Due to the extremely high porosity and extremely low density of nano-porous thermal insulation materials, the characteristic size of the pores inside the materials and the characteristic size of the solid skeleton structure are on the nanometer scale, which leads to the obvious nanoscale effect of the heat transfer law inside the aerogel materials. Therefore, the nanoscale heat transfer characteristics inside the aerogel materials and the existing mathematical models for calculating the thermal conductivity of various heat transfer modes at the nanoscale need to be summarized in detail. Moreover, in order to verify the accuracy of the thermal conductivity calculation model of aerogel nano-porous materials, correct experimental data are required to modify the model. Because the medium is involved in radiation heat transfer, the existing test methods have a large error, which brings great difficulties to the design of nano-porous materials. In this paper, the heat transfer mechanism, characterization methods, and test methods of thermal conductivity of nano-porous materials are summarized and discussed. The main contents of this review are as follows. The first part introduces the structural characteristics and specific application environment of aerogel. In the second part, the characteristics of nanoscale heat transfer of aerogel insulation materials are analyzed. In the third part, the characterization methods of thermal conductivity of aerogel insulation materials are summarized. In the fourth part, the test methods of thermal conductivity of aerogel insulation materials are summarized. The fifth part gives a brief conclusion and prospect.
Monitoring the health status of aerospace structures during their service lives is a critical endeavor, aimed at precisely evaluating their operational condition through observation data and physical modeling. This study proposes a probabilistic assessment approach utilizing Dynamic Bayesian Networks (DBNs), enhanced by an improved adaptive particle filtering technique. This approach combines physical modeling with various predictive sources, encompassing cognitive uncertainties inherent in stochastic predictions and crack propagation forecasts. By employing crack observation data, it facilitates predictions of crack growth and the residual life of metal structure. To demonstrate the efficacy of this method, the research leverages data from three-point bending and single-edge tension fatigue tests. It gathers data on crack length during the fatigue crack progression, integrating these findings with digital twin theory to forecast the residual fatigue life of the specimens. The outcomes show that the adaptive DBN model can precisely predict fatigue crack propagation in test specimens, offering a potential tool for the online health assessment and life evaluation for aerospace structures.
For aerogels in metal thermal protection system (MTPS), radiative heat transfer will participate in the thermal transport process. Therefore, the influence of the emissivity of the coupling interface between metal and aerogels on thermal insulation performance is considered an important research focus. In this paper, CFD numerical simulation is performed to study the influence of emissivity on the performance with different extinction coefficients at different boundary temperatures. The finite volume method and the discrete ordinate method are used to solve the govern equations. The results show that when the boundary temperatures are 600 K and 2100 K, the extinction coefficient is 50 m−1, and the reduction percentage of the effective thermal conductivity with an emissivity of 0.2 can be up to 47.5% and 69.8%, compared to the system with an emissivity of 1. Thus, the reduction in emissivity has a good effect on the thermal insulation performance of the MTPS at a higher boundary temperature for materials with small extinction coefficients.
Radiative heat transfer in aerogels (semi-transparent materials) acts as a participating medium, causing notable errors in conventional steady-state thermal conductivity measurements. Coupled conduction–radiation heat transfer is numerically simulated to examine the influence of variations in the heating plate-specimen interface emissivity on thermal conductivity measurements, and the simulation results are experimentally validated using test systems with differing interface emissivities. The results show that the effect of interface emissivity on effective thermal conductivity is more obvious under high temperatures and low extinction coefficients. When the average temperature is 1273 K, the emissivity decreases from 1 to 0.2, and the effective thermal conductivity with extinction coefficients of 3.5 m−1 and 3500 m−1 decreases by 76.1% and 24.1%, respectively. Experimental results show that when the hot surface temperature is 873 K, the cold surface temperature differences in different test systems can reach 30 K. The experimental results have the same trend as the steady-state simulation results, which verifies the accuracy of the numerical simulations. Quantitative analysis of the steady-state heating measurement results demonstrates the effect of medium radiation in semi-transparent materials on the obtained results. The findings contribute to a more accurate characterization of silica aerogel composites and provide new insights into the influence of radiative heat transfer on thermal conductivity evaluation in semi-transparent aerogel materials, which is important for the development and application of aerogel-based thermal insulation systems.
The enhancement effect and mechanism of porous frameworks on hydrogel thermal control performance are key factors in evaluating their engineering applications and performance improvements. This study investigates the enhancement mechanism of porous framework composite phase-change materials (CPCM) on hydrogel thermal control performance through multi-scale visualization comparison experiments. Results indicate that pure hydrogels, due to their dense internal structure, hinder water vapor escape, thereby impeding overall fluidity and mass transfer rates. The introduction of a porous framework significantly improves internal heat transfer and moisture transport pathways within the hydrogel, enabling smooth water vapor release during heating and preventing localized heat accumulation. Under 100 °C heating conditions, CPCM exhibited a 65% reduction in mass-specific dehydration rate compared to pure hydrogel, with a 25% lower temperature drop. Energy efficiency increased by 13.5% over hydrogel, while the coefficient of variation decreased by 34.1%, demonstrating superior thermal stability and temperature control capabilities. This study elucidates from a mechanistic perspective how porous frameworks regulate the thermal and mass transfer behaviors of hydrogels, providing a theoretical basis and experimental support for their advanced application and optimization in the thermal control systems of electronic devices.