This study investigates the effects of particle convexity, sphericity and aspect ratio (AR) on the behaviour of sheared granular materials using two-dimensional discrete element method simulations. Isotropic, dense and loose assemblies with different particle shapes were prepared and subjected to drained shearing via biaxial compression until the critical state was reached. Macroscopic characteristics such as strength and dilatancy are presented. The factors underlying the macroscopic behaviour are then investigated by considering the coordination number, fabric anisotropy, particle moment, friction mobilisation at contacts and particle rotation. For the range of shapes considered here, the data indicate that the shear strength decreases as particle convexity and sphericity increases while the shear strength increases with increasing AR. The shear strength and convexity are weakly correlated, however a stronger correlation is observed between AR and strength. The volumetric strain at large strains tends to increase with increasing AR. There is a stronger correlation between the critical state strength and both the critical state coordination number and the critical state mechanical void ratio than there is between the critical state void ratio and the critical state strength. The contact fabric anisotropy, the magnitude of the moment transmitted by particles and the friction mobilised at the contacts are important factors underlying strength. The critical state strength increases as both the mean particle moment and the mean mobilised friction increased. Analysis of particle rotation provides insights into the response of the granular materials to shearing.
This study investigates the interplay between particle shape, grading and initial sample density, three of the most important factors influencing the mechanical behaviour of sheared granular assemblies. Using the discrete element method (DEM), two-dimensional assemblies of varying initial sample density, particle aspect ratio, $$AR$$ , and coefficients of uniformity, $${C}_{u}$$ , were prepared and subjected to drained biaxial shearing until the critical state was reached. We assessed the interplay between each of these parameters by evaluating whether the effect of any given parameter on a mechanical quantity is influenced by any other parameter. Our analyses show that the effect of some of these key parameters on mechanical response, can indeed be influenced by other key parameters. The effect of the particle $$AR$$ on the peak shear strength for the initially dense assemblies differs when compared with the medium-dense assemblies. The mechanical coordination number of the assemblies at the initial state correlates with the peak strength thereby explaining the interplay between particle $$AR$$ and initial sample density on the peak shear strength. The linear relationship established between strength and dilatancy for a combination of all assemblies studied suggests that the strength-dilatancy relationship is a unique characteristic of granular assemblies. The dilatancy of the assemblies correlates strongly with the amount of contacts lost during shearing. The interplays found between particle shape, grading and initial sample density in this study show that to develop robust constitutive models for the prediction of granular material behaviour, the effects of multiple factors must be considered. Graphic abstract
In this paper a bump-less process is introduced in order to further scale down the pitch of microbumps. Electrical resistance measurement, Cross section SEM and mechanical characterizations show successful 3D stacking using proposed method.
Cementitious composites are ubiquitous in construction, and more and more research is focused on improving mechanical properties and environmental effects. However, the jury is still out on which material can achieve low-carbon and high-performance cementitious composites. This article compares the mechanical and environmental performance of zero-dimensional fullerenes, one-dimensional carbon nanotubes (CNTs), two-dimensional graphene oxide (GO), and three-dimensional nano-graphite platelets (NGPs) on cementitious composites. The literature review shows that two-dimensional (2D) GO has the best mechanical and environmental performance, followed by 3D NGPs, 1D CNTs, and 0D fullerenes. Specifically, GO stands out for its lower energy consumption (120–140 MJ/kg) and CO2 emissions (0.17 kg/kg). When the optimal dosage (0.01–0.05 wt%) of GO is selected, due to its high specific surface area and strong adhesion to the matrix, the compressive strength of the cementitious composites is improved by nearly 50%. This study will help engineers and researchers better utilize carbon-based nanomaterials and provide guidance and direction for future research in related fields.