This paper presents an automatic algorithm for mapping floods. Its main characteristic is that it can detect not only inundated bare soils, but also floodwater in urban areas. The synthetic aperture radar (SAR) observations of the flood that hit the city of Houston (Texas) following the landfall of Hurricane Harvey in 2017 are used to apply and validate the algorithm. The latter consists of a two-step approach that first uses the SAR data to identify buildings and then takes advantage of the Interferometric SAR coherence feature to detect the presence of floodwater in urbanized areas. The preliminary detection of buildings is a pre-requisite for focusing the analysis on the most risk-prone areas. Data provided by the Sentinel-1 mission acquired in both Strip Map and Interferometric Wide Swath modes were used, with a geometric resolution of 5 m and 20 m, respectively. Furthermore, the coherence-based algorithm takes full advantage of the Sentinel-1 mission’s six-day repeat cycle, thereby providing an unprecedented possibility to develop an automatic, high-frequency algorithm for detecting floodwater in urban areas. The results for the Houston case study have been qualitatively evaluated through very-high-resolution optical images acquired almost simultaneously with SAR, crowdsourcing points derived by photointerpretation from Digital Globe and Federal Emergency Management Agency’s (FEMA) inundation model over the area. For the first time the comparison with independent data shows that the proposed approach can map flooded urban areas with high accuracy using SAR data from the Sentinel-1 satellite mission.
A fully automated processing chain for near real-time mapping of burned forest areas using Sentinel-2 multispectral data is presented. The acronym AUTOBAM (AUTOmatic Burned Areas Mapper) is used to denote it. AUTOBAM is conceived to work daily at a national scale for the Italian territory to support the Italian Civil Protection Department in the management of one of the major natural hazards, which affects the territory. The processing chain includes a Sentinel-2 data procurement component, an image processing algorithm, and the delivery of the map to the end-user. The data procurement component searches every day for the most updated products into different archives. The image processing part represents the core of AUTOBAM and implements an algorithm for burned forest areas mapping that uses, as fundamental parameters, the relativized form of the delta normalized burn ratio and the normalized difference vegetation index. The minimum mapping unit is 1 ha. The algorithm implemented in the image processing block is validated off-line using maps of burned areas produced by the Copernicus Emergency Management Service. The results of the validation shows an overall accuracy (considering the classes of burned and unburned areas) larger than 95% and a kappa coefficient larger than 80%. For what concerns the class of burned areas, the commission error is around 1%−3%, except for one case where it reaches 25%, while the omission error ranges between 6% and 25%.
The Mediterranean region is frequently struck by severe rainfall events causing numerous casualties and several million euros of damages every year. Thus, improving the forecast accuracy is a fundamental goal to limit social and economic damages. Numerical Weather Prediction (NWP) models are currently able to produce forecasts at the km scale grid spacing but unreliable surface information and a poor knowledge of the initial state of the atmosphere may produce inaccurate simulations of weather phenomena. The STEAM (SaTellite Earth observation for Atmospheric Modelling) project aims to investigate whether Sentinel satellites constellation weather observation data, in combination with Global Navigation Satellite System (GNSS) observations, can be used to better understand and predict with a higher spatio-temporal resolution the atmospheric phenomena resulting in severe weather events. Two heavy rainfall events that occurred in Italy in the autumn of 2017 are studied—a localized and short-lived event and a long-lived one. By assimilating a wide range of Sentinel and GNSS observations in a state-of-the-art NWP model, it is found that the forecasts benefit the most when the model is provided with information on the wind field and/or the water vapor content.
15 September 2021 in IEEE Geoscience and Remote Sensing Letters
Previous studies have shown that the decrease of temporal interferometric synthetic aperture radar (InSAR) coherence could be exploited to detect the appearance of floodwater in urban areas. However, as of today, approaches based on this principle only make use of single co-polarization images for identifying the presence of floodwater in the double-bounce feature. In this study, we take advantage of both co- and cross-polarization images to detect significant decreases of the multitemporal InSAR coherence in order to enhance the mapping of floodwater in urban areas. We consider that not only double-bounce scattering, but also multiple-bounce may occur in urban areas depending on how the building facades are oriented with respect to the synthetic aperture radar (SAR) sensor’s line of sight. The Sentinel-1 (S-1) mission is particularly well suited for applying and testing this kind of approach due to the systematic availability of dual-polarization data. Using as a test case, the widespread flooding in the city of Houston, USA, caused by Hurricane Harvey in 2017, we demonstrate that the proposed methodology leads to an increase of the accuracy of the urban flood maps from 75.2% when only using the VV polarization, to 82.9% when using the dual polarization information.
This paper presents a theoretical study of microwave remote sensing of vegetated surfaces. The purpose of this study is to find out if satellite bistatic radar systems can provide a performance, in terms of sensitivity to vegetation geophysical parameters, equal to or greater than the performance of monostatic systems. Up to now, no suitable bistatic data collected over land surfaces are available from satellite, so that the electromagnetic model developed at Tor Vergata University has been used to perform simulations of the scattering coefficient of corn, over a wide range of observation angles at L- and C-band. According to the electromagnetic model, the most promising configuration is the one which measures the VV or HH bistatic scattering coefficient on the plane that lies at the azimuth angle orthogonal with respect to the incidence plane. At this scattering angle, the soil contribution is minimized, and the effects of vegetation growth are highlighted.
The use of SAR data for flood mapping is well established. However, the problem of the missed detection of rapidly evolving floods remains. Recently, the Italian Space Agency deployed the COSMO-SkyMed Second Generation (CSG) constellation, with an on-demand capability that makes it possible to reduce the number of missed floods. However, for on-demand SAR acquisitions, pre-flood images are generally not available, and change-detection methods, commonly adopted for flood mapping using SAR, cannot be applied. This study focused on the high-resolution CSG images of a flood that occurred in central Italy. An accurate analysis of the radar responses of the different targets included in the scenes observed by GSG was performed. Then, a methodology to detect floods using high-resolution single SAR images was developed. The methodology was based on image segmentation and fuzzy logic. Image segmentation allowed us to analyze homogeneous areas in the CSG images. Fuzzy logic was used to integrate the SAR data with ancillary information that was useful when change-detection methods could not be applied. A comparison with the maps produced by the Copernicus Emergency Service, using high-resolution optical images, demonstrated the reliability of the methodology.