Fan Feng

Dr. Fan Feng

Hunan Institute of Engineering, Xiangtan, Hunan, China
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2022 in CCS Chemistry
Verified
Journal Article
Open access
ZSZhoutai Shang
Zhoutai Shang
BSBin Song
Bin Song
HLHongbao Li
Hongbao Li
HZHong Zhang
Hong Zhang
FFFan Feng
Fan Feng
Qianwang ChenQianwang Chen
Qianwang Chen
Ambient electrochemical nitrogen fixation is a promising and environmentally benign route for producing sustainable ammonia, but has been limited by the poor performance of existing catalysts that ... Description

21 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJianhua Lei
Jianhua Lei
FFFan Feng
Fan Feng
SXShu Xu
Shu Xu
WWWeibin Wen
Weibin Wen
XHXuhui He
Xuhui He
The objective of the present research was to study the effect of temperature on the mechanical properties, failure mode and uniaxial compression constitutive relationship of a modified polyurethane concrete. A total of 24 cube and 27 prism specimens were fabricated, and the uniformity of the polyurethane concrete was checked. The compressive test, splitting tensile test and static uniaxial compression test were carried out at 0, 15, 40 and 60 °C. The failure mode, cube compressive strength, splitting tensile strength, axial compressive strength, elastic modulus and the compressive stress–strain curves of the modified polyurethane concrete were obtained. Based on the experimental results, a uniaxial compression constitutive model of the modified polyurethane concrete considering temperature characteristics was proposed. The results show that the elastic modulus, cubic compressive strength, splitting tensile strength and axial compressive strength of the modified polyurethane concrete decrease with the increase of temperature, and the peak strain and ultimate strain increase significantly. When the temperature rises from 0 to 60 °C, the cubic compressive strength, splitting tensile strength and axial compressive strength are decreased by 67.1%, 66.4% and 73.3%, respectively. The calculation results of the proposed constitutive model are in good agreement with the test results. The results are expected to guide the application of the modified polyurethane concrete in bridge deck pavement.

16 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
FZFeiyan Zhang
Feiyan Zhang
FFFan Feng
Fan Feng
XLXiang Liu
Xiang Liu
In concrete structures, replacing conventional steel bars with high-strength steel reinforcement (HSSR) can effectively save the use of materials. However, the deformation properties and strength dispersion of HSSR are different from those of conventional steel reinforcement, which restricts or conservatively uses them in practical applications. For example, the partial safety factor of HRB500 grade steel bars (the yield strength is 500 MPa) in guideline GB50010-2010 is larger than that of conventional steel bars, and there is no relevant guidance for HRB600 grade steel bars (the yield strength is 600 MPa). Based on this, this paper will propose the limit state design method of high-strength steel reinforced concrete beam (HSSRCB) based on reliability analysis, which is convenient for the popularization and use of HSSR. Firstly, the flexural performance test of HSSRCBs was introduced, and the flexural capacity of HSSRCB was analyzed based on the existing prediction model. Second, a sectional numerical analysis model was established, where the section was discretized into several points, and then the curvature was gradually increased to obtain the corresponding bending moment through integration. A large number of samples were calculated to obtain statistical characteristics of the error of prediction model. Then, the limit state functions were established for two kinds of format, including partial safety factor format (PSSF) and resistance reduction factor format (RRFF), respectively, and the reliability of HSSRCBs was analyzed based on Monte Carlo simulation. Finally, the recommended values of partial safety factor of material and reduction factor of bearing capacity were proposed, in which the design strength of HRB500 and HRB600 reinforcement was 454 MPa and 545 MPa for PSSF, respectively, and the resistance reduction factor for the flexural capacity of HSSRCB was 0.8 and 0.75 for RRFF, respectively.

