Data from the CYGNSS mission, originally conceived to monitor tropical cyclones, are being investigated here for land applications as well. In this paper, a methodology for soil moisture (SM) retrieval from CYGNSS data is presented. The approach derives Level 3 gridded daily SM estimations, over the latitudinal band covered by CYGNSS, at a resolution of 36 km × 36 km, using the CYGNSS reflectivity over land, coupled with ancillary vegetation and roughness information from the SMAP mission. The results are compared globally with SM measurements from SMAP, which are assumed to be ground truth, showing a good agreement, and a global root-mean-square difference of 0.07 cm3/cm3. A more extensive comparison is performed over two test regions—Texas in the United States and New South Wales in Australia—where reference data from SMAP are complemented with measurements from the SMOS mission. The results over both regions are generally consistent with the global results, and a good agreement is observed between CYGNSS and reference SM measurements from SMAP and SMOS. The study demonstrates that SM can be successfully retrieved from the CYGNSS mission on a global scale and using ancillary information about the overlying vegetation and the characteristics of the soil. The results open up further future perspectives for global, high-resolution SM products from spaceborne Global Navigation Satellite System-Reflectometry data.

An algorithm developed to map flooded areas from synthetic aperture radar imagery is presented in this paper. It is conceived to be inserted in the operational flood management system of the Italian Civil Protection and can be used in an almost automatic mode or in an interactive mode, depending on the user's needs. The approach is based on the fuzzy logic that is used to integrate theoretical knowledge about the radar return from inundated areas taken into account by means of three electromagnetic scattering models, with simple hydraulic considerations and contextual information. This integration aims at allowing a user to cope with situations, such as the presence of vegetation in the flooded area, in which inundation mapping from satellite radars represents a difficult task. The algorithm is designed to work with radar data at L, C, and X frequency bands and employs also ancillary data, such as a land cover map and a digital elevation model. The flood mapping procedure is tested on an inundation that occurred in Albania on January 2010 using COSMO-SkyMed very high resolution X-band SAR data.

This paper presents an automatic algorithm for mapping floods. Its main characteristic is that it can detect not only inundated bare soils, but also floodwater in urban areas. The synthetic aperture radar (SAR) observations of the flood that hit the city of Houston (Texas) following the landfall of Hurricane Harvey in 2017 are used to apply and validate the algorithm. The latter consists of a two-step approach that first uses the SAR data to identify buildings and then takes advantage of the Interferometric SAR coherence feature to detect the presence of floodwater in urbanized areas. The preliminary detection of buildings is a pre-requisite for focusing the analysis on the most risk-prone areas. Data provided by the Sentinel-1 mission acquired in both Strip Map and Interferometric Wide Swath modes were used, with a geometric resolution of 5 m and 20 m, respectively. Furthermore, the coherence-based algorithm takes full advantage of the Sentinel-1 mission’s six-day repeat cycle, thereby providing an unprecedented possibility to develop an automatic, high-frequency algorithm for detecting floodwater in urban areas. The results for the Houston case study have been qualitatively evaluated through very-high-resolution optical images acquired almost simultaneously with SAR, crowdsourcing points derived by photointerpretation from Digital Globe and Federal Emergency Management Agency’s (FEMA) inundation model over the area. For the first time the comparison with independent data shows that the proposed approach can map flooded urban areas with high accuracy using SAR data from the Sentinel-1 satellite mission.

In case of a seismic event, a fast and draft damage map of the hit urban areas can be very useful, in particular when the epicentre of the earthquake is located in remote regions, or the main communication systems are damaged. Our aim is to analyse the capability of remote sensing techniques for damage detection in urban areas and to explore the combined use of radar (SAR) and optical satellite data. Two case studies have been proposed: Izmit (1999; Turkey) and Bam (2003; Iran). Both areas have been affected by strong earthquakes causing heavy and extended damage in the urban settlements close to the epicentre. Different procedures for damage assessment have been successfully tested, either to perform a pixel by pixel classification or to assess damage within homogeneous extended areas. We have compared change detection capabilities of different features extracted from optical and radar data, and analysed the potential of combining measurements at different frequency ranges. Regarding the Izmit case, SAR features alone have reached 70% of correct classification of damaged areas and 5 m panchromatic optical images have given 82%; the fusion of SAR and optical data raised up to 89% of correct pixel‐to‐pixel classification. The same procedures applied to the Bam test case achieved about 61% of correct classification from SAR alone, 70% from optical data, while data fusion reached 76%. The results of the correlation between satellite remote sensing and ground surveys data have been presented by comparing remotely change detection features averaged within homogeneous blocks of buildings with ground survey data.

The use of synthetic aperture radar (SAR) data is presently well established in operational services for flood management. Nevertheless, detecting inundated vegetation and urban areas still represents a critical issue, because the radar signatures of these targets are often ambiguous. This paper analyzes the role of the interferometric coherence in complementing intensity SAR data for mapping floods in agricultural and urban environments. The advantages of the joint use of intensity and coherence are first discussed in a theoretical way and then verified on a case study, namely, the flood that hit the Emilia-Romagna region (Northern Italy) in January 2014. The short revisit time of the COSMO-SkyMed images, as well as a dedicated acquisition plan tailored to the requirements of the Italian Civil Protection Department, has allowed us to build a data set of radar interferometric observations of the event. Results show that the analysis of the multitemporal trend of the coherence is useful for the interpretation of SAR data since it enables a considerable reduction of classification errors that could be committed considering intensity data only. Interferometric data have permitted us to distinguish zones where water receded from areas where it persisted for a longer time and, in one case, to measure changes of water level.