural health monitoring. The results demonstrate the efficiency and robustness of the proposed framework in providing a qualitative and quantitative assessment for fatigue crack damage.

Multimaterial solutions that combine adhesively bonded composite and metallic parts are being widely proposed as lightweighting strategies to reduce environmental impact. However, the introduction of adhesive interphases in components subjected to fatigue loads is a major concern in terms of durability, reliability and maintainability. Structural health monitoring (SHM) techniques can play a key role in providing structures with self‐sensing capabilities. Although the use of ultrasonic guided wave (UGW) monitoring for predicting the damage of in‐service adhesive joints has been proved feasible, several challenges remain, including the generation of large and high‐quality data sets and the scalability of damage detection algorithms for real‐world use cases. After a wide literature review of available algorithms and simulation techniques, the simplest yet accurate methods have been selected to build a methodology that may eventually be fostered with more complex models. In this work, a numerical–experimental integrative methodology is proposed to train predictive algorithms minimizing the need for extensive experimental campaigns, by creating synthetic data sets through physics‐based simulation models. Although several features have been detected as damage‐sensitive, simple regression models using the root‐mean‐square density (RMSD) have been trained and validated as damage indicators. The feasibility of this approach has been proven in a real subcomponent with an error below 2% in the debonding length prediction, calculated as the ratio of the Euclidean distance between actual debonding and predicted debonding to the total inspection length.

In this paper, we introduce an advanced AI-based solution for predicting structural damage in aircraft laminates. Our innovative approach focuses on detecting and locating fatigue damage within composite structures, thereby enhancing the assessment of aircraft health and usage. By leveraging state-of-the-art ultrasonic guided wave (UGW) inspection simulations of composite laminates integrated with piezoelectric transducers, comprehensive datasets are extracted efficiently. The signals captured by the piezoelectric sensors are utilized to engineer key features sensitive to composite structural damage, which are then used to train a deep neural network (DNN) for accurate structural damage prediction. Our findings demonstrate the significant potential of combining advanced simulation techniques with machine learning to improve the accuracy and reliability of structural health monitoring in aerospace applications.

Composite laminates experience static and fatigue delamination, presenting significant challenges for failure prediction. This is critical in curved composites, where delamination behavior is complex to predict. In this study, fatigue tests were conducted on curved composite laminates under non-constant mixed-mode conditions. The testing setup involved a four-point bending test using L-shaped, unidirectional carbon-fiber-reinforced polymer curved beam specimens. A Teflon insert placed at the bend was used to initiate delamination. Experimental data acquisition included digital image correlation (DIC) to monitor delamination length during testing. This is important since it enhances subsequent model correlation. A virtual crack closure technique (VCCT)-based method for simulating fatigue-driven delamination under variable mixed-mode conditions was validated against experiments. Delamination growth was modeled using a Paris-like power–law relationship based on the strain energy release rate. The approach was implemented in Abaqus as a user subroutine, incorporating load ratio and mode mixity effects through VCCT-based mode separation. This study demonstrates accurate fatigue delamination prediction and highlights the role of optical measurements in experiments. The model improves our understanding of delamination propagation under varying mode mixity and contributes to structural integrity analysis. The results show how mode mixity influences delamination, impacting the performance and lifecycle of composite structures.

Structural Health Monitoring (SHM) in aerospace applications requires accurate detection and characterization of impact events to ensure operational safety and reduce maintenance costs. This work presents an experimental framework for developing physically informed machine learning models that leverage embedded PVDF-TrFE transducers for acoustic emission (AE) monitoring. Representative composite coupons were instrumented with PVDF-TrFE sensors and subjected to controlled impact tests at varying energy levels to generate AE datasets under pristine and damaged conditions. The experimental campaign was designed to capture key features associated with impact occurrence, localization, and energy quantification in critical regions of aerostructures. To enhance model robustness and scalability, experimental data were fused with synthetic datasets derived from high-fidelity numerical simulations, enabling the integration of physical constraints into the learning process. This hybrid approach aims to improve generalization across different geometries and loading scenarios, paving the way for future deployment on full-scale aerospace components. Preliminary results indicate that the proposed methodology can identify impact events and estimate their severity with promising accuracy, while ongoing work focuses on refining localization and energy quantification metrics. The study demonstrates the potential of combining advanced sensing technologies with physics-informed data-driven models for next-generation SHM systems in aerospace applications.

Carbon-fibre reinforced polymer (CFRP) laminates are susceptible to both static and fatigue-driven delamination. Predicting this type of failure in curved composite structures, often referred to as delamination by unfolding, remains a critical challenge. This work presents the development of a Virtual Crack Closure Technique (VCCT)-based computational method for simulating fatigue-driven delamination propagation under non-constant mixed-mode conditions. The fatigue delamination growth model follows a phenomenological approach based on a Paris–Erdogan-based power-law relationship, where the delamination propagation rate depends on the strain energy release rate. This methodology has been implemented as a user-defined subroutine, UMIXMODEFATIGUE, for Abaqus, integrating the effects of load ratio and mode mixity conditions while leveraging the mode separation provided by VCCT. The proposed approach is validated against an experimental case involving a four-point bending test applied to an L-shaped CFRP curved beam specimen with a unidirectional layup. Unlike the existing standard configuration, the proposed test campaign introduces a non-adhesive Teflon foil insert at the bend, placed within the midplane layers to act as a delamination initiator, representing a manufacturing defect. In addition to the testing machine, digital image correlation (DIC) is used to monitor delamination length. The simulation method developed accurately predicts fatigue delamination propagation under varying mode mixity at the delamination front. By improving delamination modelling in composites, this approach supports timely maintenance and helps prevent fatigue failures. Additionally, it deepens the understanding of how the mode mixity influences the delamination propagation process.