27 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
YHYanqun Han
Yanqun Han
XMXiandong Meng
Xiandong Meng
FFFan Feng
Fan Feng
XSXuming Song
Xuming Song
FHFanglin Huang
Fanglin Huang
WWWeibin Wen
Weibin Wen
Modified polyurethane concrete (MPUC) is a new material for steel deck pavements. In service, the pavement is often cracked due to excessive tensile stress caused by temperature changes. In order to study the tensile properties of MPUC in the diurnal temperature range of steel decks, uniaxial tensile tests of MPUC were carried out at five temperatures. Three kinds of specimens and a novel fixture were designed and fabricated to compare the results of four different tensile test methods. The deformation of the specimen was collected synchronously by two methods: pasting strain gauge and digital image correlation (DIC) technique. Based on the experiment, the tensile mechanical properties, failure modes, and constitutive relations of MPUC were studied under the effect of temperature. The research results show that the novel fixture can avoid stress concentration. By observing the fracture surface of the specimens, the bonding performance is great between the binder and the aggregate at different temperatures. The tensile strength and elastic modulus of MPUC decrease with increasing temperatures, while the fracture strain, and fracture energy increase with increasing temperatures. The formulas of temperature-dependent tensile strength, fracture strain, and elastic modulus of MPUC were established, and the constitutive relationship of MPUC is further constructed in the rising stage under uniaxial tension. The calculation results show good agreement with experimental ones.

2 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
ZTZhongping Tang
Zhongping Tang
HPHua Peng
Hua Peng
PMPingbo Mei
Pingbo Mei
FHFanglin Huang
Fanglin Huang
SYShixiang Yi
Shixiang Yi
FFFan Feng
Fan Feng
It is unknown whether Ferronickel slag (FNS)-ordinary Portland cement (OPC)-based pervious concrete (FOPC) is feasible. To this end, a feasibility study was conducted on FOPC. Firstly, a detailed microscopic examination of the FNS powder was conducted, encompassing analyses of its particle size distribution, SEM, EDS, and chemical composition. These analyses aimed to establish the suitability of a composite of FNS and OPC as a composite cementitious material. Subsequent experimentation focused on evaluating the compressive strength of the composite paste material with varying mixed proportions, revealing a slight reduction in strength as the FNS substitution rate increased. Furthermore, the study designed eighteen different mix proportions of FOPC to investigate the key physical properties, including porosity, density, compressive strength, and the coefficient of permeability. Findings indicated that increases in the cementitious material proportion correlate with enhanced concrete strength, where the ratio of cementitious to aggregate increased by 6.7% and 16.5%, and the strength of FOPC increased by 10–13% and 30–50%, respectively. Conversely, a rise in the FNS substitution rate led to a reduction in compressive strength across different mix ratios. Additionally, the ratio of paste material to aggregate was found to significantly influence the permeability coefficient. These comprehensive performance evaluations suggest that incorporating FNS into OPC for pervious concrete applications is a feasible approach, offering valuable insights for the promotion of waste reuse and the advancement of energy conservation and emissions reduction efforts.

12 May 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
LWLei Wu
Lei Wu
FFFan Feng
Fan Feng
XMXiandong Meng
Xiandong Meng
XLXiang Liu
Xiang Liu
During the long-term operation of an urban railway viaduct, it is subjected to multiple cyclic loads caused by the movement of a vehicle. As a result, the fatigue life of the bridge should be fully considered during the design process. Furthermore, the bridge structure will be subject to environmental corrosion for an extended period of time, resulting in concrete carbonization and reinforcement corrosion, which aggravates the bridge structure’s fatigue damage. To compensate for the disadvantage of the traditional static analysis method’s inability to consider vehicle speed, a vehicle–bridge system coupled model is established, material corrosion is considered, railway bridge damage under vehicle load is analyzed, and the service life of common 30 m and 25 m span bridges is calculated. The results show that ignoring corrosion will understate the bridge damage, and vehicle speed has a significant impact on bridge fatigue life. Finally, the recommended operating speeds for 30 m span and 25 m span bridges are provided.